Jump to content

Aircraft Review : Boeing 767-300ER Professional by VMAX and Flight Factor


Stephen

Recommended Posts

767pw-300er_header-700px1.jpg
 
Aircraft Review : Boeing 767-300ER Professional by VMAX and FlightFactor
 
After the huge success of the late 1950's and throughout the 1960's for the Boeing Commercial Airplane's Company with their Boeing 707/727/737 and Widebodied Boeing 747 aircraft, it was always going to be a challenge for Boeing and keep their lead in the aviation production business to develop and create the next advanced series of passenger jets. Other manufacturers went down the Twin-Aisle three-engined designs that was signified by the McDonnell Douglas DC-10 and the Lockhead L-1011 Tristar.
 
Originally Boeing with the code-named 7X7 looked to be going down that route of three engine design, but the Airbus A300 from Europe changed the design to the more common current layout with Twin-Aisle, Twin-Engined aircraft as engine design and power had now progressed to allow big twins to have the power and range over their three engined counterparts in that now highly competitive mid-medium to large-size, long-range market.
 
Still Boeing backed its card hand both ways, not only announcing the Boeing 767 as their Twin-Engine Design to cover the Twin-Aisle market, but to also build a Single-Aisle aircraft in the Boeing 757 code-named 7N7, and both aircraft have a commonality design that was shared over the two different types of airframes, in the thinking that airlines would buy and operate both types with a single commonality rating with a small conversion to the larger Boeing 767. Three variants of the Boeing 767 were planned: a 767-100 with 190 seats, a 767-200 with 210 seats, and a trijet 767MR/LR version with 200 seats intended for intercontinental routes. The 767MR/LR was subsequently renamed 777 for differentiation purposes which was when finally launched a vastly different aircraft for a different market.
 
The prototype Boeing 767 aircraft, registered N767BA and equipped with JT9D turbofans, rolled out on August 4, 1981. By this time, the 767 program had accumulated 173 firm orders from 17 customers, including Air Canada, All Nippon Airways, Britannia Airways, Transbrasil, and Trans World Airlines (TWA). On September 26, 1981, the prototype took its maiden flight under the command of company test pilots Tommy Edmonds, Lew Wallick, and John Brit.
 
This version in the FlightFactor/StepToSky release is the The 767-300ER, the extended-range version of the 767-300. Which entered service with American Airlines in 1988. The type's increased range was made possible by greater fuel tankage and a higher MTOW of 407,000 lb (185,000 kg). Design improvements allowed the available MTOW to increase to 412,000 lb (187,000 kg) by 1993. Power is provided by Pratt & Whitney PW4000, General Electric CF6, or Rolls-Royce RB211 engines. This aircraft is the Pratt & Whitney PW4000 version.
 
FlightFactor/StepToSky
 
FlightFactor and Roman Berezin has no need of introduction for most fliers in X-Plane Simulation. Their Boeing 777 WorldLiner and Boeing 757 Series have made them the very best of the Boeing designed (and official product) available for X-Plane. Their foray into Airbus territory with their Airbus A350-900 also shows the design group's versatility. Here with the Boeing 767-300ER FlightFactor still uses the talents of avionics designer Phillipp Munzel, but are also now joined by StepToSky designers Denis Maslov and Alexander Khudekov, but the full development team is thirteen highly specialised individuals coming together to create this highly developed iconic aircraft the.... Boeing 767-300ER
 
767PW-300ER_Head 1.jpg767PW-300ER_Head 5.jpg
767PW-300ER_Head 3.jpg767PW-300ER_Head 4.jpg
767PW-300ER_Head 2.jpg767PW-300ER_Head 6.jpg
 
Review
 
You couldn't cover every aspect of this review with a simple walkaround the aircraft and point to point flight like I usually write, because different points of the flying pointed to different areas to be explored. So this review covers three sector flights, not the quite Golden Triangle of some of the busiest air routes in the world between BNE-Brisbane (Queensland) to ADL- Adelaide (South Australia) to SYD - Sydney (New South Wales) and finally back to BNE....  MEL - Melbourne (Victoria) missed out because I wanted the longer stretch sector to Adelaide and the longer one back to SYD. When in service (All Boeing 767 aircraft have only earlier this year have been retired by QF Qantas) in the past three decades with Qantas these routes were its main service points (and also PER-Perth) and I have flown on a lot of flights on this aircraft over these routes. 
So there is a little mixture in the look of some images in this review here as they are taken not in order as I usually do, but overall throughout the three distinct flying sectors.
 
External
 
767PW-300ER_Ground 1.jpg767PW-300ER_Ground 2.jpg
767PW-300ER_Ground 3.jpg767PW-300ER_Ground 4.jpg
 
There is a distinctly different feel to the Boeing 767, yes it looks like FF's Boeing 757 and B777 series aircraft and that design feel is certainly strongly still prominent. But there is a different technique at work here in the way the aircraft's outer-skins are presented. The design of the fuselage is simply exemplary, but what you are looking at is in fact two fuselage's in objects. The usual standard inner version, but now also another object fuselage built over it. This outer object creates a brilliant shine over the aircraft (a sort of holy grail in X-Plane) and gives you (another X-Plane holy grail) great chrome surfaces. These reflective chrome areas are noticeable around the inner front wing surfaces and in the front areas of the engine inlet cowling surfaces.  Certainly static images do not give these reflections a good representation of their quality and shininess, but they are very, very good.
 
Externally the aircraft is excellent, how much detail do you want? how much more can you include in small detailing details? To highlight the sort of detailing you have here we will focus on an area, which is the wings and undercarriage (to cover every detail would take a small manual).
 
767PW-300ER_Ground focus.jpg767PW-300ER_Ground focus 2.jpg
 
leading edge and trailing edge wing design is excellent, fully detailed and animated. The B767 uses a unique inner flap arrangement called a "Hinged Beam Four Bar Linkage" with Fowler flap, because of the interference of a drag problem the linkage has a shallow but wide fairing which was small enough to allow it to fix the drag problems. A variation was used on the Boeing 777 in the "upsidedown/upright four bar linkage" flap system.
 
The Boeing 767 wings are swept at 31.5 degrees and optimized for a cruising speed of Mach 0.8 (533 mph or 858 km/h). Each wing features a supercritical cross-section and is equipped with six-panel leading edge slats, leading single-and double-slotted flaps, inboard and outboard ailerons, and six spoilers.
 
Inner wing detailing is overwhelming, only when the wing is fully extended do you get the full detailing shown, amazing detail is what you get for your money today. The B767 here is one of the best yet.
 
767PW-300ER_Ground focus 3.jpg767PW-300ER_Ground focus 4.jpg
 
As is the undercarriage design, complex and fully animated you get every link, pipe, nut and bolt in perfect harmony, it is simply a miniature version of the real gear system, but the real aspect of this undercarriage quality is in the motion of their working sum of parts, put the aircraft down in a heavy side wind and you see the whole system working to its maximum, the gear compresses and wheels work with the tarmac, and even the Hydraulic piping will flex and move to the gear movement. You can spend hours with replays watching the motions in action.
 
767PW-300ER_Ground focus 5.jpg767PW-300ER_Ground focus 6.jpg
 
767PW-300ER_Ground 5.jpg767PW-300ER_Ground 6.jpg
 
So external design is extraordinary good, every fuselage join, rivet, and body construction is perfectly realized, smaller items like pitot tubes, aerials, rudder and flap joints are all there to look for and see, only slight blemish is the front strut lights can shine through the doors, which is common theme with most X-Plane aircraft (noting a Laminar Research issue and not a developers one). There is the choice between the old original straight edge wing design and the newer upturned Aviation Partners blended winglets.
 
Internal
 
767PW-300ER_Internal 1.jpg767PW-300ER_Internal 2.jpg
 
Internally it is a quick glance left into the cockpit, but let us have a look at the cabin first.
 
767PW-300ER_Internal 3.jpg767PW-300ER_Internal 4.jpg
 
767PW-300ER_Internal 5.jpg767PW-300ER_Internal 6.jpg
 
Two class cabin in five across in two - one - two first/business and seven across two - three - two in the main economy section, all blue seating is very 80's in seating design. Cabin is well designed and laid out, the fittings look the period that the aircraft was built in and the overhead lockers are tiny compared to the huge bins we have today. Overall the cabin is excellent.
 
767PW-300ER_Windows 7.jpg767PW-300ER_Windows 8.jpg
 
Cabin has "Dynamic windows" (shades) that open and close to the angle of the sun like on the FF B757, but here you have the option of turning them off (thank you), for the windowhuggers the view out is excellent, early versions of the FF B767 had very dark orange opacity window view, but thankfully for the release they have been made a lot clearer and more enjoyable.
 
Cockpit first look.
 
767PW-300ER_Cockpit 1.jpg767PW-300ER_Cockpit 2.jpg
 
767PW-300ER_Cockpit 3.jpg767PW-300ER_Cockpit 4.jpg
 
The cockpit experience is astounding, this aircraft is not fully "cold and dark" because it is waiting for a transition crew to take it on to Adelaide.
 
767PW-300ER_Cockpit 5.jpg767PW-300ER_Cockpit 8.jpg
 
767PW-300ER_Cockpit 9.jpg767PW-300ER_Cockpit 7.jpg
 
The surrounding cockpit does feel different, but sit in the captains seat and it all suddenly becomes very familiar. If you already have the FlightFactor Boeing 757 Series you will find this view and all the controls, knobs and switchgear just like home, everything is the same and the only changes are the ones you can't see which is the aircraft's weights, fuel loads and fuel burn, all round the aircraft is of course heavier than its cousin in 99790 kg (220,000 lb) for the Boeing 757 which has a Max - takeoff weight to the higher 179168 kg (395,000 lbs) GTW for the Boeing 767-300ER.
 
767PW-300ER_Panel 1.jpg767PW-300ER_Panel 2.jpg
 
From a pilots instrument perspective this is not a complicated aircraft, there are only the same basic tools that you would find on even a regional turboprop aircraft. It is in the setting up detail that makes this aircraft a professional machine.
This aircraft had some of the early glass style cockpits, not the full sized panels you see today, but the early style cathode ray tube (CRT) designs. These screens were and are fitted here usually two CRT's and the top smaller one is for the PFD (Primary Flight Display) and lower CRT is is for the MAP/NAV display. Two more larger CRT's cover the aircraft's performance and status are situated mid-panel. The rest of the instruments are standard clockwork gauges and dials.
 
We will get a better understanding of the PFD/NAV displays when flying, so I will pass over them for now. But the standard gauges and dials are on the Pilot's/Captain's side far left is the main Airspeed dial (KNOTS/MACH) combined and below is the Radio Distance Magnetic Indicator (RDMI) that shows DME-VOR/ADF distances and with dual needles display (switchable).
Right of the CRT's is the "Autoland Status" which can be switched to Auto1/Auto2/Manual on the OHP.
Below is the Altitude indicator with barometric settings. Lower is the Vertical Speed Indicator from 0 - 6000fpm, bottom is the timer/clock.
 
Centre are three standby/backup dials in Artificial Horizon, Airspeed dial and Altitude indicator. Autobrake setting knob is here as well. First officer right side position has exactly the same instrument layout, but there are a few extra dials and displays in a "Brake Pressure" dial, TAS/Cº display, Gear up/down lever, Flap position display (1, 5, 10, 20, 25, 30 degrees) and engine thrust parameter limits selection panel (also known as "thrust management".
 
As noted the panel looks complicated but it is really quite a simple layout.
 
767PW-300ER_Panel AP.jpg767PW-300ER_Panel AP Freq.jpg
 
Autopilot (AP) is very standard Boeing, so if you have flown any Boeing flightdecks then you would be very familiar with the layout, like the B757 each end of the AP is a frequency setting (VOR 1/NAV 1) left and VOR2/NAV2 right) both CRS (Course) setting knob are here as well.
 
767PW-300ER_Cockpit 13.jpg767PW-300ER_Cockpit 14.jpg
 
There is slight (very slight) differences on the OHP (OverHead Panel), but the familiarity aspect is very strong. All areas on this FlightFactor aircraft are covered in systems and switchgear, the panel is very comprehensive in detail. Main panels are Electrical, APU (Auxiliary Power Unit), Hydraulics, Electronic Engine Control (EEC), Inertial reference, Oxygen, heating (external and internal), Air-Conditioning, Bleed and Pneumatic air, Cooling and anti-ice, call panel, Fuel and aircraft lighting.
 
767PW-300ER_Cockpit 10.jpg767PW-300ER_Cockpit 11.jpg
 
Pedestal (or Aislestand) is well laid out as well, The central Throttle (engine reverse), Stab trim, flap lever, speed brake lever of course dominate the panel, The two start/cutoff fuel control switches are buried at the rear of the throttle set.
EFIS (electronic Flight Instrument System) panels are available for both Captain/First Officer and again a replication and use of exactly the same units on the B757. Engine, Cargo and APU fire controls and main radio communications panels are mid-section, rear is the ADF/NDB frequency dials and that difficult to find VOR1/ILS frequency radio set (click lower knob to activate). far rear is your Aileron/rudder trim wheels/knob.
 
There is a right side rear service panel, that is for observers and monitoring general aircraft systems.
 
MCDU and Flightplanning
 
767PW-300ER_MCDU.jpg
 
MCDU (Multipurpose Control Display Unit) in the Boeing 767-300ER is one of the best in X-Plane. Bulletproof and well designed, you can easily programme in your aircraft's operating parameter's and route planning. Both Captain/First Officer MCDU's pop out for ease of use and are independent of each other. You can use it on your iPad as well and there is comprehensive instructions provided on the way to connect X-Plane to your iPad or if you already have that installed for the B757 system, the same one will work here also.
 
767PW-300ER_MCDU 1.jpg767PW-300ER_MCDU 2.jpg
767PW-300ER_MCDU 3.jpg767PW-300ER_MCDU 4.jpg
767PW-300ER_MCDU 5.jpg767PW-300ER_MCDU 7.jpg
767PW-300ER_MCDU SID.jpg767PW-300ER_MCDU 6.jpg
 
Setting up the route is very easy, select your departure (YBBN) and arrival (YPAD) airports, select your RWY 19 and SID (Standard Instrument Departure) and "Trans" point in my case LARAVALE "LAV", sometimes you may be required to select from a selection of NAV-AIDS to select the right one is to look at the co-ordinates. Then input your route waypoints and I tend to go for DME-VOR and NDB fixes for ease of input and distance measuring. On ARR (Arrival) you select RWY23 your STAR (Standard Terminal Arrival Route) which is the opposite of your SID and here it is "BLACK SIX" (A note is that I usually have to edit a STAR section to get the best approach, shouldn't have to, but I usually do?), when done then EXEC or activate the FlightPlan, you can save your route and also use flightplans you created in the FF B757 by moving them to the Plugins/767Avionics/routes file (the routes are in the same place on the B757). You can check your route by in the EFIS select PLN mode for the NAV/MAP display and press "SELECT" R6 Key to move down the list.
 
767PW-300ER_MCDU Takeoff Ref.jpg767PW-300ER_MCDU Approach Ref.jpg
 
To get the best performance out of these aircraft it comes down to the way you programme and set up the aircraft with weights and balances, you get help of course which we will come to in a minute. But the professional serious pilots of you out there know the good nitty gritty is in the minor details of flight planning. To show the serious depth of programming in performance with the FF Boeing 767 it is how much detail is now available for you. It is certainly important to set up your aircraft's weights and fuel before doing the final calculations in the FMC (Flight Management Computer), if not it can alter your flightplan and it will need re-editing to fit in the new settings, worse it can ruin a STAR approach and you will need for serious editing to get the correct flow to lineup with the runway.  But get the W&F numbers right and there is bounty of information at your disposal.
 
767PW-300ER_MCDU Position Report.jpg767PW-300ER_MCDU Progress.jpg
 
One such area is the option of using "ECON" performance. this data will fly the aircraft at the best "Economy" performance to save fuel and give you the information covering the best Climb (CLB), Cruise (CRU) and Descend (DES) and best flight altitude and speeds, transitional speeds and it is clever stuff.
 
767PW-300ER_MCDU Fuel.jpg767PW-300ER_MCDU Final.jpg
 
Positional reports (even when sitting at the gate!) and Progress data is all at your disposal and is updated right to the conclusion of the flight.
 
767PW-300ER_MCDU Ecom CLB.jpg767PW-300ER_MCDU Ecom Dec.jpg
 
But it is in the real details of the FMC that is excellent, the small things that make this FMC certainly the very best one out there in X-Plane
 
767PW-300ER_Radar Test.jpg767PW-300ER_Radar Operation.jpg
 
Weather and terrain radars are not new, but this version is more adjustable and more powerful than the standard X-Plane version, you can test the unit as well to see if it is active and adjust the beam up or down to to get the best perspective that you require more on them later.
 
Menus
 
767PW-300ER_Menu iPad 1.jpg767PW-300ER_Menu iPad General.jpg
 
Another FlightFactor aircraft and another different Menu design. But this is a better version than the X-Plane menu bar approach of the B757, as this B767 version is based around the iPad or Electronic Flight Bag as many are called.
You select the iPad by the smaller version in a pocket on the left of the Captain's position, and it pops up on the top right of your screen, X-Plane menu and key access (recommended) can also be used. The iPad can be moved around the screen but be careful as it can disconnect you from the cockpit controls unless when moved you re-click on the cockpit area background.
 
The iPad has seven different tabs in : General - Ground - Airplane - Failures - Avionics - About and PA (Passenger Announcements)
 
Main tab is "General". This tab selects all the general settings of the aircraft to select more realism or just general flying details. Items you can selects are:
  • High challenge – sets the frequency of custom failures (none, low, high)
  • Real limits – set the structural limits of the aircraft
  • Real time – set the time periods needed for some physical processes f/o in control – the pilots default position is the right seat
  • Throttles block – sets the special throttle block option
  • Advanced windshear – sets the windshear simulation so it can appear in specific weather conditions
  • Mouse wheel – alternates between 4 modes of mouse wheel usage (zoom, rotate, click-rotate, click-rotate-click)
  • Interflight data – sets the option to remember data between different flights (e.g. oil qty, oxygen qty and others)
  • Charts on – turns on the chart on yoke option (read bellow)
  • Hide yokes – hides the yokes
  • Realistic sound – sets the volumes of in-cockpit systems to realistic levels (instead of a mode familiar sim levels)
  • Real weather radar – alternates between a familiar full square radar and a realistic tilt-level based system

All settings and preferences can be saved, which is a huge bonus when resetting up for a new flight. Main aircraft volume can also be adjusted here as well.

Second tab is "Ground". Ground is split into two areas upper for external operations and lower for aircraft weight and balance management.

 

767PW-300ER_Menu iPad 2.jpg767PW-300ER_Menu Ground 3 load.jpg

 

This is a very comprehensive tab, with a lot of settings and configurations. You have a lot of ground support vehicles, stairs, buses, fuel truck, de-ice truck, Air Start Unit (ASU), Loader (LSU) and gate configuration to park at a airbridge.

 

767PW-300ER_Menu Ground 1.jpg767PW-300ER_Menu Ground 2.jpg

 

On early FlightFactor aircraft these ground vehicles were really good, but now they are really feeling their age. They actually now look odd at western airports as they seem more eastern European in design, X-Plane has moved on with more current designs and the de-ice truck looks a little hokey... You can save and recall your favorite support vehicles configuration.   Push back is built in here and we will get to that in a moment. Ground "Maintenance" is needed to reset the interflight data – oxygen and hydralic fluid quantities, starter usage counters etc. To make it easier the (very) top of the overhead panel there is a special flight counter which tells you how many flight have passed from the last maintenance.
 
The lower panel is a very comprehensive way to set up the aircraft. You can set up your "passenger load", "Cargo" and "Fuel Weight". and you get the final weight and balance numbers to reflect your choices. CoG (Centre of Gravity) can be set automatically, but I found it to biased to the rear and making the aircraft nose light? The fuel truck has to connected to load in fuel, but when ready if you push the "LOAD/UNLOAD" button the aircraft will load up to your preferences. This can take a little time and with a lot of noise going on behind you, but it is very authentic. If you want to just change the cargo and passenger loads you can just do that by pressing the "RETOUCH LOAD" button.
 
But there was one slightly annoying thing with this arrangement. And that if you are not resetting the aircraft from "cold" then you have to "UNLOAD" everything in passengers and cargo (or wait ten minutes) before you can then load up your new flight preferences and wait another ten minutes while everything is reloaded that is all going on board, meanwhile you can't finish programming the MCDU/FMC data because the final weights are not yet completed? It is I'll go and get a cup of coffee time while you are doing all this unloading and reloading business. In normal arrival and departing conditions it is fine, but in starting a new simulation it is a bit of a waiting game...  All custom weights and balances preferences can be saved and recalled. But it is a very powerful setup system, and better than past FF aircraft arrangements.
 
Next menu tab is the "Airplane" menu
 
767PW-300ER_Menu iPad Airplane.jpg
 
This menu selects the aircraft items. On the left is the option of the movable cabin window blinds we mentioned and the option of standard wing tips or the newer winglets...
 
767PW-300ER_winglets 3.jpg767PW-300ER_winglets 4.jpg
767PW-300ER_winglets 1.jpg767PW-300ER_winglets 2.jpg
 
Either choice is great, and the detail on the non-winglet version is still to a high quality.
 
Three menu selections covers the "Wingflex" and this does not need to be set very high as it will be a little to flexible, only a small amount on the left is recommended, "Reflections" again you don't need a lot of glossy reflections as it looks odd with a sheen across your screen that looks unnatural at mid to high settings. "Effects" can be set low as well. All settings can be saved and are configured the same the next time you load up the aircraft. 
 
767PW-300ER_Menu iPad Airplane 2.jpg767PW-300ER_Menu iPad Airplane 3.jpg
 
Lower panel is the aircraft doors. spot click all passenger and cargo doors including that small lower cargo hold for oversized and last minute baggage. This Boeing 767 has a great upward sliding door animation that is extremely authentic. small great touchs that make this aircraft really great.
 
Next tab is "Failures".
 
767PW-300ER_Menu iPad Failures main.jpg767PW-300ER_Menu iPad Failures.jpg
 
As you use the aircraft it will start to produce failures that have to be rectified via the "Maintenance" selection...  I didn't clock up enough brownie points to set this in motion...
 
Next is "Avionics"
 
767PW-300ER_Menu iPad Avionics.jpg
 
Another big tab of settings, but at this point the dark ones noted here are not yet functional.  EADI options include (PFD), EHSI (ND) and EICAS displays options. 

EADI

  • Airspeed tape – this will set the airspeed tape in the EADI (PFD)
  • FMA on Top – this will set the FMA on TOP for the airspeed tape. This options is hard connected to the airspeed tape options
  • Integrated cue FD – this will alternate between the integrated cue flight director and the crosshair FD
  • Advanced radio altitude alerts – this set the advanced RA alerts
  • Round Dial RA – this set the round dial RA
  • ILS deviation warning – this sets the ILS deviation warning
  • Rising runway – this sets the rising runway option
  • Trend vector – this sets the trend vector option on the airspeed tape (requires the airspeed tape option to operate)

EHSI

  • Modern EFIS panel – sets the EFIS panel type (with or without TERR and some other options). Automatically set the EGPWS type
  • Heading up map – enables the heading up map
  • TAS and GS – sets the true airspeed and ground speed readouts
  • ADF pointers – sets the ADF pointers
  • Range arcs – enabled the range arcs
  • Digital wing bearing – enables the wing bearing indicator

EICAS

  • FF display – enabled the fuel flow readouts
  • APU oil qty display – enables the APU oil quantity readout
  • Hydraulic pressure – enables the hydraulic press readouts
  • APU RPM – enables the APU RPM readout
  • BULK temperature – enables the bulk cargo compartment temperature readout Brake temperature – enables the bake temperature readout and warning boxes
  • Tire pressure – enables the tire pressure indication

PIP FMS

This setting will alternate between the classical style FMS and the newer PIP type. See the FCOM for more detail EGPWS – this will alternate between the old style enhanced GPWS system which generates the warning text and has only the standard look-ahead display and a newer system which also has the peaks mode.

 

Lots of detail and settings available, you can see why you need time on the airframe to get the best settings configured to your own perspective.
 
In the "About" tab everyone takes a well earned bow, it take a lot of talented people to create a modern X-Plane aircraft in today's highly detailed simulation world...  This is were your money goes.
 
767PW-300ER_About.jpg
 
The last tab is the "PA" (Passenger Announcements)
 
767PW-300ER_PA 2.jpg767PW-300ER_Menu iPad PA.jpg
 
Released on the FF Boeing 757 series, these are quality (meaning very long) announcements, which are great to use and use them a lot I do. Just watch you are not disconnected to the aircraft when you select the tab, and you can kill an announcement or change the announcement volume by the knob on the radio panel.
 
Checklists and Tutorial
 
767PW-300ER_CList 1.jpg767PW-300ER_CList 2.jpg
767PW-300ER_CList 3.jpg767PW-300ER_CList 4.jpg
 
The Checklist and Tutorial menus are not on the iPad, but still like the system on the B757 which is on the X-Plane/plugin menu bar. But nothing is missing here and very good they are. You get a full startup and flight checklists that turn green when items are completed, and auto start functions are here as well and a complete reset page to clear the checklists for a new flight...  four tabs represent: Normal - Procedures - Operational - Resets.
 
Flying the FlightFactor - SteptoSky Boeing 767-300ER
 
You would think that starting up a huge airliner would be a long procedural business, in fact it is quite the opposite.
 
767PW-300ER_Startup 4.jpg767PW-300ER_Startup 1.jpg
 
Warning beacons on (red), main fuel pumps on, Cabin Air-Conditioning off (for engine bleed) and to note I am using the ground start air-compressor not the on board APU. Then select Ground (GND) start and finally the "Engine Start" switch to either 1 or 2, I need at least one engine running to take over from the GPU external power.
 
767PW-300ER_Startup 2.jpg767PW-300ER_Startup 3.jpg
 
The centre MFD panel "Engine Indication and Crew Alerting System" (EICAS) will come alive on the start up engine, let N2 build to 25% and then flip in the "Fuel Control" (flow) switch and the engine will then complete the startup process to idle. When both engines are running then clean up the bleed/Air-Con and turn on the aircraft's engine power supply (DC) and disconnect the external GPU and High-Pressure Units. Startup sounds are extremely good and APU and air-conditioning sounds are constant in the aircraft, and it is weird when you finally shut down the aircraft later on how quiet or noisy it actually is.
 
The pushback truck is built in and a very good one it is...
 
767PW-300ER_Pushback 1.jpg767PW-300ER_Pushback 2.jpg
767PW-300ER_Pushback 3.jpg767PW-300ER_Pushback 4.jpg
 
Select push or pull and let off the brakes to move. You have full throttle and yaw control if you use the keys or a joystick and throttle system, so placing the aircraft correctly for departure is easy. Only slight visual issue is the truck does not fully turn on the front gear, so the aircraft tends to drag the truck sideways? But the turning wheels on the PB truck are a nice touch.
 
YBBN - YPAD
 
767PW-300ER_Taxi 1.jpg767PW-300ER_Taxi 2.jpg
 
On the taxiways the aircraft is nice to manoeuvre around but watch that length it is a big aircraft on tight taxiways and hard turns, however the perfect taxi speed is easily found...  anyway you are to busy enjoying the "PA" announcements to the passengers.
 
767PW-300ER_Takeoff YBBN 1.jpg767PW-300ER_Takeoff YBBN 2.jpg
767PW-300ER_Takeoff YBBN 3.jpg767PW-300ER_Takeoff YBBN 7.jpg
 
ATC clearance and 15º flap selected and your rolling by pressing the THR (Thrust button), on rotate Flaps up a notch and gear up, switching to SPD and Autopilot (AP) on and LNAV/VNAV are selected. The aircraft has plenty of power and I have a high takeoff weight, so climbing above 2000fpm is not a problem for this aircraft.
 
767PW-300ER_Taxi thrust.jpg767PW-300ER_Takeoff YBBN 5.jpg
 
Your friend is the "Thrust Mode Management" panel in setting TO/GA, CLB, CON, CRZ and DERATE 1 & 2. If you programmed the MCDU correctly the Thrust Management will control your engines for the maximum performance and you certainly do feel the differences.
 
767PW-300ER_Takeoff YBBN 4.jpg767PW-300ER_Takeoff YBBN 6.jpg
767PW-300ER_Flying 5.jpg767PW-300ER_Flying 6.jpg
767PW-300ER_Flying 1.jpg767PW-300ER_Flying 2.jpg
 
The sheer amount of information in route data and engine data available to you is extraordinary. PROGRESS page gives you perfect updates on the route and DIRECT TO is available when required. Finally at cruise you can breath out and relax.
 
One major thing that you feel is the absolute complete environment of this Boeing 767-300ER. The way you look through those lovely port-holed windows but mostly via the aural connection of the aircraft. I have flown on many aircraft and on the B767 many times and this aircraft is the one that really captures that feeling and the very sounds like the real aircraft... it sends goosebumps up your spine in the reality of it all. I have not been a big fan of FF external sounds (very clicky), but with the "realistic sounds" option on they are a lot better here. but internally they are excellent. Only slight annoyance is still that FF cabin communication "pinging" that you can't seem to keep happy.
 
767PW-300ER_Flying 7.jpg767PW-300ER_Takeoff YBBN 8.jpg
767PW-300ER_Flying 3.jpg767PW-300ER_Flying 4.jpg
 
So is the FF B767 different from the FFB757? From the cockpit yes it does even though the panel layout is the same, and it is a very different aircraft in many respects, more depth and the FF B757 was very good there. The B757 feels darker and far older than the brighter surrounds of the lovely B767 cockpit.
 
767PW-300ER_Flying 8.jpg767PW-300ER_Flying 9.jpg
767PW-300ER_Flying 10.jpg767PW-300ER_Flying 11.jpg
 
It is 2h 30min flightime between BNE to ADL, but it felt longer with the "real time" option on, and yet the clock is right.
 
767PW-300ER_YPAD 1.jpg767PW-300ER_YPAD 2.jpg
 
Pretty soon you are coming over the Adelaide Hill's on the "Black" STAR approach path to RWY 23. FF created the best aircraft noises and this B767 does not disappoint on landing, throttle changes are excellent and wind noise with gear extraction is amazingly realistic, almost distractingly so, you are working hard on the pre-landing procedures and these great sounds are surrounding you with detail... realism par excellence.
 
767PW-300ER_YPAD 3.jpg767PW-300ER_YPAD 4.jpg
767PW-300ER_YPAD 5.jpg767PW-300ER_YPAD 6.jpg
 
You are working hard but the aircraft delivers, one natural thing is that the Boeing 767-300ER is just a very nice aircraft to fly, perfectly balanced and you love being at the controls...
 
767PW-300ER_YPAD 7.jpg767PW-300ER_YPAD 8.jpg
 

Landing sounds are exceptional, thrust reverse can be set up so your add-on throttle will allow you to control the amount of thrust you need to stop, but pull the thrust back and close the doors before rubbing off to much speed as you will lose too much momentum as the reset period to forward thrust is quite high, if you want a bit more realism I recommend SimCoders free "HeadShake", but use it sparingly and at minimum settings.

767PW-300ER_YPAD 9.jpg767PW-300ER_YPAD 10.jpg

 

Back on the ground and you clean the aircraft up and say goodbye to the passengers, the B767 has such a great visual impact in X-Plane, just a damn nice aircraft.

 

767PW-300ER_YPAD 11.jpg767PW-300ER_YPAD 17.jpg

 

At Gate 14L the unloading of the aircraft works for me, but while the noise is going on behind me the reloading was now starting to start and I am working hard to finish off the reprogramming the MCDU for the next sector to SYD (Sydney), a top up with fuel is also needed but turnaround time is 45 minutes and you have a lot of work to get through... 

 

YPAD - YSSY

Departure from YPAD is via RWY 23 and this is a great opportunity to test out the terrain radar which is a major feature and independent of the standard X-Plane version. The system notes the high ground to the left of the aircraft, and the radar in the nose is adjustable up or down to give you the feedback you want, the sweep of the radar beam on the CRT is really well done and is highly realistic.

 

767PW-300ER_YPAD 12.jpg767PW-300ER_YPAD 13.jpg

 

There is one notable aspect in that the PFD instrument has no Altitude or V/S tape, there is the speed tape but you are looking to use the standard clockwork dials for the Altitude and V/S information. This EHSI (Electrical Horizontal Situation Indicator) is a little disconcerting at first as you are so used to having both items fore and centre, but you do get used to it and it makes the display less busy to use, there is still a wealth of data and information in there and the Localizer deviation scale and pointer (Horizontal) and Glideslope deviation scale and pointer (vertical) still appear on landing. Pitch, and Rate of Roll displays are excellent as is the Flight Director cues.

 

767PW-300ER_YPAD 14.jpg767PW-300ER_YPAD 15.jpg

 

Lower MAP/NAV screen is highly configurable from the EFIS (electronic Flight Instrument System) panels and have all modes including VOR, APP (Approach),MAP and PLAN, switchable to the ROSE mode for heading flying. The display will also show the above Terrain/Weather displays.

 

Weather

On the face of the displays the Weather radar looks like the current default X-Plane version, but it is not. This weather radar is a totally new thing in X-Plane all together. It creates extrapolated 3D weather data and shows cross-sections using tilt and gain. Also shows windshear and turbulence visual data. It is controlled by "weather Radar" panel on the pedestal and this negative and positive look down feature into the weather is excellent.

 

767PW-300ER_Weather 5.jpg767PW-300ER_Weather.jpg

767PW-300ER_Weather 1.jpg767PW-300ER_Weather 2.jpg

 

Rain and wind effects are very good, the raindrops drip realistically down the window and then go horizontal as the speed grows, the wipers will clear away the drops and only have them reappear as the wiper moves past and returns. Combined with the radar you get a great all round poor weather conditions till you break through the cloud ceiling and altitude.

 

767PW-300ER_Weather 4.jpg767PW-300ER_Weather 6.jpg

767PW-300ER_YPAD 16.jpg767PW-300ER_YPAD 18.jpg

 

Route information to YSSY is again top notch. Note the T/D (Top of Descent) point which I found exactly spot on for my descent speed of -2000fpm.

 

767PW-300ER_YSSY 2.jpg767PW-300ER_YSSY 1.jpg

767PW-300ER_YSSY 3.jpg767PW-300ER_YSSY 4.jpg

 

One sector to go at YSSY back to BNE and it was another offload... reload and re-programming the MCDU and weights and balances for the lighter load and shorter distance flight back to Queensland.

 

YSSY - YBBN

 

767PW-300ER_YSSY-YBBN 2.jpg767PW-300ER_YSSY-YBBN 3.jpg

767PW-300ER_YSSY-YBBN 4.jpg767PW-300ER_YSSY-YBBN 1.jpg

 

Enroute you can can access pages within pages of data. Helpful is "Wind Forecasts" for different wind altitudes, and that wind data is also translated to the flight PROGRESS (page 2) data. Aircraft cruise (CRZ) ECOM data (page 2) is also available. So you can see that the correct programming of the MCDU is critical in many areas of flight for performance and visual data, this is one very intelligent aircraft. that flies to very specific inputs and weights and balances.

 

767PW-300ER_YSSY-YBBN 5.jpg767PW-300ER_YSSY-YBBN 6.jpg

767PW-300ER_YSSY-YBBN 7.jpg767PW-300ER_YSSY-YBBN 8.jpg

 

We are almost around the triangle and landing back in Brisbane is only a 20min away, and as the light is falling, let us look at the aircraft's lighting.

 

Lighting

 

767PW-300ER_Lighting 1.jpg767PW-300ER_Lighting 2.jpg

767PW-300ER_Lighting 3.jpg767PW-300ER_Lighting 4.jpg

 

FlightFactor was one of the pioneers of great internal aircraft lighting and the Boeing 767 here is very good. The only odd visual note is that the panel is more yellowish than the AP panel. It does give it a different visual look and you can certainly find that right point for having limited reflections for takeoff and landing in the dark in four different lighting adjustment knobs. On saying that if you turn up the lighting inside the cockpit the window reflections are excellent and highly realistic.

 

767PW-300ER_Lighting 5.jpg767PW-300ER_Lighting 6.jpg

 

Overhead in two forward spot (chart lights) and two rear main (Storm) lighting fills the cabin with great working light in flight or setting up on the ground. Power overhead (OVHD) lighting gives you full cockpit illumination.

 

767PW-300ER_Lighting 7.jpg767PW-300ER_Lighting 8.jpg

 

Rear Cabin is brightly lit and very realistic, feels very good and adjustable too.

 

767PW-300ER_Lighting 10.jpg767PW-300ER_Lighting 11.jpg

 

External lighting is slightly compromised by Laminar Research's blobby v10.45 lighting, but with HDR on you have a lot of different lighting tools at your disposal.

 

767PW-300ER_Lighting 12.jpg767PW-300ER_Lighting 13.jpg

 

Night view from the cockpit is amazingly realistic, your in the zone and to deep into your landing procedures to look out of the windows, you work hard in here, but the feedback and realism gives you an adrenaline rush...

 

767PW-300ER_Lighting 14.jpg767PW-300ER_Lighting 15.jpg

 

Finals and the cockpit again fills with the huge noise of rushing winds and gear down lights. 

 

767PW-300ER_Lighting 16.jpg767PW-300ER_Lighting 17.jpg

 

Forward lighting is very good and the runway is well illuminated. 

 

767PW-300ER_Lighting 18.jpg767PW-300ER_Lighting 19.jpg

 

You have three sets of turnoff lighting and with the main, taxi and turnoff lights running you light up the whole area around the cockpit...

 

767PW-300ER_Lighting 20.jpg767PW-300ER_Lighting 21.jpg

 

The view for taxiing is excellent and the lighting is powerful in selecting the right line around tight taxiway turns.

 

767PW-300ER_Lighting 25.jpg767PW-300ER_Lighting 22.jpg

 

There is excellent wing/Ice lighting, but a strange deal on the tail logo light. There is a logo button, but the tail lights don't work? Then on the ground turn on the wing lighting and it comes on, turn off the wing lighting and the logo stays on?  weird? It is not centre either on the logo...

 

 767PW-300ER_Lighting 23.jpg767PW-300ER_Lighting 24.jpg

 

Three sectors and four ports and it is a big day flying, no doubt the Boeing 767-300ER is one challenging but hugely rewarding aircraft.

 

Liveries

You get (noted as "Free") liveries, including: American Airlines, Air France, Garuda Indonesia, British Airways, Star Alliance Lufthansa (a strange choice) and Canadian Westjet.

767PW-300ER_Livery AA.jpg767PW-300ER_Livery AF.jpg

767PW-300ER_Livery GA.jpg767PW-300ER_Livery BA.jpg

767PW-300ER_Livery LH.jpg767PW-300ER_Livery WJ.jpg

 

There are also nine livery packs available at $US10.00 per pack, noted are: Asia 1 & Asia 2, Europe 1, Europe 2 & Europe 3, Middle East, North American, Oceania and South America, that is altogether over 100 + liveries for the aircraft...

 

Summary

The basic conclusion to this Boeing 767-300ER Professional is that in every way and every department it is a step forward in X-Plane simulation. Three areas stand out though, the sheer depth and complexity of the aircraft and its systems, it is certainly another level again and the amount of data you have at your disposal is breathtaking. The aircraft's design quality and the weather (Radar and Terrain), over gloss and chrome features are other stand out features.

 

Third is with all this huge amount of detail, design and the sheer amount of code that must be in the aircraft and yet....  yet it is so frame-rate friendly, so light on your computer, that alone is a significant amount of genius.

 

Negatives...  minor but there are a few niggles, It takes a long time to set up for flight, there is a lot of inputting and detailed areas to cover, so it is not a jump in and fly aircraft by any standards, but creating routes and saving them can really help in reprogramming the MCDU, but your work is certainly cut out in there. The ground vehicles are looking a bit out of date and wrong in a modern airport context, a bit 60's Eastern Bloc. That cabin crew constant communication "pinging" drives you mental, yes you are required to satisfy its needs but a lot of "pinging" 500ft out from landing it is more like "just shut up and sit down"

 

The biggest point to make is that many uses will note that the Boeing 757 has everything the Boeing 767 has and certainly why bother as the cockpit is the same anyway. That is like saying here that my brother or sister is the same as me because they come from the same parents. They are totally different aircraft, and in fact the familiarity is actually a bonus as you don't need to relearn that side of procedural process, but in every other way, in feel, in use and certainly in the depth of the simulation they are quite different aircraft, and you will fly them for different reasons.

Overall it is the feeling that no aircraft comes closer to the real aircraft in feel and sounds than this one does, start it up and fly, and your memories come flooding back of being on the real machine, up there high...  yes it is that realistic.

 

The best heavy aircraft in simulation in X-Plane, well that is a big call for this excellent Boeing 767-300ER, but certainly it again raises the standards to another level again in every area, it is not in the first look that it really delivers but in the minute detailing of systems and programming and flight performance, in that area it is simply outstanding.

 

______________________________________________________________________

 

logo logo sm.jpg

 

Yes! the Boeing 767-300ER Professional by VMAX and FlightFactor is NOW! Available from the new X-Plane.Org Store here :

 

Boeing 767-300ER Professional

Price is US$64.95

Features

Flexible Options

  • A very flexible architecture : You chose the set up
  • Different options for many avionics instruments including two types of FMC.
  • Options to composite your own EICAS, EADI and EHSI displays.
  • Most of the options included in the real 767

Checklists and 'Autohelper'

  • Full electronic interactive checklist with automatic action detection.
  • Automatic mode 'Helper'  who performs all the actions for you, you just CHECK the items.
  • A tutorial which shows the user what to do and when.

Perfected Flight model

  • Accurate flight model, as close as it gets to real performance. Tested by real pilots and translated to X-Plane
  • A dynamic and customizable center of gravity that depends on actual cargo and passenger load

Fully Functional Professional FMS and EFIS System

  • Custom Flight Management Computer, integrated with other plane systems.
  • Custom programmed LNAV logic for terminal procedures from updatable database.
  • VNAV-managed climbs and descends.
  • Optimum cruise performance and step climb calculation.
  • Two independent analogue instrument sets for captain and first officer.
  • Two independently simulated EFIS (EADI/EHSI configuration) for captain and first officer.
  • Dual-FMS with two independently working CDUs.
  • Working instrument comparators.
  • Triple IRS and triple symbol generator systems with realistic instrument source switching.
  • Dual air-data computers with custom failure modes and source switching.
  • Independent 2 nav and an ils recievers.
  • Realistic inertial, radio and GPS position updating, you can see the individual inaccuracies of those systems.
  • Triple-channel autopilot with realistic dependencies.
  • Fail operational and fail passive auto land with mode degradations based on system failures.
  • Load company routes generated by Professional FlightPlanner X (or other compatible programs) directly into the FMC.
  • FMC can be used on external touchscreen or tablet, optimized for the Retina iPad.

Custom Systems and Failure model

  • Detailed and deep simulation of almost every system in the real aircraft.
  • Custom air and pressure system.
  • Electrical system with all AC and DC busses modeled - see which system depends on which bus.
  • Hydraulic system that uses a little fluid when treated correctly and a lot of fluid if used incorrectly.
  • Multistage custom failure system - over 200 more failures than X-Plane.
  • Ability to fix failure by following proper procedure.
  • Persistent failure and maintenance system. Aircraft wear and misuse will carry over to your next flight.

Warning system and radars

  • Fully functional GPWS with all the modes the real plane has.
  • Fully functional terrain radar, with custom database (just like the real plane), a look-ahead warning system and many other features.
  • Weather radar that works like the real thing. Including tilt and gain functions, ground clutter, turbulence detection and windshear prediction.

3D Modeling

  • Accurate dimensions based on exterior drawings provided by Boeing.
  • Very detailed exterior modelling with high resolution textures.
  • Very high resolution 3D cockpit with every switch functional.
  • Spatial rain simulation with high detail.
  • Very detailed passenger cabin graphics including galleys.
  • Additional graphic features: real working oxygen masks both in cockpit and cabin, dynamic window blinds that react to sunlight etc.
  • New and improved wingflex.

Special effects

  • Multilayer dynamic reflections on all glass objects.
  • Reflective metal and plastic objects in the cockpit.
  • Glossy exterior that reflects the outside.
  • XP weather enhancements like custom windshear.

______________________________________________________________________

 

Installation :   Download aircraft file size is 2.27gb - Liveries 426.20mb. Installed file size is 2.6gb

Authorisation key is required, and I highly recommend a desktop startup when Key activation is complete.

Notes: You will need a lot of time to programme the aircraft before actually flying it.

Documents : Both a Official Boeing B767 Operating Manual and FlightFactor aircraft manual and Remote CDU set up guide (iPad).

I also recommend to download this: B767_Flightdeck_and_Avionics guide 14.6mb for a more quicker overview than the extensive official manual.

 

B767_Flightdeck_and_Avionics.pdf

B767 Docs.jpg

 

Requirements :

X-Plane 10.40+ (any edition) running in 64bit mode.
Windows 7+, Mac OS 10.9+ or Linux 14.04 LTS or compatible. 64bit mode
1Gb VRAM Video Card Minimum. 2Gb+ VRAM Recommended. 3Gb+ VRAM Preferred
(Note aircraft is exceptionally good on framerate, playback is current with similar sized aircraft and features)

______________________________________________________________________

 

FlightFactor Developer Support : FlightFactor 767 Professional
 
______________________________________________________________________
 

Review by Stephen Dutton

12th December 2015

Copyright©2015: X-Plane Reviews

 

Review System Specifications:

Computer System:  - 2.66 Ghz Intel Core i5 iMac 27”- 9 Gb 1067 Mhz DDR3 - ATI Radeon HD 6970M 2048 mb- Seagate 512gb SSD 

Software:   - Mac OS Yosemite 10.10.4 - X-Plane 10 Global ver 10.42 (final)

Addons - Saitek x52 Pro system Joystick and Throttle : Sound - Bose  Soundlink Mini : Headshake

Scenery or Aircraft

- YBBN - Brisbane International by tdg  (YBBN - Brisbane Airport 1.0 - X-Plane.OrgStore) - Free

- YPAD - Adelaide International by Chris K (ISDG)  (YPAD Adelaide Airport Photo Scenery 1.31 - X-Plane.OrgStore) - Free

- Adelaide City Scenery by Chris K (YPPF Parafield Airport and Adelaide City Photoreal) - Free

 

Logo Header X-PlaneReviews 200px.jpg

 

Link to comment
Share on other sites

9 minutes ago, Guest said:

Hi, Great review! Just wondering where you got the Jetstar A320 static aircraft from?

Thanks,

Patrick

I made the JQ and VA liveries myself as there isn't any, sorry I can't share because of copyright on the objects...  SD

Link to comment
Share on other sites

20 hours ago, judeb said:

Stonking great review,Stephen.I'll hold of till the new year for this one,as I'm waiting for the ahem - IXEG-  to surface,rest assured,I will get this baby at some stage.

Jude

 

You should be getting the 767 Jude. ixeg team made of list of missing features in 737 http://www.avsim.su/forum/topic/117688-разработка-boeing-737-classic-компанией-ixeg-international-x-plane-e/?p=3065270 and it is very disappointing

I got the 767 and it is awesome, superior to anything else out there

 

Link to comment
Share on other sites

Hi

I have a question about the Weather radar.

I see in your review that there is a pop up windows that shows the artificial  horizon and the weather radar together.

566b90a3cee76_767PW-300ER_Weather5.thumb

How is possible to have this pop up windows ?

Where I have to click ?

Luigi

 

There is no popup...  These images are to show the high detail of the displays...  SD

Link to comment
Share on other sites

8 hours ago, Guest said:

Hi all,

Only PW4000 engines installed. I'm missing CF6 or RB211 and no weight option for Kg.

Regards.

Jovabra

If you have purchased FlightFactor aircraft before, you would know that in their updates they are usually (paid) Engine updates and Cargo versions.  SD

Link to comment
Share on other sites

  • 3 months later...

Great review. Only qualm with the aircraft (not you) is that the American 767s do not say "American Airlines" on the side - they say "American." Would have expected more from a company putting out a payware aircraft.

Link to comment
Share on other sites

  • 2 months later...
Guest Speedbird

"Most of the options included in the real 767" This is not true. The real 767 has a LOT more options then the ones included. For example, in real life, the digital mcp shown on this 767 is quite rare, most 767s have a 747 style mcp. Another glaring missing feature is the lack of options for the doors. In real life, quite a lot of 767 operators did not choose the overwing exits. Of course, lets not forget the missing GE and RR engines, but FF have said that those will come later.  Many other things are inaccurate or missing. For example, the standby attitude indicator is colored wrong, brown and blue instead of black and blue. Another very big error, is the rotating beacon light. In real life, 767s have a flashing beacon, not a rotating beacon. A very minor but annoying thing, is the fact that the FMC does not have an option for cost index 0. According to Boeing documents, this should be possible. http://www.boeing.com/commercial/aeromagazine/articles/qtr_2_07/AERO_Q207_article5.pdf Finally, the quality of the livery's is very poor for a 64$ aircraft. Don't get me wrong, this is a great aircraft, and most of the errors are quite minor, but when someone is charging me 64$s for a simulated aircraft (remember, that's only 5 dollars less then the NGX, which I am sure we can all agree is the epitome of flight simulation) and not even bothering to look at a picture of a real American Airlines 767 to confirm that they did it right, you know something is off.

Link to comment
Share on other sites

8 hours ago, Guest Speedbird said:

"Most of the options included in the real 767" This is not true. The real 767 has a LOT more options then the ones included. For example, in real life, the digital mcp shown on this 767 is quite rare, most 767s have a 747 style mcp. Another glaring missing feature is the lack of options for the doors. In real life, quite a lot of 767 operators did not choose the overwing exits. Of course, lets not forget the missing GE and RR engines, but FF have said that those will come later.  Many other things are inaccurate or missing. For example, the standby attitude indicator is colored wrong, brown and blue instead of black and blue. Another very big error, is the rotating beacon light. In real life, 767s have a flashing beacon, not a rotating beacon. A very minor but annoying thing, is the fact that the FMC does not have an option for cost index 0. According to Boeing documents, this should be possible. http://www.boeing.com/commercial/aeromagazine/articles/qtr_2_07/AERO_Q207_article5.pdf Finally, the quality of the livery's is very poor for a 64$ aircraft. Don't get me wrong, this is a great aircraft, and most of the errors are quite minor, but when someone is charging me 64$s for a simulated aircraft (remember, that's only 5 dollars less then the NGX, which I am sure we can all agree is the epitome of flight simulation) and not even bothering to look at a picture of a real American Airlines 767 to confirm that they did it right, you know something is off.

 

I really think you are nitpicking here. We look at the aircraft in an X-Plane context in noting what you get in detail and features. All airlines have their own specific items or even versions to meet their own fleet service needs and with over a 1000 aircraft built there is no way you can cover all the differences in details over all the differences of aircraft, like a American Airlines variant is not going to be like a Delta one is it. Early produced aircraft are going to different than a later version and so on, so developers usually go down the middle. On going updates usually cover those small items and FlightFactor has always produced extra engine variants, so I would guess they would be due soon. SD

Link to comment
Share on other sites

Guest Speedbird 48

Its not nitpicking. Its kind of false advertising. And I don't think putting a rotating beacon on a plane from the 80s is small. And certainly the inaccurate standby IFSD and specially the AAL livery are not small! Of course, I am going to buy it anyway. There's just something compelling about it.

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...
4 hours ago, Bulldogtrs326 said:

Hi Stephen, thanks for the review.  Are there any tutorials on how to perform a shutdown and restart for a turnaround?  I usually have to shutdown and restart Xplane all together.  

 

I think the thing you are looking for here is reset, and not restart...  In reality you don't completely shut down an aircraft at the gate, but reconfigure it for the next flight, usually the FMS has completed its last operation and by reentering the new route you should reset it, the only issue in X-Plane is moving the aircraft to another position (airport) which does not happen in real life, then you would certainly require a restart. But X-Plane11 has an interesting option that allows you to carry on from where you left off last time you shutdown the simulator, but otherwise you just set the aircraft up for the next flight as you did the first one.... SD

Link to comment
Share on other sites

On December 4, 2016 at 5:56 AM, Stephen said:

 

I think the thing you are looking for here is reset, and not restart...  In reality you don't completely shut down an aircraft at the gate, but reconfigure it for the next flight, usually the FMS has completed its last operation and by reentering the new route you should reset it, the only issue in X-Plane is moving the aircraft to another position (airport) which does not happen in real life, then you would certainly require a restart. But X-Plane11 has an interesting option that allows you to carry on from where you left off last time you shutdown the simulator, but otherwise you just set the aircraft up for the next flight as you did the first one.... SD

Well, what I'm really wanting to know is what systems do you have to shutdown for the reset.  If I land and park and then want to reload and take off again.  I know you have to shutdown the engines because you can't unload or load the plane while the engines are running.  I'm just not certain what else you have to do.  And I've tried hitting the new flight button in XACARS but that always shuts the whole game down.  I really need some advice lol.

Link to comment
Share on other sites

1 hour ago, Bulldogtrs326 said:

Well, what I'm really wanting to know is what systems do you have to shutdown for the reset.  If I land and park and then want to reload and take off again.  I know you have to shutdown the engines because you can't unload or load the plane while the engines are running.  I'm just not certain what else you have to do.  And I've tried hitting the new flight button in XACARS but that always shuts the whole game down.  I really need some advice lol.

 

I think you are missing the point...  when you park an aircraft you shutdown the engines and connect up to an external power source (GPU or on board APU) then you shut down the systems on the aircraft that are not needed, say the fuel pumps, and other aux items, which most are listed in checklists, which the Boeing 767 has built in (menu) Go to the tab  "Procedures" then "Shutdown" and the full list of items are listed there. If you want the shortcut then use the "Auto" function to do the checklist for you, but it is better to do them yourself so you learn what is what on the aircraft's systems... SD

Link to comment
Share on other sites

7 hours ago, Stephen said:
On December 12, 2015 at 4:00 AM, Stephen said:

 

I think you are missing the point...  when you park an aircraft you shutdown the engines and connect up to an external power source (GPU or on board APU) then you shut down the systems on the aircraft that are not needed, say the fuel pumps, and other aux items, which most are listed in checklists, which the Boeing 767 has built in (menu) Go to the tab  "Procedures" then "Shutdown" and the full list of items are listed there. If you want the shortcut then use the "Auto" function to do the checklist for you, but it is better to do them yourself so you learn what is what on the aircraft's systems... SD

I may just not be wording it correctly lol.  What I'm wanting to know is what systems have to keep running during reload.  I want to do turnaround flights without having to shut down XPlane.  

 

At Gate 14L the unloading of the aircraft works for me, but while the noise is going on behind me the reloading was now starting to start and I am working hard to finish off the reprogramming the MCDU for the next sector to SYD (Sydney), a top up with fuel is also needed but turnaround time is 45 minutes and you have a lot of work to get through... 

 

What is the 45 minute procedure?

Link to comment
Share on other sites

  • 3 weeks later...
8 hours ago, chrisrob57 said:

fmc out of date   i have navigraph     and added 767 to it  updated, but still says out of date  x plane 11     windows 7 64 bit  how to fix

 

Have got the X-Plane11 version of the Boeing 767?  no you haven't because it is not out yet?  obvious!  SD

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...