jmhelms
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Posts posted by jmhelms
-
-
Great plane...beautiful...
I am using XP 11
and the plane will not fly a flight plan...
Am working with Alabeo on a fix....a popular
on-line fix does not seem to work...failure
of plane to fly flight plan is a bummer for me...
The DA 40, which I also purchased, will fly
a flight plan...
-
Hi Donsol...thanks for your reply and you
are spot on about AP not workig well at
or near maximum speed....
Fro further researching this topic on line,
I prepared the following...the "fix" is from
2012...I tried it on the Evictor and it and
the speed issue seemed to have helped a
lot...
"First: what is your altitude and airspeed? The autopilot will have a hard time maintaining the altitude if you are flying near-redline airspeed.
Open the X-Plane folder - don't start X-Plane itself.
Open Plane-Maker.
Click on Expert tab at top middle.
Select Artificial Stability.
Click on Autopilot at top middle.
Tick the box at top left: use custom autopilot constants (to undo changes untick this box, close window and save).
Make the changes as I suggested.
Close window.
Click on File.
Choose Save.
Start X-Plane and see if the autopilot works now.In the autopilot settings for X-Plane, change the parameters for the pitch-controller: special/set autopilot constants/use custom autopilot constants. Change to this:
pitch prediction: 2.4 seconds
pitch error for full elevator: 28
pitch response time: 6 seconds
pitch rate: 5 degrees/second."The above categories have to
be interpreted slightly for XP 11...
I assume no responsibility if the above does not
work for anyone or causes any uninteended
consequences...
Cheers, John H.
-
Nice plane...good value....using XP-11 and
cannot get the autopilot to hold altitude....
porpoises up and down...if anyone has a
solution, please let me know...wrote
X-Plane org about it and no reply..
News! - Released! - DA42 Twin Star by Alabeo
in News! The latest developments in X-Plane
Posted
Hi Jan...I have the plane and i too had the problem...
I assume you have properly registered the plane
after purchase...
If memory serves me, there is a tool tab, accessible
on the left-hand side of the screen that has some Alabeo
settings...one of those is the culprit...like an open door or
something like that...
Hope this helps...
John H.