-
Brussels V2, orthographic textures, need to be colour corrected and should have been, it is not difficult to do. There are approximately 35 titles to correct which I did in photoshop. About 4 layers which include, colour balance (shift away from red), desaturate (about 20), slight increase in exposure. The only thing they did from version 1 was to increase exposure which was severely underexposed by about 1 stop and that's all.
-
Globall Art / CYUL - Montreal International Airport
https://store.x-plane.org/CYUL--Montreal-International-Airport_p_892.html
Montréal–Pierre Elliott Trudeau International Airport (IATA: YUL, ICAO: CYUL) (French: Aéroport international Pierre-Elliott-Trudeau de Montréal) or Montréal–Trudeau, formerly known as Montréal–Dorval International Airport (Aéroport international Montréal-Dorval), is an international airport serving Montreal, Quebec, Canada, located on the Island of Montreal, 20 km (12 mi) from Downtown Montreal. The airport terminals are located entirely in the suburb of Dorval, while one runway is located in the Montreal borough of Saint-Laurent.Trudeau is the busiest airport in the province of Quebec and the third-busiest airport in Canada by both passenger traffic and aircraft movements, with 18.16 million passengers and 235,099 movements in 2017. It is one of eight Canadian airports with United States border preclearance and is one of the main gateways into Canada with 11.2 million or 62% of its passengers being on non-domestic flights, the highest proportion amongst Canada's airports during 2016Scenery features- Accurate replica of CYUL / YUL -Aeroport International Pierre Elliott Trudeau , updated.
- Precise modeling based on original references, photos and other research.
- Customized runways, lines and taxiways, with ambient occlusion included in the textures.
- Sun reflections effects on pavements.
- Fingers Auto Gate with VGDS.
AutoGate Plugin by Marginal
- Static objects, vehicles and aircraft are present in this scenery.
- Avenues and streets with personalized and standard vehicle traffic.
- Custom Airport Mesh and adjacent areas.
- Underground passages created with Mesh Remexe tool
Mesh Remexe Tool – by Joz
- HDR lighting with custom night textures.
- Custom textures with ambient occlusion.
- Custom Approach Lights (ALS) systems.
- Included taxi routes for aircraft, "taxi route"
- Configured to WT3 plugin.
- Configured Ramp Start.
- De-ice system configured for some specific aircraft
Use Auto Gate Datarefs
- Winter texture - only around the Airport area.
Animated Airport- Configured for World Traffic 3
- Animated ground traffic and default aircraft traffic.
Ground Traffic plugin by Marginal
Included in this Package- CA-CYUL-A-Montreal Airport v1.0
- CA-CYUL-B-Montreal Mesh v1.0
- CA-CYUL Winter Textures
- CA-CYUL Montreal Autogen - Link in the manual
- CA-CYUL Montreal Ortophoto HD Zoom 17 - Link in the manual
- Airport Charts - Manual
-
Hi Stephen,
I want to say thank you to you for the amazing review.
Take care guy.
Happy holidays.
Cheers
Cami
-
Hi Stephen,
First and foremost a huge thank you for this amazing and informative web site. As a newcomer to X-Plane I have found this site a very reliable source of information before committing heard-earned cash for add-ons. Then thanks also for electing my DC-3 review as one of your contest winners – wonderful!
Thought I'd follow up, perhaps prematurely, on the Org Store contacting me or, more specifically, not contacting me! Haven't heard a thing, but just checked and see I used a different email address for the x-plane.org, which may explain the silence. Or I am just too impatient ... ;-). I'd be happy to pass along the details, but found that I cannot send a PM to you.
Thanks
-
I really need the X-Plane Evektor EV-55, but i need some changes to go with it.
1) Need at least 9 passenger seats...can be with or without several passengers.
2) Need custom paint job
3) What progress has been made and/or on the logo light on the tail? needs to be placed about half way from the vertical stabilizer on the underside, to create sort of an oval on the vertical stabilizer.
I'll buy as soon as these items are adopted in the Evektor EV-55
-
Greetings from Grand Rapids, Michigan, USA
Stephen...Just purchased the UH60 Blackhawk by BFDG not realizing that it is not compatible with X-plane 11.
Question: Do you have any information as to if / when this product will become X-plane 11 compatible?
Thank you!
Randy
-
Hi Dionsol
Thanks for the feedback, and I totally agree with you on your comments on the G1000, yes it is slow, yes it kills framerate and yes I hate that map rotation... Overall again as you mentioned the Eclipse is just that little better at the moment.
But I will note that the G1000 bugs are not correct as well. There seems that something has gone wrong here as more than a problem with the G1000. It was like this when originally released, but Carenado fixed it, but now it is back to that same position it was a year ago? Personally I think it will be fixed pretty quickly and the aircraft will then be fine, I personally would have stuck with it a bit longer, as it would have been very good in the long run.
I looked at your video, and I don't think it was a poor review... believe me there are far, far worse out there. Thanks for the interest... Stephen
-
Hey Stephen,
I just read your review of the x737 project and noticed you were at YBCG. I don't have any scenery for Gold Coast or Brisbane. Do you have a link to what you're using?
Cheers,
Jase -
Aerosoft Southwest Florida Intl (KRSW) Now Available
Aerosoft Online Shop: http://en.shop.aerosoft.com/eshop.php?action=article_detail&s_supplier_aid=13655&s_design=DEFAULT&shopfilter_category=Flight%20Simulation&s_language=english
Steam Store: http://store.steampowered.com/app/339394/
-
STATUS UPDATE
Hello, and thanks for the support! I am pleased to announce that Aerosoft hopes to release the scenery within a week (on Thursday, to be specific).
I have fixed some bugs and made some improvements to the scenery since my first post. These changes include more than doubling the texture resolution of some airport structures and ground vehicles, and adding weathering to the terminal and surrounding airport buildings.
Some of these changes are slightly visible in the updated screenshots below (click on each screenshot for full quality):
-
This is a game changer.
Hello everyone. After many months of hard work, I am thrilled to unveil Southwest Florida Intl for X-Plane 10. In the screenshots below, catch a glimpse of one of the most detailed and beautiful sceneries ever created for X-Plane. Handling about eight million passengers a year, Southwest Florida Intl is the second busiest single-runway airport in the United States, and the 45th busiest in the United States overall.
Key Features:
- 10 cm/pixel aerial orthoimagery covering the entire airport (approx. 8.41 sq. km)
- 1 cm/pixel custom ground detail/markings
- True-to-life pavement, not repetitive textures
- Never-before-done, hand-placed pavement seams covering the entire airport apron, runway and taxiways
- Baked-in, ray-traced ambient occlusion on all major buildings
- Baked-in, ray-traced night illumination on the airport terminal building
- Specular reflections and all-HDR lighting (no hand-painted lighting)
- Accurate building heights, measured using LIDAR (Light Detection and Ranging) elevation data
- Designed using efficient modelling techniques and X-Plane 10-native methods for maximum performance without compromising on quality
- Animated jet bridges and marshallers at all gates (using the freely available AutoGate plugin by Jonathan Harris)
- Static aircraft as an option
- Animated and static ground vehicles
- Volumetric grass
- Road traffic
- Compatible with HD Mesh Scenery v3 by Andras Fabian
Release Date: This scenery is not really a 'work in progress' any more, it has been completed and submitted to Aerosoft. That being said, a release date is not currently available.
-- Click on each screenshot below to view the full detail of the scenery in gorgeous 1920 x 1080 pixels --
-
I just purchased xp10 and just joined this website. I have been away from simming for a year and I am starting to reengage. Can I use any or all of the addons from FSX such as planes and scenery that I downloaded from other manufactures i.e. Aerosoft, Iris, Lotus or REX in XP-10 and will they fly? Also, on average how long does it take to load XP-10?