Search the Community
Showing results for tags 'airbusa350 xwb'.
Found 1 result
Aircraft Review : Airbus A350 XWB Advanced by FlightFactor Of all the battles for supremacy in commercial aviation then nothing is going to compare with the twin engine market. It already has been a ding-dong battle between the Airbus A320 Series and Boeing's 737 Series and between them they have racked up thousands of sales, ongoing now is the next generation in the A320neo and the 737max to battle it out over the next few decades. A size up in aircraft category is also very complicated, as each manufacturer in Airbus and Boeing are both trying to lock in certain sizes in what is known as the "Big Twins" of the market. The Boeing 777 Series in dominating the market in replacing the veritable Boeing 747 has been very successful, but as airlines move away from the large hub and spoke model and back again to the original point to point services, then what was bigger is now not always better. Point to point markets demand very economical and high frequency services and to fit tightly the 200-350 seater markets, known as long and thin. The Airbus A330 filled this market, but its range and now being an old aircraft by today's standards and is also uneconomical, it's problem is that the -200 version has the range at 13,400 km (7,200 nmi) but is in the 250 seat market in a two class layout, the -300 can reach 300 seats but its range is restricted to 11,300 km (6,100 nmi). So one or the other don't fit. Boeing's solution is the 787 Dreamliner in 7,850 nmi (14,500 km; 9,030 mi) for the 250-300 seats with the -800 version and sweet spot 8,300 nmi (15,400 km; 9,550 mi) 280-330 seats with the -900 version. That slots the B787 nicely below the Boeing 777 and the coming 777X and fills the market. For Airbus it has been a two pronged attack to find an aircraft to fit below the A380 and go head to head with the Dreamliner and even the lower hanging fruit of the older 777's. Their solution is the A350-800 with 275-300 seats at 15,300 km (8,260 nmi) and the -900 at 14,350 km (7,750 nmi) with 280-350 seats, and the -1000 to cover the 350 - 370 seat market over the same 14,800 km (7,990 nmi) range which is B777 territory... and to just make sure to fill in all points just below the A350, the A330 will be updated to the neo (New Engine Option) to bring that aircraft up to date and competitive. To change things around and make life interesting the -900 version has been produced first to fill in the gap above the B787-800 and go head to head with the B787-900 and the -1000 version will be next for first flight to go for the B777 replacement sales of the earlier built and well into service aircraft. After the nightmares of the A380 development. Airbus could not want to have any problems in getting the A350 into service and quickly and as efficiently as possible. The timetable was tight, but Airbus in a way played it safe in using the tested, tried and true components from the bigger A380 and not going for a full composite fuselage like Boeing did with the Dreamliner. The results was an almost perfect first flight that was on time and date, and a testing program that ran almost like clockwork, the aircraft received its type certification on 30 September 2014 and the FAA certification on the 12 November 2014, and it is expected to meet its EIS (Entry Into Service) with Qatar Airways due 13th December 2014 with the first commercial service on the Frankfurt - Doha route in mid-Jan 2015. At this point the -1000 version of the A350 with a 15,600 km (8,400 nmi) and the 350-370 seats range is due next as the -800 version has stalled with the A330neo option filling in the gap quicker. Cathay Pacific expects to take delivery of its first Airbus A350-1000 in February 2016. The biggest battle confronting the A350 XWB is it's in service performance figures. Naturally the A350-900 will go almost head to head with the B787 Dreamliner in many markets, but the Dreamliner has a major advantage in it has a 20% reduction in fuel costs. Take this ANA Seattle-Tokyo leg for example as a 747-400 needs at least 136,000kg (300,000lb) to make that trip. The smaller, leaner 777-300ER needs nearly 100,000kg. But the Dreamliner, the only needs 63,500kg for the same Pacific crossing That is less than half of the B744. Yes they are in some ways different sizes of aircraft but the Dreamliner still has a notable 20% operating cost advantage. And those figures will certainly note the end of the B747's reign once the larger A350-1000 and B787-900 become more prominent around the ramps. The B787 does certainly have an operating cost advantage, but its still weaking 98.3% despatch reliability is going to be Airbus's number one target of the EIS of the A350 and its subsequent in service reliability and more importantly also meeting those high % percentage operational savings will only then mean a full order book or the success of the A350 XWB program. FlightFactor Aero No one doubts the quality of FlightFactor aero aircraft. Their Boeing 777 and 757 aircraft have been hugely successful and clever in the extension of the different variants in the "Extended" packages. The surprise was the change to another manufacturer in European Airbus in their next project which is this Airbus A350 XWB. Another challenge was the fact that Airbus aircraft are very highly intergrated with their Fly-By-Wire and Flight Control Laws, the two Boeing's were very good if not excellent in their flying characteristics, but the Airbus is completely a very different animal and only a few developers can or have been able to duplicate these complex systems for the X-Plane simulator. The best is Torsten Leisk that contributed to the QPAC Airbus A320-232 and Peter Hager's Airbus A380 Series, and here the flight laws and associated airbus fly-by-wire systems have been used in this FlightFactor A350 have been created and enhanced for this next generation of aircraft. In other words you fly the A350 more closer to philosophy and laws of flight than any other Airbus aircraft yet developed for X-Plane. FlightFactor aero have also with this aircraft created a new category or have split their product line into two separate types of aircraft in professional models (i.e. B777 and B757) and now another in the “advanced” version in that pro models have like lighting effects, particles, menus, high HD 3D graphics, textures and totally fully functional cockpits, and the "Adv" versions are noted as not so in depth but are still as hard to fly as the real machines. But in all but most cases here this "Adv" aircraft is still a very in depth simulation and the aircraft delivers more on flight and systems than most other aircraft in this price range and category, in this case you will not or never feel wanting there is something or a lot missing in the operation of the A350-800. Design wise with the aircraft power off the A350 XWB is very well designed and developed. detailing outside and inside is excellent, but I found the modeling slightly dark and more so inside. Airbuses have a very bright but grey corporate look about them and it is hard to get any directional light in here to lift the gloom a little. That is not to take away the excellent design work on show here. It is first rate and the best you can have today in X-Plane. Detailing abounds... look at the ailerons with no hydraulic pressure to support them... they all droop down. Why bother doing that? but this is the sort of detail you have around you, and excellent it all is. A start up will give you standing figures around the aircraft, this gives any ramp a busy feel and is well done. The A350 aircraft is a hard aircraft to model in the fact there is not that much information available except what Airbus gives out with their promotional material, there is no official documents and no in service details to gauge how the aircraft performs or is configured to everyday airline use. Remember FlightFactor would have started this project with even less data than what is available now. In that context they have done remarkably well, but we will have to forgive if in a few areas (and certainly in performance) that the numbers can be slightly off until the official ones start to drip through. Same is to be noted if a few things are missing or slightly wrong with the modelling. On the surface it looks absolutely perfect and very well detailed. Some small items look slightly odd at first in the fact the rear bogies are positioned front down and not rear down as with the B747 hanging undercarriage system. It is correct and so you can be sure if items like this are correct then other details are to. But close up the undercarriage here is surpremely well done, you expect a lot from a design of this price range and the A350 XWB does not disappoint. Powering up the A350 XWB Nothing will really work until you give the aircraft power if you want the full immersion of starting from cold. On the overhead (OH) panel there are two main and two backup power battery buttons. With power supplied you then need to set the ADIRS (Air. Data Inertial Reference System. ) which are three switches top left of the OH panel. Unlike some Airbus (JARDesign) aircraft there is only a short time frame for the ADIRS's to align. You have to tell the ADIRS the current position of the aircraft. This can be done two ways with the easiest by pressing the "Force Align IRS"on the "Options" page on the menus and that will align the aircraft to the its current position and start up the ND-Navigation Display. The second option is to select the FMS (Flight Management System) on the rear of the center console (it pops out) and insert your current airport (LFBO) and your destination airport (FAJS) in the FROM/TO box. This will then ask you to "Align IRS" and set up the alignment in that option. A350 XWB Displays The A350 comes with six large display screens. (left to right) Capt Outer OIS (Onboard Information System) - Capt Inner EFIS (Electronic Flight Instrument System) which has the PFD (Primary Flight Display) and the ND (Navigation Display) - Center Up is the ECAM (Electronic Centralized Aircraft Monitor) that includes the ED (Engine Display), SD (System Display), Permanent Data, Mailbox and WD (Warning Display) - Center Lower is the MFD (Multi-function Display) which displays the same information as the two outer OIS's - both right displays are a mirror of the Capt's Inner EFIS and and outer OIS for the First Officer. The Lower MFD function is the same as both the outer OIS displays These three info displays also have a "Cross Pointer" (on the real aircraft displays) that can be aimed to select functions on the screens, some areas on the screens can also have direct input from the keyboard when required. There is another selection for Mouse Users that have scroll wheels... You can select "Manipulate" to scroll, or "Zoom Only" to use the mouse for normal selections. I use the standard single click mouse select way. (the scroll is set in the "Manipulate" state when you start up). You also have the choice to have the FlightFactor Crew visible all the time or just from the outside view The Lower MFD and the OIS displays can be changed around on both the Capt's side and the F/O's side, not only in their actual position but the inner screens can be switched around as well with the buttons on the pedestal. Noted as "Capt OIS on Center" to move from the outer OIS to the center display and "Display Cycle" to move the smaller split screens around on any of the displays. This makes it very versatile for having the right screen where you need it, I liked the Flight-plan switched around on the right side next to the PFD, and all the panels "pop-out" for ease of use (visually) if you need that function and selection. Display Menus The MFD and OIS displays have a lot of menus, almost overwhelming in detail and far too many to do in absolute complete detail here... but we will cover the main areas. Top left are the main seven menu selections in: (Options) - Ground Service - Weight and Fuel - CAB(in) Announcements - Users Guide - Charts - Options. We start with the "Options" page that it is not related directly to the A350 but the noted FlightFactor options. You can set the speed you want the simulation to go at in "Time Flow", Difficulty Level, Structural Limits, Baro selection, Default Trans Altitude (direct input), ILS Auto Alighn on start up, Draw lines and Flushing option to default, Auto Pause, FCU Font, MFD Control (the pop-up screens) Mouse Wheel (Scroll) and Auto Helper. Other menu choices are "Auto Cockpit set up" that does all the hard work for you in setting up the aircraft, "Force Align IRS" (see above), "Jump 100nm" and "Jump to next Waypoint" both of these options require the flightplan to be loaded in the FMS. You can adjust the overall sound levels and save all these "Options" settings as default for future use or use the "Restore" to the default option settings. Ground Service: The menu is split into three selection pages in: Doors & Hatches - Ground Equipment - Pushback. Doors & Hatches - Pushback There is a big menu screen that will open and close all the aircraft's doors and cargo hatches. Just select the door you want to open via a tab on the menu. All doors and hatches open and close with a very vocal sound that can be easily heard from the cockpit. You can also "Open" and "Close" all doors and hatches in one selection. The "pushback is very good and simple to use... You have the choice of either to "Push" or "Pull" and selecting one of these will call the tractor and hook it up ready for use. Brakes off and the you can steer and use your throttle to control the tractor. Ground Equipment Ground service covers all the equipment attached to the aircraft or servicing the aircraft on the ground. The first left column is all the equipment available to service the aircraft (return to that in a sec..), The second centre column is the power provided to the aircraft in two GPU's (Ground Power Units) that can be accessed on the OH Panel and required if you don't start up the APU (Auxiliary Power Unit) on-board and either one or the other power source is required to set up the aircraft. The High-Pressure Unit (ground cart) is used to start the engines (or you can use the APU) and can have the AIR or Air-Con to cool the aircraft. Third or right column is the Maintenance Items (not available with this version). You can select "Stairs" to put a set of stairs at each front left side doors, Or press "Plane at gate" to put a single set of stairs on the rear left door. You wish you could select each door on the left for a stair as the two at left front feels like too many or simply have one at the front and one at the rear, but you can't. The rest of the ground equipment is a smorgasbord of vehicles and equipment... available are - Chocks, Passenger Bus, Fuel Truck (required for loading the fuel), Luggage Loader, Air-Conditioning unit, ULD Train and a Cleaning (Food?) Truck. All these items make it a very busy area around the aircraft and certainly give a great turnaround service feeling to the simulation. Weight and Fuel Here you have three menus that cover both Passengers and Fuel to be loaded (or is loaded) on the A350. First in "Passengers" you have an excellent menu to select passengers/cargo and set the aircraft's weight. You have four classes to select from and choices of cargo containers "96" Pallets and "LD3's". There is the simple option to select either Light-Middle-Heavy loads that fill the aircraft in one or the other configurations and load your preferences, you can clear the aircraft in one selection as well. Selection of "Fuel" can adjust your range which is handy because even with a light pass/cargo load can still mean a long range is required between certain long distance point to point flights. You can also cover all the other variations like with contingency and alternative requirements. Then you can load the fuel (Fuel Truck required to be attached) and you can see the loading from the ECAM displays on the flightdeck. When done you will have your correct final aircraft weight and see the fuel distribution. Third is "Cabin" where you can adjust the lighting and check out the trash and water levels. CAB (cabin) Announcements You will have a great time playing with the cabin announcements for your passengers in the rear cabin. There is a lot of choice, but the announcements are very low and inaudible sometimes? Just select what you want announced and press the play button as many times as you want to and annoy them. The cabin is very well appointed and designed in those four classes and the A350 has a great bar and passengers!... a few anyway in the first two classes, and you certainly notice the XWB (Extra Wide Body) of the aircraft with all the space inside. Users Guide There is a great built in users guide, that is a manual as well. It is also provided in a .pdf version if you like me use it on an iPad. The User Guide is very highly detailed, with the best way to set up the A350 in X-Plane with features and settings including the (plugin) "key" settings in the X-Plane "Keyboard" menu. For the biggest part though the manual (Users Guide) concentrates on the A350's systems and details, but there is no item by item descriptions on start up or instrument adjustments. A good companion to the user guide is a full checklist selection, that goes through every item to checked off or needs to be (you just have to know where they are), and itemises each selection as you work your way through the highly-detailed checklists. I recommend to study them to understand them all before using them in a current simulation, if not you will spend too much time sitting on the ramp working them and the positions of where everything is located. Charts You have Jepperson charts on your OIS, these are .png images of each chart page and that means you can't just drop in a .pdf downloaded from the internet. There are instructions in the aircraft folder on how to create your own charts and how to insert them for use... Charts provided are for airports: EBBR - EDDF - LGAV and LZIB. Options is the main menu... MCDU The MCDU (Mulifunction Control Display Unit) is positioned at the rear of the pedestal, and as noted it pops-out for convenience. The MCDU is a quite a simple but powerful affair on the A350. It is certainly not as comprehensive as the FF B777 or B757 versions which are replicas of the real FMC's on the Boeing Aircraft. It is noted that the later "Professional" version of the A350 XWB will have a full working Airbus MCDU. But you are not lacking here in the required basics. In fact it is quite clever in mating the real MCDU to this X-Plane slanted version. The bonus is you can load an already created X-Plane .fms plan from your current flight-plan folder and the MCDU will take care of the rest. You may sometimes have to do the odd join-up in clearing out any F-PLN DISCONTINUITY's to complete the flight-plan and have to also create your own SID/STAR's but I found these items easy to do and sometime far easier than spending hours trying to match up the correct SID/STAR to start or end a flight-plan. I found it just easier and faster to get the damn chart and input the fixes directiy. INIT You load in a .fms plan on the INIT page via the RK1 (Right Key 1) " F-PLN gives you your Flight-plan and you can scroll up or down through the fixes and Nav-aids. You can add in the "Overfly" (waypoint) preference if you want to as well. And input any speed/altitude constraints on the route. And you use the "Scratchpad" for input. You can see the flight-Plan on the OIS if you switch the displays around and it is excellent there for following the progress of the flight. The centre fix of the Flight-Plan will show on the ND (Navigation Display) if the NAV switch is set to PLAN. DIR DIR-TO (Direct-To) you have the direct-to option and the MCDU give you a list of options PERF You can insert your performance constraints in v1,vR and v2 and select your TRANS ALT in Transition Altitude. Thrust reduction/acceleration altitudes and temp FLEX that not must be below the outside air temperature OAT. PERF pages include: Take Off, Climb, Cruise, Descent, Approach and Go-Around. Like noted the MCDU is quite comprehensive where it really counts and gives you quite a lot of control over your performance, so the pro's will not be lacking in their ability to input their own constraints and performance tables. Ditto for the learners of this style of FMC in that it is also extremely easy to set up and fly this aircraft and learn the basics on how MCDU/FMC's work differently from a standard X-Plane FMC. It is well worth filling out all your MCDU data and complete in your preferences in every "single" box. Not only for the obvious in the way the aircraft performs, but also that the data is reflected on the MFD/OIS displays. You can't stress here enough of the importance of the pref data in the way it affects the flight of the aircraft. There are not a lot of entries by comparison to aircraft of this nature, but every data entry is important in the way the aircraft's performance at takeoff and the in the landing. You have a huge selection of data available from your OIS or MFD displays, In many ways it does mirror what is on the MCDU, and you can input directly into any of these data pages and load even your flight-plan. But the MCDU is quicker as you can do the same inputs on different pages that the MCDU will do once, and you could actually miss a page because there is so many. The Menu is the same as the MCDU buttons in: F-PLN - PERF - Fuel & Load - WIND - INIT, sub-menus cover a myriad of items about performance and your GPS positioning, radio settings, waypoints and fuel. It is really a nerd's heaven in cockpit management. Your Flight-Plan is one of the best features to monitor. You can select and install it just like you do in any X-Plane FMC (using the MCDU as noted is quicker) But it is the amount of information displayed that keeps you happy in the small hours. And also gives you the biggest note that will actually be there and still flying in the wee small hours? It is important that you set up your X-Plane "Time&Date" slider in how you want to do the flight... Living in Australia I will set my T&D to early morning or Zulu time to fly in the day. But as all you long-haulers know, the time you leave is calculated to the time you arrive, and here the A350 gives you an advantage, because it not only notes your time at every waypoint on the route but your actual arrival time! And here it is a mind-numbing to bed late 02.28 am in to the next day (or night), more cleverly is that it adjusts as you fly, so if you adjust the speed or have bad headwinds then the time will change to reflect that. So on one flight I lost 9min ETA in a speed change. You have to note that the actual time does not sync to your T&D until wheels up, which is slightly annoying, but once in the air the information is priceless including an update of your fuel load at arrival. It also notes your full distance and each waypoint distances. So you can see the importance of giving the aircraft all and more importantly the right data for the flight, the more data entered then the more information you get back. A350 Cockpit Except for the six display layout which is really the extra two OIS screens on each side, the panel and instrument layout is pure Airbus, If you know the layout of one and even the A320 layout then everything here will be in exactly the same place or position. The only item that is different is the Braking selection in "Autobrake Armed RTO" is a button press for take off and for landing you only have to adjust the braking action to the runway conditions. The PFD is the standard display with Speed and altitude tapes and V/S (vertical speed) on the right, The artificial horizon with turn indicator and landing ILS bugs are also standard issue. The PFD has the noted Auto-Pilot modes, alpha protections and flight director bars and in the lower section is the trim and flap position. Next is the ND (Navigation Display) with LS-VOR-Nav modes and ARC and PLAN and standard zoom adjustments. On the OH (Overhead) the aircraft comes with full systems in Top to bottom, Fire, Hydraulics, Fuel, Electrical, Air-Conditioning - Bleed, Anti-Ice and APU-Lighting, I recommend to read through the comprehensive manual on all the aircraft systems, because they are very well detailed. The center ECAM gives you a full display of all the systems and warnings, visual displays cover: Engines, Doors, Wheel, Fuel, EL/AC, EL/DC, Hydraulics, F/CTL, APU, Bleed, Cond (Air) and Press. All systems are functional and superbly reproduced in the center upper display. All pure airbus. The only real disappointment is that you can only fly from the Capt's side? you can't switch or control the aircraft from the F/O's side? and you miss that functionality. The Autopilot (AP) panel is standard Airbus, but you can only select one item at a time on the ND, you can have your Waypoints or your Nav-Aids but not together. The A350 also has the new X-Plane function of "Pull" or "Push". You can have the aircraft in "Selected" mode "pull" or manual selection or "Managed" mode "push" or automatic by the AP. Just make sure you know which mode you are in. The NDB/VOR selection for the MAP display is here in yellow. Central pedestal has the Radios, but it is in the MCDU that you set the frequencies for the VOR and ILS Nav-Aids. The ECAM selection buttons are here as is the flap selector in five selections: 0 (retracted) - 1 (1+F) - 2 - 3 - Full. There are 12 slats, 4 Flaps and 2 droop nose devices on the leading edge. Speed brake lever that is quite notchy to select the "Armed" position, so make sure it is engaged on the WD. Engine start is under the throttles to select engines IGN START (1 or 2), The throttle levers are really well done and have all the airbus modes A/THR - FLEX - TO-GA zones. The Reverse Thrust (toggle) is set either as a key or joystick activation on the X-Plane setting "thrust_reverse_toggle" (not "thrust_reverse_hold" like I usually do). To use you pull the throttles back to idle on contact with terra firma, then select the REV toggle (button or Key) and then throttle up to provide the REV thrust. Then Back to idle when required and re-key to disable the REV-THR. This system gives you great flexibility on how much thrust you want to provide for the REV thrust. Undercarriage actions and animations are first rate. But you have to get the landing right with those forward tilted bogies, the point the rear wheels touch if you get it right should be level with the runway, but it is not as easy as it looks, and they will trip if you get the first set of tyres on the tarmac before the rear set. (on a side note, you have to contact correctly... if you touch down too lightly the thrust reverse doors don't operate?) Lighting The internal and external lighting is first rate. The cockpit is a nice place to be for any period of time. It is not that highly adjustable with no moving focus lighting, but still very good with a spot light directly over the pedestal which is very handy. I found a nice sweet spot in just showing the edges of the panel with the overhead lighting as you get a dark panel with just bright buttons and displays with the setting of the overhead turned right down. And lighting in the footwells which most developers don't do. The reflections are very strong (but very good), but that requires an adjustment of the lighting to see out or landing at night. External lighting is excellent. Nose (known as take-off lights) and Wing landing lights and Taxi lights, There are very good Runway turn off lights and Wing scan (Ice) lights that light up the leading edges of both wings, both strobe and logo lights can be set to auto or manual on/off and in the right livery the logo-tail light looks excellent. The rest are the standard Nav and Beacon lighting. The cabin lighting is adjustable via the OIS menu "Cabin"and it is very good, but full brightness is to bright, and this menu also shows other items that are related to the cabin and door status. Liveries There are eight liveries with the A350 XWB package that includes a White (default), Home, Carbon and Qatar Home. The first four liveries are related to the A350 testing fleet, the other four are the airlines: Air France, British Airways, Lufthansa and a (Tulip) United. There are sets of 10 liveries you can purchase from different regions of the world that includes Oceania, Africa & Middle East, Asia, Atlantic, Europe 1, Europe 2 and Pacific. That adds up to 70 liveries plus the 8 with the aircraft. Quality is very good but not every airline (like Qantas) are flying the A350 XWB. Flying the A350 XWB The Airbus is extraordinarily interesting to fly... To a point you do allow the systems to do the work for you, but it is in the way the aircraft does this that makes it interesting, and how X-Plane now is seeing such great programming in flight. If you have flown an Airbus flight system before then you know how easy it is to set up... set your altitude (32,000ft) and just give the speed and HDG (Heading) buttons a push each to set them ready into "Managed" Mode. One of the great features here is the VD, or "Vertical Display" on the bottom of your NAV/MAP display. The importance (again) of programming the MCDU is highlighted here. If your flightplan is installed and the prefs "preferences" are filled in then the VD will show with the zoom out over a distance your profile of the climb to your set cruising altitude. The aircraft is very good at finding the very best climb rate (pitch) known as "Op Climb" (Open Climb). The aircraft will over the climb to altitude change the V/S (Vertical Speed) to match the conditions of the climb. That includes the points you retract the flaps and your transition point. Takeoff is brutal, and you can climb easily between 3,500ft per minute to 4,300ft per minute, or in other words almost straight up. Certainly if you have a heavier weight the aircraft (Open Climb) will adjust to the load factors. It is then important you match the correct high pitch on leaving the runway or you will get alarms or the aircraft when you activate the autopilot will pull the aircraft nose up to match the required Op Clb profile. Once you have left hard stuff and 300ft at the right pitch, then you select the AP1 (Pilot) and ATH (Auto-Thrust) and bring your throttles back into the "A/THR" detent or "THR CLB" on the PFD and the aircraft will then go to the flightplan and correct climb speed while managing the correct thrust and climb rate. To a point it is like riding a Saturn V, you are just sitting there as your climb profile adjusts to the correct vertical speed and is constantly adjusting the speed to flap retraction and transition altitudes. You will find around the orange marker the V/S will drop to about 1400ft per min and then resume when the speed has built up back again to a faster position to 3300ft per min till it again resumes a more relaxed 1600ft per min and continues forever on climbing upwards. Spread out your zoom into the distance and your waypoints (fixes) are noted with the climb profile all the way to your set altitude. At fixes heading changes then pull the zoom back to 10nm and note the curve of the flightplan to the new heading. The aircraft will turn with a smooth grace along the flightplan line. After the initial FL320, I stepped up to my final cruise height of FL365. Sounds are very good right through from start-up to cruise, I did find them a bit whiny in the cruise mode and after a period of time they gave me a slight earache. But high-pitch sounds don't agree with me, so that is personal thing... but I'm not that crazy about it... I have been 100m behind the nozzle of a Dreamliner and these new-gen latest high-bypass engines are whisper-quiet "is it actually running?" is how quiet they are, we may need to hear a real A350 XWB to see how different they really are. You have dual adjustable screens Nav/Map screens, which are great for different perspectives on the landing pattern. And the VD (Vertical Display) is used the same way as the half-moon line on the Boeing 777 to target your initial and final approach heights. The landing brakes are set to their setting and shown on the PFD as: BRK LOW - BRK 2 - BRK 3 - BRK HI (High), the 2 or 3 is medium in the old way. Note the smooth turn curve at a low speed and height, it banks the aircraft perfectly for a final approach. On finals I took control of the speed and selected, "Selected" mode and 160knts, the purists will roll their eyes but I found the aircraft going too fast in "managed" mode or 270knts and needed to pull that speed back to get ready to align up the runway. You however don't really move out of "managed" mode on descent, So I found it was very important that the QNH "nautical height" is set on the MCDU (FMS). So to set the QNH correctly for the aircraft is to set and adjust the speed to the height (or pressure). Flying an approach with the QNH set correctly was very different than if it was not set, and the speed was then controlled perfectly in the descent. Handling at low speed is very good, the aircraft will depending on the weight will land even as low as 140knts, the A350 does tend to point nose (pitch) down on the ILS and that can create the issue of pulling the aircraft nose up to flare... but that can be quite compromising in that if you get it wrong in to much high pitch you will suddenly balloon and float (X-Plane issue) or land nose wheel first (not enough pitch) the middle (perfect) position is a bit of a feel to find at first, but possible and easy after a few landings. Once down and after the armed speedbrakes have activated, then activate the THR-REV (key or joystick button) by opening the REV doors and powering up the throttle. I love the control this system gives you on the amount of thrust you want... off the throttle and then rekey the REV doors to close. Once at taxi speed you can then clean up the aircraft and head for the stand. Summary It is in a way a contradiction the A350 XWB from FlightFactor aero. It is massively detailed and certainly with the menus and systems, but there is a simplicity to it as well. It is a clever contradiction because it covers a lot of bases from users that are new to simulation and others which require the very deep immersion that you expect from aircraft of this price range. The A350 will keep both camps very happy indeed, but it is not as deep or as involving as the Boeing 777 or Boeing 757, but then again it is not meant to be either and maybe the "Pro" version will fill in those small gaps. Like many aircraft released today for X-Plane the A350 XWB is another aircraft that the more you put into it then the more you receive back out again, It is very deep into systems and menus, so a bit of study and flight pre-planning will go a long way in getting the depth that will reward you, so a good start is putting aside some time to study the (excellent) manual that will certainly help in understanding the aircraft and get the best out of it. likewise it is also far easier to quickly set up and fly (certainly with your flight-plans being X-Plane .fms plans) that can allow you to set and fly a flight in a very quick amount of time, even from a cold startup. So you won't be spending a hour or so programming the FMC, if you don't have any saved routes like you do with the B777, B757 or JARdesign's A320neo. However the total replication of a FMS (Flight Management System) like on the B777 and in this case the SID/STAR component is missing for now, do you miss this? well yes and no, no doubt we want the aircraft to be an almost perfect duplication of the the real cockpit, but the ease of programming the route and flight prefs does make it far quicker and gets you flying almost immediately. I miss the First Officer (F/O) point of view of flying the aircraft, and the option of switching from the Capt to the F/O for takeoff and landings, you can assign the joystick to either position, but it is for a visual point only and has no control (or movement on the F/O side). For value, the aircraft is very well priced even if it is as noted not the full "Pro" version, I found the aircraft more feature loaded and with great quality than most aircraft in this competitive price range. Features abound and you will be the happiest pilot on the ramp of any hub with the way you can set up and service the aircraft. I like to fly the whole deal from start-up to shut down and everything in between including loading and unloading the aircraft. It is not just the flying in simulation that counts, it is the total experience.... and in that department the A350 XWB does not disappoint. In the flying experience it is very Airbus with the fly-by-wire, alpha protections and control laws, It has the best X-Plane Airbus plugins and you will want for nothing. This is the very best in Airbus flying yet in those perfect airbus automated procedures and laws, even if the aircraft does a better job than you... and that is the Airbus way of flying. _____________________________________________________________________________________ The Airbus A350-900 XWB Advanced from FlightFactor is NOW Available from the X-Plane.Org Store. Price is currently US$ 49.95 : Get the - Airbus A350 XWB Advanced - Here Livery packs at US$10 for ten liveries are available here: A350 Liveries Include: North America, Oceania, Africa & Middle East, Asia, Atlantic, Europe 1, Europe 2 and Pacific. Documents and Install, Download is 209.10mb, that is unzipped into your Heavy Aircraft Folder of 309.40mb. The aircraft will only fly in X-Plane version 10.30. You have to insert a key to activate the A350 XWB, and it is highly recommended you totally restart and reload the A350 XWB from scratch from the desktop. To align the (SASL) plugin correctly. Features Fully custom aircraft systems (elec, hyd, air cond, ADIRU, etc.) Fully custom ECAM monitoring system with all screens and functions included Fully functional airbus style alert system with multiple status and procedural lists Fully functional interactive airbus electronic checklist system Airbus a350/a380 unique “touch screen” interfaces with dozens of screens and hundreds of functions Fully custom and unique MFD (multifunctional display) system with most of flight planning pages implemented in a new graphical interface, as well as FCU and radio backups just like on the real plane Full OIS screen system with options, ground equipment control, passenger and cargo loading, and even a full user’s manual inside the plane. Old style MCDU and fully functional aux instruments as backup. Full FBW with Highly realistic implementation of the Airbus “normal law” by QPAC – the most realistic fly-by-wire implementation for desktop flight simulation. In v1.0 an advanced flight planning interface (based on XP native data) Basic SID/STAR implementation using X-plane fms-files that you can create yourself and share with the community. "What you see is what you fly" flight path indication on the ND (i.e. curved trajectories with the turn radius properly computed based on speed and angular turn distance.) Implementation of all Airbus AP modes, except some non-precision approach modes (Selected and managed modes, speed constraints respected, "at or below" contraints in phase climb, "at or above" constraints in phase descent.) Full PFD and ND displays with fully independent display and different data sources for the captain and copilot displays. Independent autopilots Many new options like scroll wheel support for switch manipulation A very advanced 3D model with HD textures and complete and animated mechanics. ______________________________________ Review by Stephen Dutton 7th December 2014 Copyright©2014 : X-Plane Reviews Technical Requirements: Windows - Linux Fully Supported Mac: Beta version at this time only - Please only buy the Mac version if you feel you can be a beta tester. 1Gb VRAM, 4Gb RAM Current version: v1.0. Last updated: December 7th, 2014 Updated store# Review System Specifications: Computer System: - 2.66 Ghz Intel Core i5 iMac 27” - 6 Gb 1067 Mhz DDR3 - ATI Radeon HD 4850 512mb Software: - Mac OS Mavericks 10.9.4 - X-Plane 10 Global ver 10.30 (final) Addons - Saitek x52 Pro system Joystick and Throttle - Bose - Soundlink Mini Scenery - LFBO Toulouse-Blagnac - Aerosoft (New X-Plane.OrgShop US$21.50) - FAJS O.R. Tambo International Airport - tdg (Free .Org)