NEWS! - Aircraft Update : Airbus A319 XP12 v1.9.1 by Toliss

[Stephen]

NEWS! - Aircraft Update : Airbus A319 XP12 v1.9.1 by Toliss

 

 

It is a single digit update, but there is a lot in here to make a difference. X-PlaneReviews covered the last update (v1.9) of the excellent Airbus A319-112 back in only July 2023...  Aircraft Update Review : ToliSS Airbus A319-112 v1.9 X-Plane 12

 

To a point you could see this update as an extension to the earlier v1.9 release, for one the focus is basically on the same areas as before. These areas are fully the functional circuit breakers, now as high as 214 active C/Bs, as is with the introduction of more failures for the yaw damper, rudder travel limiter, rudder trim, ignition system, fuel valve power supplies. There are more FADEC individual channels, and the FADEC now needs 2-3 seconds to power up to be more authentic. PilotEdge can now also be used as your ATIS source, and ECAM messages now represents the newer FWC standard. There are 25 fixes and bug related changes as well.

 

New features:

- Added new C/Bs brining the total number of functional C/Bs to 214

- New faults: Yaw Damper, Rudder Travel Limiter, Rudder Trim

- FADEC needs 2-3 seconds to power up

- Popout windows now remain visible in external view

- ATIS requests via the Hoppie network can now also query the PilotEdge network

- New failure modes: FADEC faults

- Reordered ECAM messages to represent newer FWC standard

- ACP knobs are now moving up and down

- Added Ignition failures to ECAM. (Use C/Bs to disable ignition)

Bug fixes:

- Improved power transient handling for VHF radios

- Fixed issue with NWS via the in cockpit nose wheel tiller

- Fixed cargo door animation issues.

- Corrected the arrangment of the Taxi and TO lights in the nose landing gear.

- Changed FMA indication to maximum of CAT 2 when A/THR is not engaged.

- Brought TRx INOP status message back on SD Status page.

- Fixed HYD Page PTU color when conditions for PTU to operate are not met.

- Round metric FCU altitude on PFD to 10m

- Improved FAC FAULT ECAM actions

- Added 3s timeout when pressing the status page with status "NORMAL".

- Use FMGS weights for VLS if initialized.

- Reworked behaviour of the FAC cutout switches

- MCDU APPR speed predictions take current weight, when approach phase active.

- PTU should not be able to power circuits without fluid anymore

- with dual RA fault, LG not down warning should trigger with flaps 3 or 4

- improved go around engagement logic, to all GA engagement also in climb phase.

- Improved ISCS open/closing in VR

- Removed armed NAV mode when performing a TO without FDs.

- Prevent overwriting of cruise waypoint wind data when reaching TOC or initiating S/Cs.

- Improved contour matching for artifical cockpit window reflections

- Fixed managed speed profile in Go Around after acceleration altitude

- Fixed the ON light in the ENG 2 N1 mode switch for the IAE engine

- Simbrief wind upload should work again. (Note that it extracts the data from the wind data field, not from the flight plan itself.)

- Improved bleed pressure at cruise

- Improved altitude alert logic (C chord and flashing frame)

 

 

 

The update v1.9.1 is available via the Skunkcrafts updater, or going to your X-Plane.OrgStore account. And an upgrade from the X-Plane 11 A319 version is only US$10, just go to your X-Plane.Org Account to get the upgrade voucher.

 

Designed by ToLiSS

Support forum for the ToLiSS A319

_________________________

 

 

ToLiSS A319-122 v1.9.1 is NOW available from the X-Plane.Org Store here :

 

Airbus A319 XP12 by Toliss

Price is US$89.99

 

Requirements

X-Plane 12 or X-Plane 11

Windows, Mac or Linux 

4 GB VRAM Minimum - 8 GB+ VRAM Recommended

Not for commercial use. For any commercial use enquiries, please contact [email protected]

Current version : 1.9.1 (October 3rd 2023)

________________

 

NEWS! by Stephen Dutton

5th October 2023

Copyright©2023: X-Plane Reviews

 

Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Right Reserved.