Jump to content

Blueb

X-Plane Fan
  • Posts

    16
  • Joined

  • Last visited

  • Days Won

    2

Reputation Activity

  1. Like
    Blueb reacted to Stephen in Classic Aircraft Review Updated : Aircruiser 66-75 v1.1 by Hangar 23   
    Classic Aircraft Review Updated : Aircruiser 66-75 v1.1 by Hangar 23
     
    Very early classic aircraft are very interesting, more so when they are so rare. This aircraft is about as rare as you could could imagine, only 23 of them were built between 1930 and 1938. But they have a significant place in Aviation history, only to be replaced by the United States federal regulations that prohibited single-engine transports on United States airlines, virtually eliminating future markets for the Aircruiser.
     
    Bellanca Aircruiser and Airbus were high-wing, single-engine aircraft built by Bellanca Aircraft Corporation of New Castle, Delaware. The aircraft was built as a "workhorse" intended for use as a passenger or cargo aircraft. It was available with wheels, floats or skis. The aircraft was powered by either a Wright Cyclone or Pratt or a Whitney Hornet engine. The Airbus and Aircruiser served as both commercial and military transports. The first Bellanca Airbus was built in 1930 as the P-100. An efficient design, it was capable of carrying 12 to 14 passengers depending on the cabin interior configuration, with later versions carrying up to 15.
     

     
    The Aircruiser's distinctive shape, gave it the moniker of "The Flying Ws" and this hardy design was still flying in Canada well into the 1970's . Is it a Bi-Plane, sort of, as the lower W is still a part aerodynamic surface. When you look at the design closely, it is extremely clever in holding up and bracing the main wing, as for also being a support for the landing wheels.
     

     
    The Aircruiser is a "Tail-Dragger", most were back in this 1930's period, but the early evolution of the multi-seat passenger aircraft is highly perceivable, back in the day, it was, still is a very innovative design. For an aircraft, it looks heavy, but sturdy is probably the best description
     
    Hangar 23 is a not really a new entrant to the X-Plane Developers affiliation, but a ex-TorqueSim developer. Still the Aircruiser is an interesting one in the choice of aircraft to debut their talents in doing their own Studio. Technical information of the Aircruiser is rare, but there are two surviving in existence, "CF-BTW," a 1938 model in the Ericson Collection in Madras, Oregon, incredibly the aircraft is still airworthy. The second is "CF-AWR" named the "Eldorado Radium Silver Express", built in 1935, and is under restoration at the Western Canada Aviation Museum in Winnipeg, Manitoba.
     
    Update v1.1...  This review has been updated to version v1.1, this includes a set of changes that came out only a few weeks after this original release review was published, the changes are noted here v1.1
     
    Installation
    The download for the Aircruiser is 1.18GB, with an installation of 1.38Gb. But the installation file/folder system is a slightly complicated. Hangar 23 has selected to put the main Aircruiser file within a folder of a folder? So the first folder is "Aircraft" followed by a folder named "Hangar 23" , with the actual "Aircruiser" aircraft folder inside, or buried in layers of folders? Honestly the first "Aircraft" folder is not required, so just install the "Hangar 23" Folder directly into your X-Plane "Aircraft" folder with the Aircruiser folder inside.
     

     
    All the installation notes are in the excellent manual, but the doubled up "Aircraft" folder creates confusion... 
     

     
    Detail and modeling
    For an aircraft of this size, an installation size of 1.38Gb can only mean one thing, quality in detail. Remember this is a first time effort from Hangar 23, but the detail and quality is outstanding. Both an X-Plane 12 and X-Plane 11 versions are included in the package, but it is the XP12 version on show here with it's more exponential PBR (Physical Based Rendering) effects and lighting. And it really blows you away.
     

     
    X-PlaneReviews are usually quite lenient when the studio name is new, in overlooking sometimes even the obvious mistakes or poor areas of first time production...  But already with the quality of work behind Ulrich, you go straight into the "Masters" level, but this is still a first release from Hangar 23 is just outstanding...  and an highly impressive debut for the Studio!
     
    And all with an aircraft so rare...  the beauty of Simulation is that iconic and classical aircraft can be recreated, their forgotten time, brought back and to live again, or in this case fly again. At the core of this Aircruiser Simulation is just that very aspect, bringing the past alive again for you to absorb and interact with. 
     
    But this is outstanding work...  all the wing braces and support wires are sensationally done, every bolt, castle nut and Cotter Split Pins, are modeled here in detail, leading edge panels are worn and authentic, the struts in detail are excellent, you have to admire it all.
     

     
    If you are a detail junkie, who loves to spend time investigating the quality of the work, then you will love this aircraft, as it's a museum piece brought alive. The massive top wing looks canvas, and you can see the frame that the material covers, it's a lovely formed wing as well. Actually two separate wings, attached to the fuselage.
     

     
    This was the golden age of innovation for aircraft, the transition from wood, canvas to metal, so you get sometimes the mixture of the two eras in the one development as the changes moved on forward.
     
    The detail is just gobsmacking. The panels are perfect and so are the bolts that hold them in place, windows and it's thick glass are worn and glazed to perfection... The Cyclone SGR-1820 it is rated at 760 hp, as is the giant three-bladed geared propeller, and all gloriously there to admire. The engines internal intricate detail of metal and brass pipework is very impressive.
     

     
    The Aircruiser is flat sided, there are no curves in the doors and the windows are more nautical portholes than aircraft, but it's all beautifully done, and it is all built like a tank!
     

     
    The two main landing wheels hubs, tyres are massive, but simplistic as well, detail is right down to large CirClip to hold the rim onto the hub.
     

     
     There are four doors that can be opened, two small high cockpit access doors, one left passenger door, and a very big odd A shaped cargo door...  all four doors are so authentic to the design, with the Cargo door in two sections that folds.
     

     
    Honestly, it is like a flying shed inside, totally weird.
     

     
    The interior is impressively done, metal and wood dominate, SO much weight in the construction, how did this thing get off the ground?
     

     
    It's all metal piping and blocks of wood, many trees were felled in the creation of the interior, a far, far cry from the ultra clean, state-of-the-art LED lighting Airbus interiors...  this is doing it rough. The passenger seats are a pipeframe, with a strung canvas seat, you wouldn't want to go to far on them.
     
    Pilot seats are a metal bucket, the pilot gets the luxury of a cushion, the CoPilot the hard metal base. The cushion is required not for comfort, but to be elevated to see over the extremely high instrument panel.
     

     
    The yoke is a big hefty iron thing, beautifully skillfully designed and modeled, you can hide it via a hotspot centre yoke. The side quadrant is again excellent, with the Throttle (T), Propeller (P) and Mixture (M) levers, notable that in 90 years the controls are still as relevant then as now. Lower rudder pedals are also big hefty iron contraptions, you need to be Popeye with his strong arms and legs to match, to fly the Aircruiser.
     

     
    Notable are the two trim winders, one left for pitch/elevator adjustment, and another on the forward roof for the rudder trim. Point to make is that there is no visual trim setting, so you don't know if they are both centred or not, but a guide is two full winder rotations each way. Note the old fashioned brake lever and flap selector handle.
     

     
    -v1.1- in the update Hangar 23 added in a visual marker on to both of the trim winder panels, it's only a small round brass tack, but it does show you your current trim position.
     

     
    Main instrument panel is amazing, this is simply a panel with inset instruments that is highly authentic. Note the boxed Whiskey Compass
     

     
    Again the layout is quite familiar... with a Standard Six layout. Top left is the Airspeed Indicator (MPH/KNTS), Vertical Speed Indicator (V/S), very basic Rate of Turn Indicator, below offset is a Directional Vacuum Gyro (Heading), Altmeter and Horizontal Reference (bank).
     
    Far left is a RPM dial, Manifold Pressure, and top right a CYL TEMP. Right panel has Volts, OAT (Outside AirPressure), Oil Temp/Pressure and Fuel Pressure...  top Ignition Switch, Fuel Gauges (twin), PPH (Pounds Per Hour) fuel flow and a ELGIN clock. Lower left are a row of switches that cover Battery, Generator, Nav (lights), Landing (light), Starter, Coil Booster, Fuel Pump, Panel Lights and Cabin Light. Far, far left is the fuel tank cock; Both, Left & Right.
     
    It's all so impressively well done, the flaked tired black metal facia is very authentic to an aged old aircraft of this generation.
     
     

     
    - Update v1.1 - Added in the update were two instrument items both related to the "Carburettor Heat". A knob lower dash, and a gauge middle panel centre right.
     


    Menu
    There is a banner menu "Hangar23Aircruiser" that has two menu options; "Options" and "GPS Style"
     

     
    Options: There are six options, Autopilot Toggle, Strain Gauge Toggle, Real Autorudder Toggle, Steerable Tailwheel, Show Pilot and Use Clipboard.
     
    The Aircruiser comes with a very basic 2-Axis "Sparrow" Autopilot, basically a set "Holds" Pitch and Roll Rate. Second option is to add on a "Strain Gauge" or Trim indicator. Both are positioned lower centre panel
     

     
    We will go more into the "AutoRudder" in flight, but if you want to disconnect or activate the the AutoRudder you can do so via the menu option, you can also use the hotspot on the (front) Whiskey Compass to do the same action.
     

     
    The Tailwheel is steerable by the rudder pedals, but if you want a free castoring wheel, you can disconnect it via the "Steerable Tailwheel" option.
     

     
    There is the option to show or hide the pilot. He is fully animated in rudder and pitch (forwards & backwards) and seems to have his hands full in controlling the aircraft, he is very good here and well done.
     

     
    Next in the "options" menu is the "Use Clipboard". In the right side pocket there is a VR (Virtual Reality) clipboard (also clickable).
     

     
    This really the "Fuel & Weights" menu...  as you can adjust the fuel and Pilots, Passenger, Cargo weights by scrolling them in. They can be set in Lbs or Kgs and the "Load", "Empty" (weight) and Full Gross weight can be seen. You can "Save" your settings, and then "Load" them.
     
    Another note is that between flights the Aircruiser will save and reload the same settings to the next flight, until you adjust them.
     
    Last two separate items on the "Options" menu are "Reset AP Tuning" (Autopilot on/off) and "Reset AutoRudder Tuning", resets the rudder position to central.
     
    An option not shown in the menus, is that if the power is switched off, then the chocks are positioned on the front wheels.
     

     
    The second setting of the menu tab is the "GPS Style", here you can select between the Laminar GNS 530 GPS, or one of the two RXP (Realistic) GNS 530 or GNS 750 GPS units if you have that external additional option. I don't have the Realistic option so that install is not visible here. The GPS units are position on the roof forward, with also a default custom style COMM radio above, and a Transponder panel below.
     

     
    - Update v1.1 - Introduced a set of "Floats" for the aircraft. There was actually a Float version of the Aircruiser, notably two aircraft were converted...  noted here as a "Floatplane". The "Float" version can be selected on the "Flight Configuration" menu.
     

     
    "Huge" and chunky floats they are, there is no Amphibian variant (land wheels)
     

     
    The waterborne Aircruiser sits nicely on the water, also moves around on the fluids really well considering the size and weight of the machine. You need those extra huge extra tail fins to keep the aircraft straight.
     

     
    There are several ways to control the water rudder up/down movement. One (the easiest) is to set a keyboard command to "Toggle water rudder", or use the pull (up) or (down) slider on the floor, left behind the flap lever. Water rudder steerage is via your rudder pedals.
     

     
    Float detail is like the rest of the aircraft, exceptionally well done, lovely cleats and perfect cables
    ____________
     
    Flying the Aircruiser 66-75
    You can't at all see out of the Aircruiser, the long nose is way up there, blocking any view, as the tail is way back down there behind you. The only option is to lean very far left to try to see the ground.
     

     
    You would think the Aircruiser being so old-fashioned would be a pain to start, but it's quite benign and easy as long as you do the right procedure. Fuel on "Both", Fuel Pump on, then the most important switch, the "Boost Coil" switch to on. Mixture just to above the (Auto) lean red marker...  then up the "Starter" switch, the prop will turn, then gradually fire into a running engine... 
     

     
    Both the start up and shutdown of the Cyclone SGR-1820 is exceptional, no fast artificial start or shut down here, but it all comes with stutters and engine positions that are very noticeable, as is the churn of the starter motor against the pressures "clock", "clocking" of the starting engine, its a great and a very realistic re-enactment of the starting, and then the stutter of the engine shutting down, I loved it.
     
    I have a horrible history of trying to control tail-draggers, spinning loose tail-wheels have given me loads of grief. But not here though... as mentioned you can disconnect the tail-wheel to be free, if you love that uncontrollable chaos. But for the rest of us the tail-wheel acts through the rudder pedals, but also through the usual "Tiller" yaw. This makes the Aircruiser very easy to manoeuvre around on the ground or on taxiways. Braking and the toe-brakes work normally as well.
     

     
    For once you not fighting the aircraft on the ground to go into the direction you want, but the view internally is hard work to keep it all on the narrow taxiway. So you have a habit of visually taxiing externally until you understand the aircraft more.
     
    Very important is to adjust the rudder trim 50%, or a full winder turn to the right. The SGR-1820 is a very powerful force on takeoff, the asymmetric thrust is huge, it pulls you so hard to the left, that even full rudder is required off the line...
     

     
    The Aircruiser for all it's massive weight is sprightly off the line, your working the pedals to find the right balance to keep the aircraft straight, it does thankfully nicely change direction tail-wise to your inputs, very quickly the tail is up at 40 MPH, and there is tons of lift from those wings, at 60 MPH+ and your now flying. The point from "off the line" to "Airborne" is very short, so no flaps are required, time to adjust your direction is short as well...  so once off the ground I was already veering right away from the runway, I didn't try to correct it, but just went with the flow and climbing turn, then leveled it all out straighter when higher. With practise with your rudder inputs you could keep it in more of a straight line out...  it's a total feel thing, a feel for the aircraft.
     

     
    Pitch trimming is nice, but I recommend a keyboard input than the badly positioned side wall-winder, same for the rudder trim on the roof...
     

       
    You have so much power, the Aircruiser is super fast for an aircraft of this size and age...  it's a very physical aircraft to fly, you use the rudder all the time, then finally finding the right amount of input to keep the aircraft in a straight line, a tough idea, with the amount of asymmetric thrust coming at you all the time. The 66-75, as featured here, could produce up to 730 hp from sea level through 5800 ft, where then the power built higher to ~760 hp
     

     
    Maximum speed is 144 kn (165 mph, 266 km/h), (but it feels far faster), Range is an amazing 608 nmi (700 mi, 1,130 km), and the Service ceiling is 22,000 ft (6,700 m), but the average cruising altitude is around 10,000ft, still fast and high for a 90 year old design.
     

     
    Hangar 23 has provided a tool, called the "AutoRudder function", a sort of A.I. tool to take the strain out of flying the Aircruiser. On the ground the rudder control functions as usual. So it was important to properly trim the aircraft prior to takeoff and landing. In flight, the autorudder system then takes control of the rudder, and will attempt to keep a slip angle as dictated by the yaw axis of the joystick. This allows the pilot to slip the aircraft even while the autorudder is active, such that even crosswind operations become possible with the system active. In other words it flies like the X-Plane tool when you have no yaw axis joystick, the wings are connected to the rudder.
     
    This gauge will merely prompts the pilot on the direction of trim needed to take load off the “servos”. Unlike the autopilot, the autorudder does not disconnect under a high strain, nor is it dependent upon the aircraft’s electrical system to operate (Cable operation).
     
    When activated (via the menu, or Compass)  the autorudder has a visible gauge, located on the yaw trim handle base plate.
     


    If you are going to deactivate the autorudder during normal flight, first adjust the rudder trim according to the strain gauge, otherwise a very sudden and very unpleasant disconnection will occur. It works very well...  but switched off the AirCruiser has a habit of yawing left, almost going around in circles....
     

     
    You can try to trim it out? but it's hard to find a neutral flight, I did find a position input that worked, slight right rudder and slight stick right as well, but it's tiring for any distance, short or long...  the AutoPilot is not much better, tricky to use is to centre the heading.
     

     
    You adjust via the "Roll" or "Up/Dn" switches, as per the three lights, red (left), white (centre) and green (right). But there is a delay in the operation that can make you over trim, I never quite mastered it...  so again even on the Autopilot, I went into a slight bank in left handed circles and couldn't the aircraft fly in a straight line unless under manual control. It's the sort of tool that all of a sudden you will understand it and get it right, with time and persistence. This system is like the Sperry Type A-3A. You will need to trim the aircraft perfectly, so the heading is as close to where you want to go and level, flying as straight as you can, then turn on the AP, trying to trim later while the Autopilot is active is a far harder situation.
     
    -v1.1- In the update a lot of attention was given to pitch stability and improved rudder response, also this adjustment also works better with the "Sparrow" Autopilot, in both manual and automatic orientations the aircraft felt far more stable, more directional, than with the past banking action...  certainly a big improvement in this area.
     
    Lighting
    Lighting internally and externally is basic, which is to be expected. There is one switch for the instrument lights, and another switch for the cabin lights, two spider-web looking ones forward and two roof lights rear, it all looks quite nice at night...
     

     
    The GPS install looks bright and also odd in this old cabin, but it's very well done and easy to use.
     

     
    Externally there are only again two light switches...  Navigation, red, green and white tail, the other light is a left wing mounted Landing light, that look and is quite effective. There are no strobes or beacon lights on the aircraft...
     

     
    Flight notes by Hangar 23 notes "DAY - NIGHT* - VFR...  *Poor visibility and the antiquated aircraft lighting scheme will present additional challenges during night flights". In other words it is not really an aircraft to be flown in the dark...
     
    Sounds...  are a bit of a mixed bag. Overall they are excellent, the startup is an aural experience, and so is shutdown, external engine noises are very good right through the range of power outputs, that's the good. The poor is the buzzy interior sounds, that have a sameness of a consistent droning buzz with no fluctuations, even over a short distance I was distracted or even bored with the noise, The Aircruiser maybe really like that in the air, but I didn't really connect with them. The lower power outputs (on the throttle) are however better. Notable is the Aircruiser engine’s 16:11 gear ratio, for the propeller spins slower than the engine, but all readouts and aural sounds are based on the engine and adjustments should be made according to engine state rather than calculated propeller RPM.
     
    -v1.1- There was a lot of attention to sounds in the v1.1 update...  there was improved cockpit sound origins and changed FMOD engine sounds (which both will be updated incrementally going forward as improvements happen). The developer was at least very responsive to comments, this area certainly needed more better aural sounds.
     
    Time to head back to Shoreham (EGKA). A tricky place to lineup, for the mass of trees around the field. All the runways are hidden from view...
     

     
    ....   if the system is active on final approach, the autorudder will check if the rudder trim has been appropriately set for the upcoming power reduction. If the trim is not suitably centered, the system will intervene and reset the rudder trim to near center. This may be noted by the clicking of the trim’s chain drive, as well as a mild rolling tendency during finals. Myself I turned the automation off to feel the aircraft on the approach phase, plus a single wind of the rudder trim, to reset it as it was on the takeoff phase. The handling felt normal, as did the approach. If however the autorudder is active, then it will disconnect on landing.
     
    Nose up to rub off the speed, as there is no "white flap use zone", I guessed in setting the flaps to below 100 MPH, actually below 90 MPH, and you get a slight lift on each extension...  but the transition now down to 80MPH with now a slight descent into Shoreham it all felt perfect. The flap lever or floor handle is extremely well done. It's both a brake handle and Flap handle in one.
     

     
    Over the coastline, and there is still no visual on the runways. Then finally the field is in view.... so I drop, in also trying to miss the treeline.
     

     
    ...  but I realise I am too high, and becoming too fast in trying to get down to the grass strip. It's still a very good try....  but I have to abort and climb out!
     

     
    I will note the throttle inputs. If the Aircruiser is trimmed (correctly, or well). The Throttle control is very, very good, as you can control the height via the power. Full power to climb out was excellent (after that slight delay), but I found the Aircruiser to be quite normal in the approach/landing phase as any other heavy single-engined General Aviation aircraft. However you have to be aware of the weight around you with using the throttle power, and that tendency to yaw right with the huge power increase, but you soon adapt to the characteristics and the personality of the aircraft... fun? yes immensely, also a challenge to get the skills right in this cockpit.
     
    I didn't want to lose sight of the field layout, now I had found it. So it was a tight turn around back to the other opposite threshold. But be aware that too tight a bank and the Aircruiser will slip badly and lose height towards the lowered wing, there a sweet spot to find in the bank and before the slip starts to emerge, all this is required to get the best rotation of the aircraft.  
     

     
    Lower and slower this time....  and it feels right.
     

     
    Then slowly descend, descend "keep it steady" and I touch around 65 MPH, I am not to worried about the speed, as the Aircruiser on grass will dramatically drag itself slower. Toe brakes are still the best tool to stop the aircraft rotating hard right, then left on you, as this happens once the tail goes down, it's tricky, but with practise it works in keeping you straight... 
     

     
    I'm down, and arrested before the end of the grass strip...  not bad I say.
     
    Liveries
    There are six liveries, one Blank (default), and two liveries that are blank white, but one has a metal nose cover, and another has the same metal nose cover & metal tanks. All are nostalgic except the off soft purple Landmark?
     

    _____________
    Summary
    Extremely rare aircraft are always interesting, this Bellanca Aircruiser or Airbus, is one of the rarest as only 23 aircraft were built between 1930 -1938, it is also the famed "The Flying W" and this hardy design was still flying in Canada well into the 1970's.
     
    Hangar 23 is a not really a new entrant to the X-Plane Developers affiliation, but a ex-TorqueSim developer. And this unusual rare aircraft is their first project for the newly-named studio and the X-Plane Simulator. The Aircruiser is available as two separate packages for both X-Plane 12 (as shown here) and X-Plane 11.
     
    The quality here with the Hangar 23 Bellanca aircraft is very much on show, as it is highly developed and polished. Modeling is absolutely first rate and the detail is highlighted by this experienced and mature developer. As the aircraft is so rare, the detail in the reproduction is simply outstanding, to the point of recreating an era from a long time ago, and with a couple of modern tools thrown in as well, but not to the distraction of the authenticity of the original aircraft. Obviously this is a project of a labour of love, but still delivered with quality and polish.
     
    It is old fashioned in design, but the Aircruiser comes with so modern helpers like a "Sparrow" 2-Axis Autopilot, a custom AutoRudder feature, and GNS 530 GPS, and the option for Realistic RXP GNS 530 or GNS 750 GPS units. Tail-Wheel control can be via X-Plane style commands or free-castoring, that makes this aircraft easy for first time Tail-Dragger aircraft learning. Other options include Strain Gauges, Steerable Tailwheel, a fully animated Pilot and Clipboard with a Weights & Balance menu.
     
    The Aircruisers unorthodox design does make it a challenge to fly, but I have had far worse and more difficult machines to cope with in the past. The helpers of course help, but once you master that huge powerful force forward, the "Shed" like design is oddly very nice and involving to fly. I usually despise Tail-Draggers, but loved the Aircruiser quite a lot, no, a really lot more. The quality performance and well thought out physics, do bring the totally unique experience alive.
     
    Added was a significant update a few weeks after the initial release. This was v1.1, and it included aircraft "Floats", brass markers for the trims, carburettor heat knob and gauge, better sounds and better flight dynamics with improved pitch stability and rudder response. Also added for convenience was the Skunkcrafts Updater.
     
    It is certainly a huge credit to the skills of the developer of what they have delivered here, certainly it is a very unique Simulation, but totally authentic as well, Secondly the release also shows off X-Plane 12's excellent dynamics and quality lighting. The Aircruiser 66-75 is very rare, but you can absorb yourself in this 1930's Golden Era of Aviation, and this aircraft is highly relatable to the same machine created over 90 Years ago....  Highly Recommended. 
    ________________
     

     
    The Aircruiser 66-75 v1.1 by Hangar 23 is now available from the X-Plane.OrgStore!... Here:
     
    Aircruiser 66-75 Price is US$29.95
     
    Requirements
    X-Plane 12 and X-Plane 11   (2 separate packages) Windows or Mac   (Linux not supported) 8 GB+ VRAM Recommended Current version: 1.1 (Feb 15th 2024)
    Download Size: 1.2 GB (each version)   Aircraft download is 1.18Gb, and unpacked, then installed in your X-Plane Aircraft folder 1.38Gb. Authorization on startup is required   Documents X-Plane Aircruiser Handbook.pdf The provided manual is excellent, a lot of detail, installation, setup and flying tips...  even Limitations and Operations.
      Designed by Hangar 23
    Support forum for the Aircruiser 66-75 ________________  Windows  - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD
    Software:   - Windows 11 Pro - X-Plane 12.09rc5 (This is a Release Candidate review).
    Plugins: Traffic Global - JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00
    Scenery or Aircraft
    - EGKA - Shoreham - Brighton City Airport by NKdesign (X-Plane.orgStore) US$15.00 ________________  
    Update Review by Stephen Dutton
    12th March 2024
    Copyright©2024: X-Plane Reviews
     
    (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
     

     
  2. Like
    Blueb reacted to Marcio N Amaral in Scenery Review: Grand Arctic Scenery XP12 by HSimulators   
    Hello guys! Thank you for helping to promote the scenarios. It's hard work, and I am working on improvements for the free update.
  3. Like
    Blueb reacted to copacetic4 in Behind the Screen : November 2023   
    Well, that was depressing - I didn’t realize I was enjoying such a flawed simulator this year.  Is XP12 perfect? No.  Has it continually improved since release? Yes.  Does Laminar have a plan to keep improving it and address the areas that many users are still unhappy with?  Yes.
     
    This is an extremely complex piece of software that simulates one of the most complex human activities.  We use it for entertainment and training.  It costs us what?  Well under $100 with free updates between major versions.   Yet we’re supposed to be despondent due to an imperfect but wholly functional, and improving, product?
     
    I love your reviews Stephen, but it may be time for a break from reviews for a while. 
  4. Thanks
    Blueb reacted to Stephen in Aircraft Update Review : McDonnell Douglas MD-11 v1.08 by Rotate   
    Aircraft Update Review : McDonnell Douglas MD-11 v1.08 by Rotate
     
    Up at dawn, time to load the freight...  we are at Leipzig/Halle Airport EDDP, for a routine flight to the UPS Facility at Philadelphia, US, KPHL.
     
    God it's a "Beast" of an aircraft is the McDonnell Douglas MD-11, but Airhaulers love the "Diva". Those ghost pilots that fly at night, unseen, unknown, but moving tons cargo around the world for your livelihoods or self-indulgence.
     

     
    You start the centre positioned No.2 Engine first to provide power and air-conditioning and other AUX systems, then pushback on time (note the BetterPushback issues have now already been fixed). Then once out of the bay, you can start the other two General Electric CF6-80C2D1F high-bypass turbofan engines, rated at 52,200–61,960 lbf each.
     

     
    I'm not going to shy away from the reality. To get the DC-11 ready for flight, there is a lot of filling in of data and setting up of the route. There are a few helpers in the menu. But overall the developers approach is to make this aircraft as realistic and authentic as possible, that is good obviously, but a bit daunting if you are not familiar with these machines and their complex Honeywell Pegasus MCDUs. The instrument panel and DU (Display Units) have very different layouts as well, their operation are also different from most other flightdecks. But these aspects are also the attraction to the aircraft, you are flying and mastering something entirely different, that is also the seduction of the MD-11.
     

     
    The focus with the release of X-Plane 12 in it's beta phase...  a Version 1.05 beta (September 26th 2022) allowed the Rotate MD-11 aircraft to function in the new Simulator version. Then two updates followed with v1.05 (October) and v1.06 (December) and both were focused on X-Plane 12. The final DC-11 (official) release for X-Plane 12 was the v1.07 update in March 2023.
     
    For a comprehensive look at the aircraft, here is the X-PlaneReviews review of the XP11 release; Aircraft Review : McDonnell Douglas MD-11 by Rotate
     
    If you are a "hauler" in these "Heavy, Heavy" aircraft, say a B744F, B748F and the MD-11F. The critical phase is just after you leave the runway. You need to climb (obviously), but with a really heavy aircraft, brimmed with Cargo and Fuel, then you need to coax the machine into the air, then have the skill to keep it up there. You pitch is critical, too low and you lose height, too high and you stall, badly and literally fall out of the sky. Between the two barrier zones to a perfect climb-out, and you usually do it very carefully and slowly... the MD-11 is totally like this.
     

     
    Once settled in at 12,000ft you, then have more flexibility on setting speed (usually for me around 295 knts) and an altitude climb-rate (1800 fpm), down to 1,000 fpm from 26,000 ft up. You would never go to full cruise altitude either, usually say 32,000 ft for the first 500 nm to burn off weight in fuel, then step up 2,000 ft at a time to your cruise altitude, here 36,000 ft, you step the speed as well, from m.76, to the cruise speed of m.82. I learnt these tricks/skills well on an underpowered Boeing 747-200 F with 46,300–54,750 lbf of thrust, compared to the 66,500 lbf thrust of the latest GEnx-2B67 on the B748F and the 52,200–61,960 lbf available here.
     
    Before we get into the update... In doing reviews you are also evaluating the current situation of the Simulator as well (X-Plane12.07r1), and how it interacts with your flying. There has been a lot of development around the weather this year in X-Plane 12 by Laminar Research, some changes were really bad very early in the year, but with lots of improvements of reading GRIB forecasts which are based on the National Weather Service (NOAA) since v12.06.
     
    But real world simulations are getting very good in X-Plane...  Here I was approaching the European Coast and the weather was getting quite nasty. Navigraph have this year added a weather component to there excellent "Charts" application, and you can see the weather topographic mappings, look outside of the MD-11 and I have the same precipitation areas around me... I needed to climb, but instead stayed at FL320 until I saw a gap (shown on the topographic) to finally climb from below the weather, to be on the top (FL360)...  I was impressed with not only the exact weather mirrored on the Application, to the weather situation around me, and to take advantage of that...  it also shows how X-Plane in this area is also getting very close to the real weather situations we crave, admittedly there is still more development needed for upper level Cirrus clouds and shading, but the improvements are there to not only see, but to feel as well.
     
     
     
    Update v1.08
    But to the business at hand, the latest v1.08 update. There is again a massive list of fixed and improved areas on the XP12 MD-11 in this update, but first three new additions.
     
    Added into the MD-11 cockpit are two EFB (Electronic Flight Bags) or tablets, one positioned each side of the pilots. 
     

     
    You can adjust the angle of the EFBs to your personal preference, but you can't hide them.
     

     
    Power switch is lower left corner.
     

     
    There are eleven tabs to select from. They are an amalgamation of the MD-11 Menu, and AviTab (Plugin Required). The list is HOME, W&B, GndOps, Fails, Man, Chart, Maps, Apts, Rtes, Data and Notes.
     
    All HOME (Options), W&B (Weight & Balance), GndOps (Ground Operations) and Fails (Failures) are all direct copies of the same Menu items found in the Plugins/Rotate MD-11/Aircraft Menu.
     

     

     
    Basically they have been repositioned there in the tablets for convenience. The other seven tabs are the various AviTab tools set differently.
     
    MAN - Manuals
    This MAN option allows you to navigate folders to find Manuals or Tutorials within the Computer's file system, here set in Windows, and you can display pdfs on the screen. Its clever, handy but pretty basic as well.
     

     
    Chart - AviTab
    You can insert a navigation chart or other document in the AviTab "charts" folder (X-Plane 12/Resources/plugins/AviTab/charts) and have it appear in this tab...   It will also show pdf files, ideal for loading in SimBrief "Briefings".  Basically this option would be used if you didn't have a Navigraph or another chart account.
     

     
    Maps
    Is the standard AviTab Maps function.
     

     
    Apts - Airports
    Airports is the standard AviTab function to get airport information, and if you have a Navigraph account and access to their charts
     

     
    Rtes - Routes
    This is the "Route Wizard", A tool to compute a route for you to enter into the aircraft's FMC. First you add in your Departure Airport, then your Arrival Airport and it creates a route for you.
     

     
    Data
    You use the "Data" tab to authorise accounts, like for Navigraph and ChartFox, both charts can be viewed in the "Apts" (Airports) tab when selected.
     

     
    Notes
    This tab uses the AviTab "Notes" Function...  Honestly I can't get it to work, there are no manual notes and the Rotate Developer doesn't know either...  but the idea is to write down notes, but how do you save them? it is supposed to be for VR (Virtual Reality) users.
     

     
    Basically most users are very familiar with AviTab functions and tools, and having it built in well in here is obviously a bonus to the pilot.
     
    The last two additions to the v1.08 update, are both for those long distance pilots that move away from the Simulation. There are two options now to pause the Simulator...  the first is to pause the Simulation on a "Master" warning alert, the second is again to pause the Simulation before T/D or Top of Descent.
     

     
    The list is split between "Improved" Areas and general fixes. In the improved focus there has been a lot of attention on the ATS (AutoThrottle) in the Servos behavior, in the AFS (AutoFlight) there is improved altitude capture, speed on pitch guidance and better system stability and accuracy. There is also better lateral guidance for NAV/VOR/LOC modes and improved LAND sequence guidance.
     
    For engines there is better N1 trim and thrust precision and and engine drag near idle. The VNAV descent prediction has also had attention, drag prediction for non-clean configurations, and finally there are Improved navigation lights textures.
     

     
    I do really like the nice strobe effect, not one strobe but two in sequence.
     
    Rotate is always very serious about bugs, finding those nasties in there and improving the Simulation. The list here is very long...  35 fixes that covers a lot of areas, we can't cover every item here, that would drive you nuts, so we will take only the important items.
     
    There was a radio bug in the VHF2 Channel, in that it could receive but not transmit, it's been fixed. Flight Mode Annunciations (FMA) has had attention as well, in Altitude mode blinking during capture, and PROF TO (Profile) reading during climb. There was some negative values in the altimeter tapes that have been corrected, a bug in the PERF page predictions. Finally a rounding error in some lat/lon readings (mostly Oceanic coords).
     
     There was a discrepancy between active and shown flight plans... fixed. And a problem with direct bearing to AT/B restriction during descent calculation. Also speed used for flight path prediction below speed transition altitude was not working properly. speed tape logic has been refined, and a bug in Vspeeds boxes color codes has also been rectified.
     
    On hardware, there was a bug in the start lever sounds, and intermittent repose of TCA hardware handles, toe-brakes didn't work either without a joystick plugged in. The wingflex has also been refined a little better, and for XP11, the wingtip glass (floating) has also been fixed.
     
    My thoughts with the UPS flight are actually few, but worth noting. The LWR Cargo TEMP LO warning (yellow) is still (very) persistent, even though Rotate acknowledged the bug very early in the release phase. My other thoughts are with a lot of current classes of complex aircraft, as there is no SAVE feature for the aircraft. Using the default "Situation" save creates a not very realistic return to the cockpit, and a major reset to make the aircraft flyable again. So you are restricted to do a flight from block to block in one go to get a smooth Simulation. Biggest offender is the non-working ATS (AutoThrottle), that refuses to reset, and the gymnastics when you restart the Simulation... it can be reset to fly correctly, but you will need patience and skill to do so. My point is this is very long-haul flying, and sometimes for ten hours in the left seat, and sometimes you have to break up the simulation, of which you can't do here, it also hates the replay and the X8-X16 speed changes with the complexity... And I loath the ghost throttle simulation, there should be an option to hide the distracting animation.
     

     
    The rear rest cabin still has extremely low-res textures and a non-working toilet, and the cargo loading feature, while well done, is still restricted to 4 containers that disappear when loaded, you need better here if you are a serious cargo hauler.
     

     
    MD-11 is a seriously nice machine in the air, one of the best simulations in X-Plane 12. Internally it is a very nice environment, again with the long hours you have to have change from the left seat options, like a snooze in the third rear seat, or a break in the rear...
     

     
    Great to watch is the excellent fuel management system on the MD-11. It has a fully automatic aircraft balance system, like Concorde it pumps fuel forward after takeoff to keep the CG (Centre of Gravity) within limits, shown upper left on the Fuel page display. 
     

     
    In flight the pumps are always switching on or off, you don't just have a Tail Tank, but an Auxiliary tank as well. All fuel tanks are simulated here, including the separate outboard and inboard wing compartments, 18 fuel pumps, 16 valves, 5 manifolds and the 4 fuel feed valves...  The full system is modeled for as a physical model for fuel flow and thermal behavior. There are also Automatic and manual modes.
     

     
    Quantity, pressure and temperature for each of the fuel tanks are computed separately. All this data is processed in the custom Fuel System Controller, where logic for most of the sub-systems have been written to simulate most of the system’s functions, including fuel scheduling, cross-feed, CG management, ballast fuel management, anti-ice re-circulation, tip transfer, fuel dump, and abnormal operation. Manual mode, failures and electrical dependencies are also simulated. It's altogether very authentic and realistic.
     

     
    Interesting on the MD-11, is that you can only set your departure Takeoff details, but not the Arrival/Approach settings. This is done as you reach your TOD (Top of Descent) phase by pressing the TO/APPR button. Then you set your Flap position and speeds. Secondary is setting your Arrival Radio Approach Frequency, here at Philadelphia, KPHL, Rwy 27L... the Freq is 109.30 IGLC, but you have to wait until it is available from the list to insert. So you insert the ILS Freq 109.30, then you are taken to selection page to select the correct frequency, here LK6 as it has just shown up on the list, selecting the correct frequency will then insert it into the ILS/CRS box, adding in the Course º degree and the ILS name "IGLC. This is a change in selecting from the list, instead of just earlier inserting the ILS Freq late into the the flight.
     

     
    I'm now over Pennsylvania, tracking into JIIMS4 STAR, but I had to make an adjustment to the flightplan with an extra way point VC177 to make a cleaner rounded turn to finals on Rwy 27L.
     

     
    Going into the final turn it's time to drop the gear! "Chunk, Clunk,Clunk" and its down and we are ready for landing.
     

     

     
    You press the upper large centre APPR/LAND button centre FGCP to ARM the approach phase (as noted this also arms only the LOC if you selected that option)
     
    If you have activated the ILS Frequency correctly it will show lower left in the PFD with the set Flap degree, you can also now set the APPR screen in the ECP, for better approaches. Notable is the auto selection of "Single" or "Dual" landing (Land) selections (green banner top right PFD) , it will flash the selection it will use then LOC it in.
     
    I'm sitting at 175 knts, but in reality the MD-11 is certainly a gut sort of aircraft in this phase like I found in the release review, the throttle response is very slow on resetting the speed, so you have to be ahead of the aircraft, sometimes by a long way, to get the right speed in the approach phase, same with the ILS landing phase in resetting the approach speed to the descent angle.
     

     
    Yes your always nervous, it's a tricky approach to get right, with a very heavy and fast aircraft rushing towards the ground. MD-11 as we were told, had the fastest VAPP of any civilian airliner. At MGLW (Maximum Gross Landing Weight), it was usually known to be landing at around 168kts.... and you are aware of that aspect and all that weight in the back.
     
    In landing again the MD-11 is very much like the Airbus, as there are landing modes, certainly the callouts are very good, with also "LAND and FLARE on the PFD...  I was however seriously again very impressed on how I could just pitch the nose up nicely in the flare to touch the main gear down first.
     

     
    I'm on the runway, so you activate everything you can, in reversers, airbrakes and stand on the toe-brakes to stop the momentum of a landing weight of 204,331 kg, thankfully it all works...
     

     
    ...  it's a real substantial beast of an aircraft, so mastering it with skill and ambition is certainly a challenge, but also the MD-11 gives back huge rewards for all the effort...
     

     
    If we are looking at substantial Simulations then the Rotate MD-11 is certainly it, not for the absolute novice, but certainly for the brigade of users that have Long-Haul experience and want a "Heavy, heavy" aircraft to master.
     

     
    Summary
    The release of X-Plane 12 in it's beta phase...  a Version 1.05 beta (September 26th 2022) allowed the Rotate MD-11 aircraft to function in the new Simulator version. Then two updates followed with v1.05 (October) and v1.06 (December) and both were focused on X-Plane 12. The final DC-11 (official) release for X-Plane 12 was the v1.07 update in March 2023.
     
    This is the v1.08, with three new features and along with another long bug and fix update. Biggest addition is two EFB (Electronic Flight Bags) or tablets for each pilot. They have four tabs that mirror the Rotate MD11 Menu in... HOME, W&B (Weight & Balance), GndOps, Fails (Failures), the rest of the; Man, Chart, Maps, Apts, Rtes, Data and Notes tabs are the same tools as in the AviTab plugin (required). Other additions are to pause the Simulation on a "Master" warning alert, and the second is again to pause the Simulation before T/D or Top of Descent.
     
    There are thirteen improvements to systems, and 35 fixes that covers again systems and hardware intergration, it is a very extensive upgrade here in the fix department. But there are still a few areas that need attention, a warning light for the cargo hold is beyond annoying, the ghost throttle that requires a hide option is another annoyance. But most of all the MD11 needs a SAVE option as it is difficult (not impossible) to restart mid-flight, or if you have a CTD, it is simply too complex to rebuild the systems to work effectively from the standard X-Plane Situation save.
     
    I will again state if you are going to think if purchasing the aircraft,  is it just too far in it's complexity? I'm not going to waver from the fact that this is noted as a "Study" aircraft, yes you need a skills and heavy aircraft skills to fly it. But once you understand the systems and preferences, it is simply a brilliant aircraft to fly, and a very good simulation, if one of the best currently in X-Plane 12 (also available for XP11).
     
    Being a Long Hauler, I obviously really love this aircraft, and with any chance or free time it is one of my prime simulations to fly. The images in this review highlight the the brilliant look and feel the aircraft delivers in X-Plane 12, a top simulation, and a prime simulation for those serious Cargo Jockeys out there.
    _____________________
     

     
    Yes! the McDonnell Douglas MD-11 v1.08 by Rotate is currently available from the X-Plane.Org Store here :

    Rotate MD-11
    Price is US$83.95
     
    The feature list is HUGE, so if you want to read it, then open the text file.
    Feature List.txt 5.83 kB · 147 downloads
    Requirements X-Plane 12 or X-Plane 11 Windows 8 or  Mac OSX 10.12 or newer (using Rosetta for ARM Processors) , Linux Ubuntu 64b 18.04 or newer 4 GB VRAM Minimum - 8 GB+ VRAM recommended Current version: 1.08 (November 1st 2023)   You can download this updated v3.0 Updater free here; SkunkCrafts Updater Standalone client
     
    AviTab Plugin is now required.
     
    Navigraph
    Subscription only on a monthly or yearly basis or EUR 9.05 / mo or EUR 81.64 / year
     
    Designed by Rotate
    Support Forum at X-Plane.org or http://support.rotatesim.com/
     
    Full v1.08 changelog is here;
     
    Changelog v1.08.txt
    _____________________
      Aircraft Review by Stephen Dutton
    7th November 2023
    Copyright©2023: X-Plane Reviews
     
    Review System Specifications: 
    Windows  - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD
    Software:   - Windows 11 Pro - X-Plane Version 12.07r1 (This is a release review).
    Plugins: JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 : Skunkcrafts Updater
     
    Scenery or Aircraft
    - EDDP - Leipzig/Halle International Airport by JustSim/Digital Design (X-Plane.OrgStore) - US$20.00
    - KPHL - Philadelphia International Airport by StarSim (X-Plane.OrgStore) - US$24.00 - Full review available here: Scenery Review : KPHL - Philadelphia International Airport by StarSim
     
    (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
     

     
  5. Like
    Blueb reacted to Stephen in Aircraft Update Review : Embraer E-Jets Family v1.03 by X-Crafts   
    Aircraft Update Review : Embraer E-Jets Family v1.03 by X-Crafts
     
    Earlier this year was one of the year's most significant new aircraft releases for the X-Plane 12 Simulator. The E-Jet Family series of aircraft was released on the 10th May 2023 by X-Crafts, and obviously X-PlaneReviews did the full release review on the aircraft: Aircraft Review : E-Jets Family by X-Crafts.
     
    Release reviews are always an early in-depth look of the aircraft. Detailing the Features, Systems, Instruments and focusing on the Modeling, look and feel of the release. In this case it was a long review, because there are five different variants of the E-Jet family, four in E 170 - E 175 - E 190 - E 195 as they all were part of the release package, the fifth is the still to be released E 190 Lineage Business Jet.
     
    So it is always interesting to come back to the aircraft a few months after the initial review, to not only see the updates (fixes) on the package, but also have another perspective on the aircraft after a period of flying the machine and absorbing it's features. These update reviews are not a totally in-depth review like a few months ago, but to pick out the highlights and changes since that original release.
     
    The new E-Jet Family from Embraer in Brazil, was not the first Embraers from X-Crafts, first was the E 175 LR: Aircraft Review : Embraer E 195 LR by X-Crafts, which came into X-Plane 10 in August 2014, with then later the smaller E 175 on December 5, 2015.
     
    The difference with the 2023 release in that it was a completely different remodeling and systems redesign for X-Plane 12, and nothing on the earlier E-Jet aircraft was passed over to the new, the E-Jets also came with a significant price increase. But I found with the extremely high quality and huge feature list, it did also certainly realign the product to this new price point level, in some ways it is a remarkable achievement for X-Crafts on what they delivered.
     
    Since the release there has been three updates, v1.01 (19th May), v1.02 (26th June) and this latest update to v1.03 (October 3rd). The first v1.01 update was a reaction to release, to fix immediate bugs and issues. v1.02 was a more in-depth revision focusing on System Improvements, PFD (Primary Flight Display), MFD (MultiFunctional Display) fixes and sounds. Which brings us to the latest v1.03. This update is what you could call a mature update. All updates can be done via the excellent new Skunkcrafts Updater...  and first impressions back in the E-Jet cockpit support that feeling.
     
    Those first impressions are simply "Wow", it really is superbly created. The detail and quality really does jump out at you. Remember this is really the first X-Plane 12 aircraft (in this category), created and designed specifically for the X-Plane 12 version and it's new lighting effects.
     
    And the E-Jet certainly has that extremely look and realistic feel...
     

     
    In the release review I flew the E-195, this aircraft is the E-190, slightly shorter (36.25 m (118 ft 11 in), less passengers, but comes with a longer range in 2,450 nmi (4,537 km; 2,820 mi) and by flying an extra 150 nm. It is still a huge cabin...   galleys are small, but extremely well done.
     

     
    The cockpit is stunning as well, the detail is even overwhelming, even though I know it in complete detail from May.
     

     
    And you can slip yourself into the pilot's seat and adjust it forward.
     

     
    The E-Family uses the Honeywell Primus "Epic", Electronic Flight Instrument System (EFIS) glass cockpit...
     

     
    I really don't have a lot of negative comments with X-Crafts E-Jet Family, but there are two, or really one that can absorb the second one.
     
    The custom "Authentic" FMS is very good, yes authentic. But it is very long-winded to programme, not just the actual route, but there is a lot of performance and data to feed in. But there are helpers...   On the EFB there are three pages covering Weight & Balance, Takeoff Perf and Landing Perf.
     
    You can import the Flight data from SimBrief (Simbrief ID Required), and it fills out your loadsheet, you can then use this data to "Load (the) Plane"...  but it won't insert your route? The quickest way is to use the X-Plane 12 FMS flightplan (you can use the SimBrief Downloader App to insert the file in the X-Plane FMS plans folder). Then load in the route as a CO ROUTE
     

     
    You still have to insert your Departure and Arrival procedures, to complete the route detail.
     

     
    Again on the EFB, you can create the "TakeOff" and "Landing" performance data. You then have to fill in the Wind, (Airport) Temperature and Baro QNH.
     

     
    When computed, you can send the data directly to the FMS, via the upper right link. It is hard to find, but to set these Takeoff and Landing speeds you then have to go to the ACARS MAIN MENU, under NAV-INDEX/DATALINK.
     

     
    But it does not set other crucial data...   one of the big annoying diversions is caused by setting the TO-CG (TakeOff - Centre of Gravity). The TO-CG is shown on TAKEOFF INIT page 2, but it won't accept the TO-CG %, as you would usually program in the Trim on the TAKEOFF page.
     

     
    The TO-CG is actually set on the PERFORMANCE INIT-KG page 2, then  it fills in the TAKEOFF INIT (page 2) setting...  it also then sets the "PITCH TRIM" and "TO PITCH", both slots you usually do manually, here it is automatic.
     

     
    Another diversion is to set the Takeoff flap setting. Here it is set to FLAPS 2, to change the Flap setting you go to the TO INIT lower left LK6
     

     
    Select Page 2 and the Flap selection is the first row RK1...  OR  Then select your Flap Setting 1, 2, or 4 and the "ACT" is the active flap setting, when done press RETURN. The Flap setting change is now done on the TAKEOFF main page. 
     

     
    More data also has to be filled out on TAKEOFF INIT, this time page 1. WIND is required RK3... 
     

     
    Another one...  back to the PERFORMANCE INIT-KG Page 2, to fill in ISA DEV, ZFW, CRZ ALT (Altitude) and CRZ WINDS.
     

     
    Get it all right and your FMS active FLT PLAN lights up with SPEED and ALTITUDE data.
     

     
    Don't get me wrong, it is a brilliantly deep FMS system, really well done. Once you get skilled at the way you programme in the data, you will be well pleased with the result... but what if you make a mistake, or your flight is tomorrow?
     
    That is the crunch...  you can't save all your set up hard work, shut down the Simulator, and it's all gone. So it becomes a use it or lose it situation, and it's a lot of (programming) work to lose, and it's time consuming to reprogramme everything back in ready again.
     
    Developer note- "Use the ICAO code instead of the identifier to search for airports. This should fix some airports not being found on the EFB, If this still happens to you, then quit X-Plane, then navigate to …\X-Plane\Output\caches\xcrafts, and delete the airports.db folder. It will be recreated automatically next time you start X-Plane. And this should resolve the issue".
     
    Throttles
    Those lovely throttles have been troublesome since the original release of the XP12 E-Jet Family. Certainly if you have some add-on hardware throttles, like I do with the Saitek X56 Rhino. At first they didn't work at all with the Add-on set up, in v1.02 they did work, but both levers were locked together?
     
    In v1.03 the throttles now work independently of each other and realistically... nice!
     

     
    But there is something working even better here now, and clever as well. Reverse on these sort of "BETA" gate style throttle quadrants was always very tricky to get right with Add-on throttle systems Just try FlyJSims DASH Q4XP to see how hard it is to get it working realistically.
     
    But X-Crafts have come up with a novel solution here. Select your Reverser Mode as usual (Toggle thrust reversers), and the throttles drop back into the MIN REV gate, push up the throttle power and the throttles do the reverse action in going rearwards to MAX REV....
     

     
    So simple it makes you cry, but so easy to use. Do the reverse procedure to get back to IDLE position (pull back throttles then re-toggle the reversers)...   brilliant, you can play and marvel with them for hours. X-Crafts has also changed the Throttle Retarding detection method to prevent previous hardware issues, also the LNAV and VNAV will not disconnect if you disengage AP anymore.
     

     
    One of the biggest protestations with the release version was the aircraft would lift off the runway before the v2 (149 knts) + Rotate position was acquired.
     

     
    X-Crafts have done a lot of work on this issue, and it shows, at the rotation point it is now perfect, and at the correct vSpeed. Visually it's better as well with improved wingflex. So as the wings take the weight, they will bend now higher (or more realistically) on takeoff, but they don't flex in the replay mode, a Laminar bug it seems.
     
    I initially climb to 12,000ft, or 15,000ft if the airport is at a high altitude. Once there you switch off the seatbelt signs and clean up the lighting, and increase the speed (285 knts).
     

     
    Lately I have been comparing FLCH (Flight Change) modes in various reviews, to see how they stack up. I have in the past always been a procedures person and did all the Flight Level and Speed changes (Knts/Mach) myself. But decided to see how the E-Jet performed. And the results are impressive. Like noted I was at 12,000ft with an altitude change to FL320 (32,000ft), so I pressed the FLCH and watched it perform... 
     
    The (vertical) climb was originally set at 3,200 fpm, but quickly settled down to around 2,200 per minute, then over the climb it changed the pitch feet per minute from the 2,200 - 1800 - 1600 - 1200 - and going past FL300 it was down to 800, until reaching the correct altitude. Like I said, that was sensational in the sort of climb rates I would do manually. in v1.03 there has been some adjustments on the Mach number changeover point, now 31,000 ft. The VNAV has had a lot of attention as well...  first the VNAV not engaging if AP not selected before 1200ft AGL, thats now also been fixed...
     

     
    ...  TOC is now visible if it occurs within the SID. TOC is displayed currently based on average climb performance, but you may even reach FL before or after TOC, and that is normal. Route waypoint altitudes didn't before conform to climb or descent altitude profiles when before TOC or after TOD, thats been fixed as well. Finally the Vertical deviation bug does not stay in the middle during level offs during the descents, now it does...  all small stuff in being corrected, but it adds up to a very realistic Simulation.
     
    The results are impressive, in reality you can press the FLCH button (after selecting the new altitude), and climb professionally straight up to the new flight level in perfection, no dramas, with a Mach switch over on the ride up, in fact the E-Jet is fully automated, a one button press does the lot.
     
    I will note though that the FL change to my cruise altitude of FL340 (2,000ft) was a bit abrupt, 2,000 fpm was a bit excessive, but it quickly readjusted to 900 fpm, me I usually change levels around 500 fpm to 600 fpm in this category of aircraft over small altitude steps, don't want to scare the passengers.
     
    Glass transparency was debated, and the conclusion by X-Crafts was that the transparency was true to life and depends highly on the lighting conditions in the sim, that is a point... I don't think any developer can adjust cockpit lighting at the moment, it's still to transient.
     

     
    The one distraction I don't like is Throttle hunting. I have a nasty tailwind of 67 knots, so the Yokes are flickering and the Throttles are adjusting to the wind changes... but it's actually good here, not that abrupt movement, but a seemless casual adjustment as required, so the actions of the systems look and feel very realistic in flight.
     

     
    Is this E-Jet a great reflection on the state of X-Plane 12 currently, yes it is, very impressive.
     

     
    Rear Navigation lights are now white, from the earlier red, look nice as well...  all Navigation lights have been increased in intensity of around 20%, and so have the strobe lights.
     

     
    Cockpit lighting is excellent, but the Autopilot glareshield controls are still very hard to read in the daylight, fine at night...  but confusing in the day.
     
    FLCH descent felt a little excessive at 3,500 fpm? I would usually descend around 2,000 - 2500 fpm, only 3,000 fpm in an emergency, you press FLCH and the nose just goes DOWN...  I'll do it manually.
     

     
    Our arrival at Athens, love it when the gear unfolds.
     

     
    On the E190/E195 variants, the engine pylon was going through the flap when the flaps were extended, now that is fixed, another change is that the Flap extension times were reduced after evaluating some real-world videos. Flap 1 now takes 15 sec to extend instead of the earlier 20 seconds... so quicker.
     

     
    Manual approach flying is exceptional, you have to be impressed on how really good Flight Simulation is today, X-Plane dynamics give you an exceptional "hands on" feel for the aircraft in "Finals".
     

     
    Sound changes in v1.03 are all mostly focused on the landing contact...  with added cabin mains (gear) ground contact, cabin nosegear ground contact, a new cockpit mains ground contact and cockpit nose ground contact sounds. The "autobrake" warning is also now aural. One other aural adjustment was the rather noisy electric hydraulic pump by about 6dB, so the sound pitch is now down slightly.
     

     
    Obviously I couldn't wait to try out the better engine reverser actions, and they look and feel excellent, inside throttle actions and external.
     

     
    The E-Jet is fantastic and impressive as well.
     

    _________________
     
    Summary
    Released to great fanfare in May 2023, is the totally upgraded E-Jet Family Series from X-Crafts. The aircraft set new standards for regional aircraft design and detail, and was the first completely new X-Plane 12 focused release, plus it went up into the upper elite category price wise.
     
    Since the release there has been three updates, v1.01 (19th May), v1.02 (26th June) and this latest update to v1.03 (October 3rd). The first v1.01 update was a reaction to release, to fix immediate bugs and issues. v1.02 was a more in-depth revision focusing on System Improvements, here we focused on the largest update yet with v1.03. A full changelog is below.
     
    The update list is long, but highlights in v1.03 include fixes for the earlier troublesome Throttle quadrant for Add-on hardware. This time the fixes are done, and with the added extra of a well designed Thrust reverser action, for the same add-on throttle systems.
     
    Aircraft dynamics relating to early runway lifting has also been attended to, in fact TOC and TOD points have also had attention with a focus on the Knts/Mach transition, lots of attention for all VNAV, LNAV, PFD, MFD elements and the EFB Tablet are also well detailed, and goes a long way to giving the aircraft a maturity it deserves.
     
    A few physical changes are done as well, Navigation rear lights are now white, and all Nav lights are 20% brighter, modeling Engine Pylon into flaps is fixed, as is the flap speeds. Sounds are focused on Cockpit and Cabin runway contact speeds, and all have been revised.
     
    This is a very complex aircraft, programming the Primus "Epic" FMS, can take time, but gets far easier with familiarity and use, but X-Crafts have done a lot to make it a realistic, if also a provided a lot of "helper" options, but the important global save is still missing, and badly needed here. The non-connection to the Tiller is still there, and the lighting is still unusual in excellent night lighting, is in contradiction to the various daylight lighting being blanked out? an X-Plane 12 issue? The Guidance Panel is still impossible to see the daylight.
     
    Every thing here with the E Jet Family from X-crafts comes down to price. The packages are set in the high quality category, a single aircraft version is priced only US$5 lower than the category leader the FlyJSim Q4XP, the full five aircraft package (the lineage coming later) is US$134.95, yes that is expensive. For the past purchaser of the X-Plane 11 v2 version, the new purchase still gets a 15% discount, if you upgrade later to the full package, then there is a 50% discount, the best deal is 15% off the full package if you are a previous owner, still a big investment, and one that runs the full life of the X-Plane 12 version.
     
    The astounding quality of the aircraft here hits you in the face, this is "Top Notch" category that easily matches the class leader in FlyJSim's Q4XP Dash 8 aircraft, but there is also that "New Gen" feel of the quality and detail that gives this series the signal that it was created and designed for the future, or X-Plane 12, and it is not a conversion aircraft of the past. In truth this is the first (in this high-level category) of a pure X-Plane 12 release, and you see and feel it, and the E-Jets still feels very new and fresh after six months of release.
     
    The E-Jet Family from X-Crafts is a standard bearer in quality and systems for the X-Plane 12 Simulator. These revisions and consistent updates are moving the aircraft very quickly to a mature standard. It's a brilliant in-depth Simulation, that shows off X-Plane 12 to it's ultimate best.
    _____________________
     

     
    Yes! the Embraer E-Jets Family v1.03 by X-Crafts is currently available from the X-Plane.Org Store here :

    Embraer E-Jets by X-Crafts
    Price per single aircraft is US$74.95
     
    Embraer E170 by X-Crafts
     
    Embraer E175 by X-Crafts
     
    Embraer E190 by X-Crafts
     
    Embraer E190 by X-Crafts
     
    Purchasers of the E-Jet v2 (X-Plane 11) can get this new XP12 version with a 15% discount
     
    Embraer E-Jets Family by X-Crafts
    Price for the FULL E-Jet Package is US$134.95
    Includes every E-Type | E170 | E175 | E190 | E195 Plus + Linaeage 1000 Private jet (When Released)
    Purchasers of the E-Jet v2 (X-Plane 11) can get this new XP12 version package with a 15% discount
     
    Requirements X-Plane 12 or X-Plane 11 The first few initial updates will still be X-Plane 11 compatible, however, 6 months after the release, the X-Plane 11 version will be final and development will continue only on the X-Plane 12 version. Windows, MAC or Linux -  4 GB VRAM Minimum. 8 GB+ VRAM Recommended Current version: 1.03 (October 3rd 2023) Download via Skunkcraft Updater   Download (Package) installed is; 5.56GB. The AviTab plugin is also required to use this aircraft, and it is deposited in your X-Plane Plugins folder.  
    Designed by X-Crafts
    Support forum for XCrafts   
    Documentation
    There is excellent full coverage documentation and built in checklists, including;
    E-Jets Family by X-Crafts - User Manual  
    Changelog v1.01, v1.02 and v1.03
    Version Notes v1.0.3.txt
    _____________________
     
    Aircraft Review by Stephen Dutton
    28th October 2023
    Copyright©2023: X-Plane Reviews
     
    Review System Specifications: 
    Windows  - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD
    Software:   - Windows 11 Pro - X-Plane Version 12.07r1
    Plugins: JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 :
    Scenery or Aircraft
    - LIMC - Milano Malpensa XP by Aerosoft (X-Plane.OrgStore) - US$29.95
    - LGAV - FlyTampa - Athens (X-Plane.OrgStore) - US$28.00
     
    (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
     

  6. Thanks
    Blueb reacted to Stephen in Aircraft Release Review : DHC-2 Beaver DGS Series XP12 by Thranda Design   
    Aircraft Release Review : DHC-2 Beaver DGS Series XP12 by Thranda Design
     
    In aviation folklore, there are machines that have created an impact by their design alone, but a few have gone even higher into a sort of immortal status, Say Spitfire or DC-3, Concorde and even the Boeing 707. One other aircraft can also join this upper echelons of achievement, and that is the de Havilland Canada Type 2... also known as the "Beaver". Often referred to as the “best bush plane ever built”, the DHC-2 has been instrumental in developing and servicing far-reaching frontiers since it was first introduced in 1947.
     
    The DHC-2 Beaver is a single-engined, high-wing, propeller-driven, STOL aircraft that was developed by de Havilland Canada in 1946, and is known as a bush plane, in fact one of the most highly regarded bush aircraft ever created. There was 1,657 Beavers built between 1947–1967 and half are actually still flying and working hard. In fact you can currently buy a zero-time frame and just rebuild your current aircraft and keep the machine flying as long as you can service the radial engine and afford the new airframes...
     
    History
    de Havilland Canada hired Punch Dickins, a famous bush pilot, as Director of Sales who began an extensive program of collecting requests from other pilots and to understand what they needed in a new type of aircraft. Almost without variation, the pilots asked for tremendous extra power and STOL performance, in a design that could be easily fitted with wheels, skis or floats. When de Havilland engineers noted that this would result in poor cruise performance, one pilot replied "You only have to be faster than a dog sled". Other suggestions that seemingly sound mundane but important in the bush plane world; full-sized doors were installed on both sides of the aircraft so it could be easily loaded no matter which side of a dock it tied up on. The large doors (known as Alaska doors) were also made wide enough to allow for a 45 Imperial gallon drum to be rolled directly up and into the aircraft.
     
    On September 17, 1946, de Havilland officially put together a design team consisting of Fred Buller, Dick Hiscocks, Jim Houston and W. Jakimiuk, led by Phil Garratt. The new aircraft was designed to be all-metal in using "steel from the engine to the firewall, heavy aluminum truss frames with panels and doors throughout the front seat area, lighter trusses toward the rear and all monocoque construction aft". At the time de Havilland Canada was still a British-owned company and there were plans to fit the evolving design with a British engine. This limited power, so the wing area was greatly increased in order to maintain STOL performance. When Pratt & Whitney Canada offered to supply war-surplus 450 hp (340 kW) Wasp Jr engines at a low price, the aircraft ended up with extra power as well as the original long wing. The result was unbeatable STOL performance for an aircraft of its size.
     
    it was decided that the new bush plane was much like the hard-working beaver and so as many aircraft at the time were named after animals, the aircraft was designated after this industrious animal. The first flight of the DHC-2 Beaver was in Downsview, Ontario by Second World War flying ace Russell Bannock on August 16, 1947. The first production aircraft was delivered to the Ontario Department of Lands and Forests, a design partner, in April 1948.
     
    The Beaver was designed for flight in rugged and remote areas of the world. Its short takeoff and landing capability made it ideal for areas normally only accessible only by canoe or foot. Because it often flies to remote locations, often in cold climates, its oil reservoir filler is located in the cockpit and the oil can be filled in flight. A series of upgrades to the basic design were incorporated. One major customer introduced the use of flat steps replacing the earlier tubes, a feature that is now almost universal. In 1987, the Canadian Engineering Centennial Board named the DHC-2 one of the top ten Canadian engineering achievements of the 20th century.
     
    The current ownership of the certificates and tooling gives Viking Air of Victoria, Canada the exclusive right to manufacture new Beavers. Viking now sells a remanufactured and rebuilt DHC-2T Turbo Beaver upgraded with a Pratt & Whitney Canada PT6A-34 680 hp (507 kW) turboprop engine. With a maximum gross takeoff weight increased to 6,000 lb (2,700 kg) it can carry 2,450 lb (1,110 kg) of freight. However, Viking Turbo Beavers are only rebuilt from existing air frames, and are not new-builds, unlike Viking's own DHC-6 Series 400 Twin Otter, which is manufactured from a completely new airframe. (wikipeida)
     
    Performance - Maximum speed: 158 mph (255 km/h) - Cruise speed: 143 mph (230 km/h) - Range: 455 miles (732 km) - Service ceiling: 18,000 ft (5,486 m) - Rate of climb: 1,020 ft/min (5.2 m/s)
     
    Thranda Design
    This is the second Beaver for X-Plane by Thranda Design, their first release was the X-Plane 11 version released in November 2020, and this is the totally revised aircraft for X-Plane 12. Current users of the earlier Thranda XP11 Beaver can also get 30% off this new XP12 version of the DHC-2 Beaver. The older XP11 version is still also currently available, if you want to fly the aircraft in X-Plane 11
     
    This version is the Beaver that incorporates the "Holmes Extended Engine Mount", which moves the 917lbs engine forward by almost 10 inches. This modification then moves the center of gravity of the plane forward, and in then allowing additional loads to be carried in the back without exceeding the aft CG limit.
     
    First impressions are quite impressive. This is now also X-Plane 12, so you also get that huge photographic realism from the aircraft as well with the X-Plane 12 lighting and effects.
     

     
    In features and detail, there is is not that much difference outward between the two XP12 and XP11 versions, on the surface they are quite the same aircraft package. It is in the hidden areas, like textures (more soon), lighting, aircraft dynamics, aircraft performance, aircraft flight models is in were they differ. One significant difference is that the extra Floats and Amphibious floats variant is already included in this XP12 package, were as with the original version release they came a short few months awhile after, you also get a canoe as well!
     
    Thranda quality is extreme in detail and fittings. As noted the new XP12 Beaver comes with 8K textures, a huge pixel area 7680 x 4320. Just because it is 8K doesn't mean that you need a 8Gb Graphic Card to run them. 4 Gb VRAM is still recommended as Minimum. And 8 Gb+ VRAM is however recommended as normal. But like with the earlier Thranda releases, they had more than one 4K texture size, sometimes two 4K textures to fill in the same 8K area. So in reality you are only using the 8K to fill the same gap of the two 4K set of textures before. So Graphic Card size is not the issue, if you can run your current Thranda aircraft with your current graphic card size, then the DHC-2 will be exactly the same, in fact even a bit more efficient in that it only has to load in only the one texture sheet, rather than the load of old 2(K)or 4(K) texture sheets.
     
    As a classic Beaver, you won't get any better in modeling and design than this one, there was the original X-Plane Beaver from SoulMade Simulations DHC-2 version a few years back, that aircraft is a pure DHC-2, but without any updates, certainly no upgrade to X-Plane 12, the SMS DHC-2 is now quite dated and in the past. 
     
    The detailing is exceptional, the mapping of the precision of the rivets are simply excellent, and I love the gap in the cowling, actually done twice with the Holmes extended engine mount if you look closely. The Pratt & Whitney R-985 Wasp Junior engine, is rated at 450 BHP at sea level. This is an air-cooled, carburetted, 9-Cylinder radial engine, incorporating dual magnetos and an engine-driven single-stage supercharger. And the engine detail really jumps out at you with the coloured inner components, that aspect should not work on such an old aircraft, but it simply looks brilliant here...
     

     
    Undercarriage is basic, but again very well done in total authentic detail, the DHC-2 is a taildragger, so there is only a small loose swivel wheel at the rear.
     
    Notable in the detail are the excellent double metal plate reinforce plates, they are all over the fuselage and they all make the aircraft very authentic.
     

     
    They are beautifully done, and shows the high craftmanship of the aircraft. Rear Rudder, Elevator control surfaces reinforce work is also top notch.
     

     
    Wing shape and camber is perfect, again you have a highly realistic wing, realistically modeled and designed with all the correct rivets.
     

     
    Oddly the aileron goes only about 3º up, but 8º down, note the full barn door flap deflection of 58º, mostly used for slow water landings.
     
    There is the debate if X-Plane 12 surfaces are too "shiny, shiny". The X-Plane 11 surfaces were certainly in the opposite of being very flat, but it also bought out the intimate detail, here, or for all current Thranda Aircraft, is that every surface is shiny, reflective....  I'm not sure if I am a total fan of this look. In one aspect aircraft certainly looks realistic in X-Plane 12, but in other ways they just don't, as the shininess can hide a lot of the wear detail that presented well on the older XP11 version of Thranda's Beaver.
     
    Glass is superb, thick where it counts (windscreen), with a mottled/scratch wear in the glass. All glass is a heavy green tint, and "Bubble" windows is an option on the passenger doors. Reflections can also be turned off.
     

     
    There are four forward doors, Two for the pilots, and two behind for the front row passengers (note the right side door has no external handle, and can only be opened outside via a hotspot). Rear are two separate large upward opening "Alaska" doors. Space inside was created to be wide enough to allow for a 44 Imperial gallon drum to be rolled up into the aircraft.
     

     
    There are four passenger seats, and one large rear bench seat in the rear, all seats are beautifully done in blue canvas, with metal legs and rear plate supports. All of the five Passenger seats backs can be folded forward.
     

     
    You can take one or all five seats out, to create a huge cargo space. This space can then be filled with cargo, including cases, crates and (small oil drums), cargo is also put in the small baggage area behind the restriction net (bench seat if installed). You can of course also mix the passengers with cargo...
     

     
    Cockpit
    You sit up there very high at the front of the machine...   Both the pilot seats are amazing, with their metal clamshell bucket rear design, and hardwearing blue patterned levi Jean look cushions.
     

     
    Both pilots windows can be opened, or positioned in any place, up or down... you can play with the small window air-vent as well.
     

     
    The Thranda Beaver cockpit is not like the antique cream version like on the SoulMade Solutions DHC-2, that is very much beloved by me as to it's reference to an early Beaver. But this version is very much a more relative version to most of the working Beavers out there and it is extremely well done. The SMS version had a single left side Yoke, but here you get the TwinBar Y double version that disappears if you press the base. The logo we all admire...  all in it's chrome and black plate glory "De Havilland" and in the right lighting conditions it just glows and shines like it has just been lovingly and newly polished. The cosmetic detail here is excellent, and you simply can't believe the intimate authentic detail all around you here.
     

     
    There are two choices of the famous throttle quadrant, the older original classic version with the Throttle Lever left, with in order Propeller lever and Mixture right...  or the more modern squared off version with the Throttle now centre, Prop left and Mixture right.
     

     
    Centre top are the magnificently large DHC-2 iconic Manifold Pressure and RPM gauges, and the mid-screen mounted whiskey compass.
     
    The pilot gets all the flying instruments in the form of the six standard flight instruments in the Airspeed, Artificial Horizon, Altitude, Turn/Slip Indicator, Heading Indicator and the Vertical Speed, left is the main fuel tank selector It has positions of OFF, FRONT, CENTRE, REAR.
     

     
    Top panel is the (very) hard too find "Avionics" switch, and the metal plate flaps indicator is a work of art.
     

     
    There is a sensational JOS. POLLACK CORP Ignition switch, ELT and the logo plated MaxDim panel lighting knobs lower left panel, the metal plate storage box opens as well, to revel the three faces of the Thranda Design team.
     

     
    Right side panel has the avionics and electrical panel...   There is an altitude selector top, then an S-Tec Fifty-Five x Autopilot, KX 155 NAV/COMM Radio (NAV 1/COM 1), Garmin GMA 340 Comm radio, and a Garmin GTX 325 Transponder lower...  it is to be noted that these items are the default set of avionics, but as we shall see, you can use more different units if you want to. To the far right is an OBS Course Deviation Indicator (CDI) - VOR NAV 2.
     

     
    Lower right panel is a fully active (Fuse) Circuit Breaker panel, with the relevant electrical switches set below for power and lighting (Avionics power switch is as noted is high up on the left side panel facia). Next to the Fuses is the AMP's gauge, and Suction Gauge, and below is a lovely PS radio volume panel.
     
    Like with the XP11 Thranda Beaver there are still the two basic panel selections, the iconic version we know so well, but also a flat metal grey facia version, with the fancy LED lights under the glareshield.
     

     
    Centre panel is a default X-Plane GNS 530, but it can be replaced with a Reality XP GTN 750 if you own the extra feature. Mid-Panel are the engine gauges, with the Oil temperature shown on the top of the gauge, oil pressure on the left, and fuel pressure on the right. Next right is the sublime gauges to indicate the quantity of fuel remaining in the three primary internal fuel tanks. From left to right these gauges indicate the Front tank, Rear tank, and Middle tank, and below is a CYL. (Cylinder) Temperature gauge, with a Hobbs hour meter.
     

     
    Three lower levers cover (LtoR) the carburetor heat control lever, the famous Fuel Wobble Pump Lever and the Fuel and Oil Emergency Shutoff Lever. To the right is the internal Oil filler (yellow cap). Detail again comes to the fore with the Manufacture's and Aircraft registration plates. The authenticity is simply mind-blowing and it keeps on coming with the ratcheting carb heat lever, the manually pumped flap system (with direction valve), and the primer system that are all faithfully modeled for maximum immersion.
     
    The fuel system is complicated, with three internal tanks Front (35 GAL/132 Lts), Centre (35 GAL/132 lts) and Rear (25 GAL/95 lts), two wing tanks (21.6 GAL/85 Lts each) and an optional Belly Fuel Tank (43.1 GAL/163 Lts)...  for a total of 181 GAL/685 Lts of fuel.
     

     
    The main internal tanks are controlled via the red switch upper left panel, the wing tip tanks via a red switch upper door left, and the belly tank via a handle under the instrument panel (Vacuum air pressure is required). On the roof are the manual Rudder and Elevator trim wheels and indicators. Lighting is two side spot lights and ceiling LED lights, note the roof mounted temperature gauge, both (green) blinds twist and turn into place.
     
    There are loads of pumps and levers on the Beaver, one is the pump handle for the flaps, down right of the pilot's seat and another is the engine primer pump on the left of the pilot's seat, the actions of both are really well done and authentic.
     

     
    You are probably now thinking "This Beaver is exactly the same as the X-Plane 11 version?". It is, nothing at all is different in here except for the Thranda team image in the storage box. But there is a difference though...  in the look and feel. Oddly it feels different in here with the X-Plane 12 lighting, far more grey and dark metal. The centre quadrant(s) are now all black, not the steel metal grey of before, so the aircraft feels more modern now than aged, it has also lost something from the organic feel of a Traditional Beaver in the process.
     
    Cabin Lighting
    You still get the post style instrument lighting, but the brightness (even when adjusted to full), is nothing as bright as the X-Plane 11 panel lighting? And the Avionics are too bright for the main instruments, thankfully you can tone them down a little.
     

     
    The grey metal panel facia, has those lovely LED lights, but the instrument lighting can barely be seen?
     

     
    A switch on the lighting panel (arrowed) will turn on all four forward cabin overhead lights...
     

     
    ...    oddly there is STILL no lighting in the cabin? But you can turn the roof LEDs right backwards to give some illumination, but a few rear lights in the cabin would be nice. Overall the lighting although the same, is actually worse?
     

     
    External lighting is also worse than in X-Plane 11. Basic lights and the landing lights have no flare or floor shine? Beacon on the roof and tail light. Navigation and a very bright strobe on the wings.
     

     
    Floats and Amphibious floats 
    In the X-Plane 12 package, the earlier extra Floats and Amphibious floats version are now included. Both variants can be found in the X-Plane "Configuration Menu", The Seaplane version is shown twice, under "General Aviation" and "Seaplane".
     

     

     
    Both the land (Amphibious) and standard Float design is excellent, all the usual Thranda Design quality detail, both the forward wheels, and rear rudder system, the four float supports are well intergrated into the Beaver fuselage, detail is first rate as well.
     

     
    Both Amphibious and Standard Floats are really well shaped and perform nicely on the water, and with the right amount of drag in the air.
     

     
    The wheeled floats do create more drag than the cleaner "Float", and it is noticeable (slightly) from the cockpit.
     

     
    Menu
    Thranda's Menus are very feature rich and highly detailed. There is a popout TAB under the arrow, that can be (mouse) scrolled to hide it, that is if you don't like these sort of items crowding your screen (I don't). The Menu system includes the "Dynamic Generation Series" or DGS, a Thranda speciality feature that takes full advantage of X-Plane's flexibility for in-sim, real-time modifications.
     

     
    As noted the "Menu" Tab (arrow) is far left middle of your screen, this will activate the Pop-Out Menu... The Menu has seven menu tabs in; GENERAL, LIVERY, WEIGHT/BAL, CAMERA, AUDIO/SLEW, PANEL and MISC (Miscellaneous). Basically it is the standard Thranda default menu.
     

     
    Menu - General
    The menu "General" sections covers quite a lot of options, the layout is highly detailed and very comprehensive.
     
    General menu selections cover; Engine Mode (Simplified/Realistic), Electric Tug, Window and Instrument Panel Reflections on/off, Startup Running on/off (sets aircraft to full running mode), External Belly Tank, Chocks and Brakes on/off, Steering (Simplified/Realistic).
     

     
    Three selections placed right cover group items, but any one item can be also accessed via "Click Spots" and can be individually selected or hidden via the aircraft graphic. "ALL COVERS" will select engine inlet/outlet covers and pitot covers, "ALL TIE-DOWNS" for rear fuselage and wing tie-downs and "ALL DOORS" for both the cockpit doors and the right side luggage door. All EXT - External Lights can be switched on and off as can the ALL INT - Internal lights. And finally "Radial Engine Animation". Static Items include Wheel chocks, wing pitot cover and that rugged heavy duty engine cover over the nose. The Engine cover can only be seen/hidden via the forward selection on the General-Menu page (arrowed).
     

     
    Engine Mode - Toggles the engine realism between "Realistic" and "Simplified". When this is set to "Realistic", the engine will require the correct amount of priming for it to start, depending on the engine's temperature. When the Engine Mode is set to "Simplified", it makes starting easier.
     
    Electric Tug can be used to move the aircraft around on the ground via your Throttle (Forwards/Backwards) and Rudder Yaw (Left/Right), brakes can be used as well.
     

     
    Startup Running on/off this switch will re-load the plane either cold and dark or with the engine running.
     
    EXT Belly Tank is really well done (note the filler pipe), too much weight? then remove it, but I like the extra range it adds.
     

     
    Steering Toggles between "Realistic" and "Simplified". In Simplified mode the tail wheel steers directly with the rudder, through a range of +- 30 degrees. In Realistic mode it functions as in the real aircraft, becoming free-castoring past +- 25 degrees of deflection.
     
    There is an exciting separate animated pop-up window that shows details of the Beaver's engine in operation.
    At the top of this pop-up is a graph that indicates whether the engine is properly primed for starting. A small indicator line moves horizontally along the bottom of the graph to indicate the current conditions. This graph is only active if the Engine Mode is set to Realistic.
     

     
    There are no pop-up checklists for the Beaver, usually set on the General page, but there is a basic set of checklists in the provided POH Documents.
     
    Menu - Liveries
    Second Menu option is "Liveries", there are two options here with the first being "PAINTED LIVERIES". There are altogether 10 liveries and one blank (DynamicLiveryResource) overall Eleven designs, and all the liveries are of extremely high quality and have creative flare with the package. I will note that seven liveries only loaded after I ran the Skunkscrafts Updater to v1.0.1.
     

     
    The X-Plane 11 Beaver is supplied with fourteen liveries, but there is now only eleven on the XP12 aircraft? with the DynamicLiveryResources being the currently selected "Dynamic" livery.
     


     
    Dynamic Liveries
    Not happy with any of those designs, then why not create your own!  With their earlier release of their Kodiak then Thranda also introduced a clever feature to design your own livery.This is done by switching from PAINTED LIVERIES to DYNAMIC LIVERIES top. I created this orange, black and grey for this review... 
     

     
    You have a menu to select on the right that can colour a certain part of the aircraft, like the Roof, Wing, Tail or Wing tips. Select which one you want, and then adjust the RGB colours for that area, it looks hard but you can easily design a very nice livery in about twenty minutes...
     

     
    You can also change the aircraft's registration number, or have original de Havilland logo on the tail.
     
    There are also four effects you can apply. The said "Dirt" and "Scratches", and also "Metal" and "Rough(ness)" this gives the aircraft a dirty rough appearance. So applying these Dirt and scratches on the airplane will make the surfaces rougher, this is giving you the full PBR control in creating stunning metallic liveries, or matte, sand-blasted look, and these aspects will also slightly affect the Beaver's drag, and therefore it's cruise speeds. With full dirt and scratches you can expect a loss of 2 to 3 mph of cruise speed. Cleaning the plane by setting both values back to 0 will give you a smoother and slightly faster plane.
     

     
    ...  when done you can then "APPLY" it to the aircraft. It was all quite easy to do.  Then the aircraft goes through a sort of transmogrifying process that takes around a minute and a half....
     

     
    ...   you can "SAVE" the livery, in that then the custom livery becomes the "DynamicLiveryResources" livery in the "Painted Liveries" selection. Altogether there are 29 optional Dynamic Liveries to change or use. New to the Dynamic Livery application is ERA options in "Modern' or "Classic"....  and of course personal taste is optional!
     
    In the Float/Amphibian menu, you can also colour in the float design to your own preferences, or to match the floats in with the same aircraft fuselage design, all the same livery options (29) are available here also.
     

     
    Menu - Weight/Bal
    The Beaver also has a great Weight and Balance menu.
     

     
    Lbs and Kgs which can be selected and changed via the toggle...  Lbs In Green, and Kgs in Blue.
     

     
    There is the weight selection of all the seats. The X option on each seat will toggle the seat off/on, or go from a Passenger to Cargo layout.
     

     
    Fuel (including the EXT Tank) can be added in and the amounts are then shown and are adjustable as well in the menu (above)... pilot, passengers and cargo can all be set for individual weights and all are selected via a scrollwheel...  and then all of the CofG (Centre of Gravity) parameters are all shown on two graphs, go too far or too heavy and the CofG goes red. When done you can Save the Configuration and then later re-load it, or press Load to add back in the set weights.
     
    Working out that right CofG balance here is critical, setting just inside the parameters is just not really good enough, as you need for the aircraft to be balanced in it's fuel and load weights, or you will have difficulty in flying the aircraft. So put too much (cargo) weight aft and you are tail heavy and unbalanced in the TakeOff, and in Flight.
     
    Menu - Camera
     

     
    There is a camera feature under the menu "Camera" selection. The left side of the panel is the "Walkaround" views, just pick the dot for the external viewpoint you want to see to rotate around the aircraft. To the right is the default views can be selected via a menu, or press the keypad to select the internal viewpoints. The FoV or "Field of View" is adjustable via a slider.
     

     
    Menu - Audio/Slew
    Sound can be adjusted via the Audio menu. There are seven slider selections with: Master, Aircraft External, Aircraft Internal, CoPilot, Radios, Environmental and User Interface. One other sound setting is on the Flap panel...  As noted, on the right and left of the panel you get the audio simulation of an active noise canceling headset, which is seen as wearing a headset. Sound quality is beyond excellent as it is a built in audio mixer, so you can individually control the audio channels in real-time and you can adjust the volumes while hearing them play.
     

     
    Slew mode allows you to manually move the aircraft around in a disconnected X-Plane space. It functions by temporarily overriding the various aerodynamic and physical forces on the X-Plane settings, it is to allow the user to reposition the plane as desired. This feature is however highly touchy and it is used mostly only really with the Amphibian/Floats option in docking the aircraft to say a pier or marina.
     

     
    Menu - PANEL
    The sixth "PANEL" Tab option allows you to adjust or change the instruments and dials.
     

     
    Scroll the "PANEL BACKGROUND" number to see all the four background preset layouts.
     

     
    Scroll the "Panel Preset" number to see all the five preset layouts. The layouts can include both GNS 430/530 and the Aspen EFD. Even the The Reality XP GTN 750/650 Touch can also be installed if you have that external option, as the 3d bezels are provided.
     


     
    Aspen EFD is a self-contained multifunction digital display that is divided into a Primary Flight Display (PFD) in the top half, and an Electric Horizontal Situation Indicator (EHSI) in the lower half. As EDF 1000 systems go it is not as highly featured with the GPSS, MAP,  360 and Menu functions all not simulated...  all the lower NAV1/NAV2/GPS selections are however available, as is the TPS (Tapes) see/hide option with the MIN (Minimums) selectable as well. and the PFD can be reversed with the EHSI. The EFD 1000 PFD pops-out for convenience.
     

     
    Customising the panel to your own personal layout is just as easy. Just select the "3D EDIT PANEL MODE" (arrowed) that gives you access to all of the 54 individual instruments and avionic units...  There some great options including the Aspen EFD 1000, S-TEC 55x Autopilot, Angle of Attack gauge and so on...
     

     
    For those that find instruments are not to their liking, in say, "I wish I could move that altitude meter just a bit more to the left", then here you can simply adjust and move that particular instrument, or even swap the instruments around the panel to your liking. Here I have added in a Reality XP GTN 650 Touch instrument on the right lower panel...  You can even adjust the brightness of the instrument.
     

     
    When you can "ADD" (or Duplicate) in a new "Preset", and then "SAVE" that new layout Preset (Preset /6). So basically you can start off with a completely blank instrument panel and then create your own unique or personal instrument layout if you have the time and patience...  and you can have up to or save 14 different instrument layouts. It is however very important to restart X-Plane to lock in the new instrumentation layout before flying.
     
    Panel features include; S-Tec Fifty Five autopilot and the noted Aspen EFD 1000, KR 87 ADF Radio, Garmin GMA 340, Garmin GTX325 Mode C Transponder and the usual GNS 430/530 PS/Nav/Comm units. Both GNS units also require their own installation area. Note that the "Gear Advisory" Panel for the Amphibious/Float version can also be added to the custom panel.
     

     
    The DGS system is certainly very clever and versatile, but a small annoyance is that to get your custom livery or panel, you have to reset everything, every time you fly? Yes the custom SAVES are all there ready for you, but not when you start/load the aircraft.
     
    Menu - MISC
    The Misc (Miscellaneous) page has four panels that cover External; Skis, Wheels; Tires and Mud Flaps.  Internal; Windows options and Throttle Quadrant options. Notably missing here is the usual "DynaFeel" Feature.
     

     
    High quality designed "Skis" are available for the Beaver...  
     

     
    Tyres can be changed from "Regular" size, to the larger "Tundra" style. The larger tundra tyres however won't work with the skis...
     

     
    On the rear you can have "Mud Flaps", and here they work with either the regular or tundra tyre options.
     
    Rear Door windows can be "Flat" or "Bubble"...
     

     
    Throttle Quadrant options include; OLD (classic) or NEW...
     

     
    On most Thranda Design aircraft they have a "Pilot" option in that the pilots can be changed around from Male to Female. There is no Female pilot with the Beaver, but only the Male "Beaver Dan"...   he is also fully animated in the arms, legs and head movements.
     

     
    The Float/Amphibian MISC Menu is different. You still have the earlier Throttle Quadrant (Old/New)/Window options (Flat/Bubble).
     

     
    Yes, you get a canoe!
     

     
    Amphibian or Float option...
     

     
    There is a Ventral Fin, that is an option under the tail...
     

     
    You can Retract or Extend the rudders from the MISC Panel
     

     
    There are another two options to raise and lower the rudders, One is a handle and cord in the cockpit, left floor...  another (the most simple) is to use the Keyboard command "Toggle Water Rudder".
     

    ________________________
     
    Flying the DHC-2 Beaver
    There are two options to starting the DHC-2, the (very) easy way via the Simplified "Engine Mode" option in the Menu/General panel...  and the long winded "Realistic" way. With the full engine start up procedure as is explained in the manual.
     
    Did you always want to look actually inside your engine?   Well now you can and the idea is to see how the engine is primed to start...  here Dan Klaue's genius strikes again!   There is the option via a menu selection "Radial Engine Animation" that brings up an animated Wasp Radial engine, you can also "PreHeat" and "Prime" your Wasp ready for start, but you have to be careful not to "OverPrime" the Cylinders.
     

     
    You can also prime the engine via the hand pump, deep left of the pilot's seat, switch the large ignition switch on (Fuel on as well of course)...  setting the Mixture to almost full RICH lever and a slight 5th throttle... then flick the left switch under the red cover to start the Wasp....  get the procedure right and the Beaver's prop will rotate then fire into action...  and also the Radial Engine Animation" will erupt into activity.
     

     
    On the Animation the pistons are exploding, and the animation is amazing beyond belief, adjust the throttle for a some serious movement, but the animation will also react to the adjustment of not only the throttle inputs, but with the fuel mixture from "Rich" to 'Lean" adjustments as well. Just move the mixture lever (not fully back) and see changes and the weakness in the sparks.
     
    These movements and the running of the DHC-2 also compliment the amazing sound range as well, there is a consistent adjustment of the excellent engine sounds to the condition of the running of the engine, that is the "Ugh, Ugh" of low lean to the high power "roar" of the full throttle. Also no two starts will sound alike, as there is coughing, sputtering, and the clanking of valves that all contribute the full aural experience, it's clever and highly realistic as well.
     
     
     
    The sounds actually also give you clues as to what's happening under the hood as is for the shear band of extensive sound patterns available here that show no gaps or the same patterns that just gets you all tinkly down your back...  it is highly, highly aurally realistic...  well like a full throated real 450 hp Wasp Jr engine sounds like.
     
    As noted you can have a freewheeling rear or locked to the rudder yaw, You really need a set of rudder pedals for the Thranda Beaver with built in toe brakes to use the freewheeling option, that aspect takes a little skill to get right. Taildraggers are a feel thing, and thankfully the Beaver is one of the better taildraggers. Of course experiment with the load and trim until you get that feeling the DHC-2 is rightly balanced.
     

     
    Thankfully the DHC-2 Beaver is one of the easiest taildraggers to taxi, keeping the right speed though is important, otherwise it's just easy to track straight. Thank God, because you can't see anything (sh**) with the nose high profile of the aircraft, so a slight hunch up out of the seat left is needed to follow the runway.
     

     
    I have also become quite adept at twisting the Beaver 180º to takeoff, right speed, then a touch more throttle, and then the full yaw tight turn, then quickly off the throttle again...
     

     
    You sit high, and the view out is quite good for a taildragger, but a slight glance to the left will align you up with the runway...  flaps are set to "Takeoff" which feels extreme here, in a very high degree setting. But the Beaver has a very wide flight dynamic in that the flaps can be set to extreme positions, but still be well within the aircraft's STOL (Short TakeOff and Landing) performance envelope.
     
     
     
    Speed builds gradually then suddenly the tail unstick's, and you need a kick of full of right rudder to maintain the straight ahead line...
     ...   another tool is to lightly touch the right toe-brake slightly to maintain the correct aligned course, between the two movements you can keep the Beaver straight. Takeoff is usually around 90 knts, but you don't need to pull back the stick as the Beaver just glides into the air on lift alone (the heavy set flaps), and to climb, it then only requires a little pitch to meet the 600 fpm climb-out you need.
     

     
    You can climb-out to the extreme of  1,000 fpm, but the 600 fpm angle is perfect, the one thing that should be highly noted is the aircraft's weight and feel, it is excellent. Now a slight adjustment to 800 fpm, which is perfect with still no loss of speed, also the Flaps are now at the "Climb" marker, as I need to climb up to 6,000 ft...  high? not really as the Beaver can do a ceiling of 18,000 ft (5,486 m)...  impressive.
     

     
    Unlike other aircraft you can consistently use the flaps and even in level flight, most aircraft need the flaps in and clean as soon as possible, but not the Beaver, as if you have a slightly uneven balance (front to rear) in the aircraft you can use the flaps to even out the balance without touching the trim, it is a tool every Beaver pilot's use.
     
    Stewart River is a 533-kilometre tributary of Yukon River. And heading up river towards Hecate Strait. But I am also not going all the way to the Strait either, just far enough to climb up high to turn west, but with the high mountains surrounding me, it means a climb of at least 6,000 ft, maybe more.
     

     
    Obviously you don't go very fast...   158 mph (255 km/h) or 140 knts is max and your cruise speed is only 143 mph (230 km/h) or 125 knts, but you don't really care about that factor, as this DHC aircraft is an absolute dream to fly.
     
    You can see why tourists love this lower Alaskan part of the world, the views are amazing, even X-Plane 12 amazing...
     

     
    I'm now at 6,000 ft, but it's still not enough, so another 2,000 ft to go up to 8,000 ft.
     

     
    Now higher I finally see a gap in the mountains and head west...
     

     
    Trimming the DHC-2 out is easy, the trims are set up up on the roof (But I use keyboard commands), and the Beaver trims out the pitch beautifully, now just small stick and rudder inputs keeps DHC straight, but better still yet is if you trim out the rudder as well, and now you can take both hands and feet off the controls and the Beaver will still fly like a dream straight and level.... this is one amazing simulation of a real aircraft.
     

     
    Fuel management is critical...  Six tanks altogether, but basically you switch between three, Front - Middle - Rear, via the big knob, far left panel. The three tanks are shown on the lower console. The Wing tanks are selected via another large knob on the left side above the door.
     

     
    Select Left or Right Tanks or BOTH, and all selections feed to the Front main tank, usually you would leave it on BOTH, for an even balance... 
     
    The EXT (external) Tank also feeds into another tank, the Middle one. There is a lever under the pilot's instrument panel to turn on the EXT tank flow, this then moves the ancillary fuel into the Middle tank, obviously it is good idea to select the middle tank to use all the extra fuel in there...
     

     
    The EXT tank lever is moved vertical (down) to access the fuel, when done then shut it off by moving the lever left. it will fill up the Middle tank quite quickly.
     
    I know why I love the Beaver, as you just purr along doing the job. The Beaver is like a light truck of the aircraft world, it shifts people and cargo with a ruggedness into a wilderness. Your sitting up there high, in charge, master of your own little universe, just shuttling along... heaven is a Beaver in flight, you can easily see why any pilot loves the DHC-2 so much.
     

     
    Ketchikan is rear to my left, Clarence Strait is to my immediate left...
     

     
    ...  soon the Stikine Strait comes into view on my right, a glance down and I'm horrified on how much fuel, including the extra top up amount has been used from the middle tank, I switch again to the rear tank, supping more fuel from that one instead, the whole trip distance is only 177 nm, but I'm also using a lot of fuel with that powerful Wasp.
     

     
    Time to turn into the Strait...  I have already lost 4,000 ft as I enter, but it was a slow descent.
     

     
    At first the Beaver dropped altitude, then crawled to a stop? the only way to continue the descent was to pull half back on the throttle, then you were moving downwards again. As we already know, the Beaver is known as a "flap-happy" aircraft and you can see and feel that aspect of why here...   That is the "Landing" setting, but you can go even slower if you go deeper with more flap and into the red zone to the full 58º degrees... Usually you would never use 58º, that aspect just gives you too much drag, but it is useful for the water landings, as it gives you a far lower speed and more lift at those almost static water approaches.
     

     
    Wrangell pops up now on my right. I'm down to 800 ft, and ready for the approach into PAWG Rwy 10 (6000 ft). Approach speed is around 70 knts, here your altitude is controlled only via your throttle, more power to go up and less power to go down, but even the mixture adjustments can even have an effect, so be aware if you are leaning out the engine more while reducing power.
     

     
    One note I will say is that the touchdown speed is still around 70 knts, dropping to 60 knts on the runway, and that feels a tad fast at full flap? but the speed does still give you full aerodynamic control on the landing and you can finely follow the centreline as good as when you took off...
     

     
    The landing bit is quite easy, the tricky bit is lowering the tail and keeping tracking directly straight, master that and you master the DHC-2. Part of the trick is to use the toe-brakes, but lightly and the rudder (stabs) and find that straight line... I'm not saying it is easy because it isn't, but it comes to you with practise.
     

     
    But let us be thankful, this is an amazing experience of an aircraft, and now the Beaver is available to fly in X-Plane 12.
     
    Summary
    Often referred to as the “best bush plane ever built”, the DHC-2 has been instrumental in developing and servicing far-reaching frontiers since it was first introduced in 1947. The DHC-2 Beaver is a single-engined, high-wing, propeller-driven, STOL aircraft that was developed by de Havilland Canada. This version has the "Holmes Extended Engine Mount", which moves the 917lbs Wasp Jr engine forward by almost 10 inches for a better rear load balance (Centre of Gravity).
     
    Any aircraft coming from Thranda Design is usually full of amazing features and outstanding quality design, and certainly you are not disappointed here. In the design aspect the aircraft is extremely the best yet from Thranda, the quality is overwhelming to the point of ridiculous...  the DHC has full hi-res PBR realistic effects, featuring true-to-life plate deformation and to-the-rivet precision, not to mention the high quality materials internally and externally. Detailing and the modeling is absolutely first rate, this is an outstanding Beaver.
     
    Not only is the instrument Panel one of the best yet in X-Plane, it is also fully customised via the "Dynamic Generation Series" in not only giving you your own control over the way the instruments are laid out, but to swap and change other instruments as well including; Aspen EFD 1000, S-Tec 55x autopilot, RealityXP GTN 750 (these are optional addons) and a Collins 614-12 ADF. Eleven liveries are provided, but also again you can create and design your own liveries with the DGS system. Options include, Skis, mud flaps, Old and New quadrants and bubble windows, and the Amphibious/Float version is now part of the X-Plane 12 package.
     
    Sounds are outstanding, with High fidelity, multi-track sounds with smooth transitions and amazing atmospheric effects, 3D audio effects, including "blade slapping" sound when view is perpendicular to propeller, start up and engine mixture variance is also highly realistic.
     
    Menus are also extensive, with sound adjustments, weight and balance manager with visual chart, lighting, doors, views, reflections and an amazing radial engine visualisation in a pop-up window, which showcases the inner workings of the engine.
     
    Yes a lot in this review is very much like the X-Plane 11 original version, as most in the design features and menus are the same, but a lot of the hidden areas, including the flight dynamics and performance related to X-Plane 12 have all been revised. Also the textures all now 8K, up from two 4K textures for better fidelity, the Skunkcrafts Updater is also now used for direct updates. All earlier purchasers of the Thranda X-Plane 11 DHC-2 can upgrade for 30% off with the new XP12 model. This aircraft is X-Plane 12 only, but the XP11 version is available.
     
    But a few things have been affected in the transition with the Beaver. Debatable is the "Shiny, shiny feel" of XP12, although overall the aircraft looks extremely better than XP11. Lighting has lost a lot of it's shine (pun intended) Instruments are hard to read and external lighting is virtually not visible, but to note a lot of X-Plane 12 aircraft are like this, we feel that lighting needs a lot more adjustment from Laminar Research. Thranda Aircraft also extremely dark, hard to see inside and use, but that also may improve over the X-Plane 12 changes.
     
    This is the iconic de Havilland Canada Beaver as in depth simulation, with as much quality and it comes with the sheer force of ideas available here, and in reality isn't that is what simulation is really all about, brilliant aircraft with exceptional quality and flying dynamics and a huge feature list. So really want the very best then here it is....  
     
    Highly, Hugely Recommended.
    _______________________________
     
    Yes! the DHC-2 Beaver DGS Series XP12 by Thranda Design is NOW! available from the X-Plane.Org Store here : 
     
    DHC-2 Beaver DGS Series XP12
    Price is US$34.95
     
    Requirements
    X-Plane 12 (not for XP11) Windows, Mac or Linux 8 GB VRAM Minimum. Download Size: 1.2 GB Current version  1.0.1 (October 16th 2023) The plane comes with the Skunkcraft auto-updater   Owners of the Thranda DHC-2 XP11 can get this new XP12 model for 30% off. Please find the coupon code in your original DHC-2 XP11 Invoice. ________________
     
    Installation and documents: Download is 1.66Gb and the aircraft is deposited in the "General Aviation" X-Plane folder.
    Installation key is required on start up and is supplied with the purchased download file.
     
    Full installation is 3.27GB
     
    Documents supplied are:
    Changelog.txt Thranda Beaver Documentation XP12 v1.0.pdf X-Plane G430 Manual.pdf X-Plane G530 Manual.pdf  
    Checklists and loads of Performance graphs are provided in the extensive manual.
     
    Review System Specifications
    Windows  - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD
    Software:   - Windows 11 Pro - X-Plane 12.07r1 (This is a release candidate review).
    Plugins: Traffic Global - JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 : Skunkcrafts Updater
    Scenery or Aircraft
    - CZST - Stewart - XPORG (formally Beti-x) (X-Plane.OrgStore) - US$25.00
    - PAWG - Wrangell Airport, Alaska by NorthernSky Studios (X-Plane.OrgStore) - US$16.95
     
    ___________________________
     
    News by Stephen Dutton
    20th October 2023
    Copyright©2023: X-Plane Reviews
     
    (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
     

     

  7. Like
    Blueb reacted to rcmarple in X-Plane 12 : State of the Union   
    This certainly helps explain the "payware lag" that developers have had to contend with to upgrade v11 acfs to the brave new world of v12. Imagine having someone work for months fixing lighting/flight model or whatever, only to find it changes again? 
     
    *** Message to developers - I DON'T MIND PAYING FOR UPDATES - keep at it 🙂 ***
  8. Like
    Blueb reacted to Stephen in Behind the Screen : May 2023   
    Behind the Screen : May 2023
     
    Not many review sites expose their inner workings. But I believe (as I have since my first reviews), that to go forward in any concept (in this case an Aircraft Simulator) that it is a learning process. To see how we do and deal with day to day involvement with the simulator, you can then make choices with your interaction with your own simulator. Yes I spend a lot of time per week doing X-Plane simulation...  interaction means accessing new product, keeping the simulator in a good working order (filing and updates), which oddly can be quite time consuming, learning new concepts relating to the simulator, and also learning the details of the aircraft that are being simulated. I went through that review process last month. But on average I am using X-Plane around seven hours a day for six days a week in one capacity or another, which adds up to 42 hours a week, that is a lot of time to be in a simulator, but weirdly I don't yet find it boring or uninteresting, in fact quite the opposite.
     
    So yes the point here with BtheS and most importantly in the reviews is that as a user you can take away information we have learnt and passed on to you, again I believe that yes you want to know the latest information on a new or updated/upgrade releases. But more importantly you take away details that can short cut the learning curve, to getting to the core of the flying or interacting more quickly with the simulator, and most importantly the aircraft.
     
    Yes I admit I do tutorials as part of the review process, I call them "Short Cuts", or the way that you can follow the process to learn how it works in an edited form. For example the release of the FlyJSim Q4XP (Dash Q400) had a brand new style of FMS (Flight Management System) called UNS-1Ew Flight Management System. The concept of the FMS (or user layout) is quite different (in using numbered lines) to program the FMS with Flight (Route) details and Performance elements, plus the added elements that are important like X-FILL or Crossfill between the left and right FMS consoles. It is quite deep in interaction information.
    But here X-PlaneReviews we showed you how to programme the UNS-1 in an edited version. Obviously you can download the official Universal UNS-1 manual and go down in deeper into the "nic nacks" of the UNS-1 system, but to get you airborne and flying the Q4XP as soon as possible, then that tutorial is right there for you to digest. Yes I admit the tutorial adds on a fair bit of length to the review, should the tutorial section even be in a review, and not be set out as a separate tutorial?
     
    I will answer that aspect in that putting the tutorial within the review ACTUALLY it keeps it in context with that aircraft. And in most cases I refer to an older review with inserted tutorials if required from another review. As it also keeps the timeline correct of when in X-Plane that new technology or feature was released for the Simulator. I myself will go back to usually the original release review, to reflect the way to trigger my skills. These are again as mentioned last month my "Oh yes" I remember that aspect now, so it is also a stored information bank to access anytime I want to do an update/upgrade review and get my head back into that particular aircraft's cockpit and idiosyncratic natures.
     
    So it can take time to not only review (assess) a new aircraft, but to context it's new features and even it's impact on the X-Plane Simulator. Yes some releases are extremely exciting, as they do push the boundaries forward, introduce new ideas and features in to the simulator. These elements have to be analyzed and then explained to yourselves of why they are important, and the relevancy to X-Plane and the Simulator as a whole. These aspects are even more important when you have a generational change, like the period we are in now in X-Plane moving from the older (but mature) X-Plane 11 to the more dynamic X-Plane 12.
     
    Time is your biggest factor. Yes it would be wonderful to spend loads of time "Deep Diving" into aircraft systems and performance, but you simply don't have that precious time, as there is always a deadline to adhere to. Another point is that with reviews you can't cover absolutely everything in every aircraft, every single time in each review. We cover or focus mainly on the changes and features of the release, but as some aircraft are totally and noticeable highly detailed, so how do you cover all those elements without getting boring. Worse is that "feature escalation", means a lot of new features and details to cover. Go back only five years, and then look at the releases today to notice the compounding differences between aircraft releases. Reviews were mostly three day affairs, but today a week or even two is required to cover all the detailed points on a high quality, feature rich release.
     
    Which brings us to May...   On average in X-Plane you can expect a major release (meaning completely new) about every two months, or about seven major releases a year, the rest are updates and upgrades to currently released aircraft. (at this point in time there are an abundunce of X-Plane 12 conversions).
    So you might get two in one month, then nothing for three (Usually around the Northern Summer period), then multiple releases one after the other in a few weeks in the Northern Fall period. Obviously this is the nature of the X-Plane beast.
     
    The big release for May 2023 was the E-Jets Family from X-Crafts. This was a significant release because in the state of play, this was in reality the first new release for X-Plane 12. Your going to shake your head there...  as yes, as there already has been loads of committed official X-Plane 12 only configured aircraft released in the months prior. But in reality most had been developed in X-Plane 11 ready for an X-Plane 12 release, the X-Craft's E-Jet is totally an X-Plane 12 creature, it feels that way and the aircraft flies that way as well, so it was a significant release, an important one as it lays down the groundwork of what most major future X-Plane 12 releases will respond to.
     
    I was lucky to get into the "beta" development before release, the bugs were there, but nothing in relation to anything that would affect the review (hardware compatibilities), overall it was a masterful Simulation from some gifted developers.
     
    The X-Crafts E-Jet family has a huge list of features, the Intricate detail was noted as well, and to top it all off the aircraft had a brand new FMS system that needed explaining, and "yes" it would need a tutorial on how to use it. It was to be a big, if huge review with a lot of areas to cover. But that was okay, as I had one thing on my side...  time, or about 10 days.
     
    I did the early flight tests when also working out the new FMS, then started the review, three days in and I was at the tutorial point of explaining the FMS system. This area needs a clear head and focus, ultimate focus, but I still had tons of time (a week to the release date).
     
    Then I got a tickle in my throat, then it turned slightly raw, the next day I had a full blown Flu...  I had worked carefully through all the covid pandemic, but out of simply nowhere I was suddenly really sick, bleary eyed in bed sick... one day, two days, three days...  four days?
     
    Suddenly my world was collapsing, I had the most intricate part of the review to do and I couldn't even focus on my iPhone....  hell? On the fifth day I went to the desk, I worked through the tutorial, I felt totally awful, but I got it done. Now I was faced with only two days until the release and with only half the review ready? I still felt awful but worked on, time had now been squeezed down to nothing, still tons to do and cover to create the review, but you work on, I missed the release date "damn", but got the review completed late the next day, and then collapsed. (Sorry it was late). Aircraft Review : E-Jets Family by X-Crafts
     
    The above timeline shows your life can go from complete perfection to hell in only a day, the most important release of the year and I was completely down and out for the count, yes I was annoyed then, still get annoyed even now, but it's life and there are simply some things you just can't control.
     
    A week later I took a reluctant week off the review desk to have a complete break and recover, it's a bad Flu, around here it is everywhere, but that damn Flu completely dominated (ruined) my month of May... and yes I am finally feeling normal again.
     
    "The best-laid plans of mice and men often go awry", Robert Burns
     
    Coming up in June is the FlightSimExpo from Houston June 23rd-25th 2023. Laminar Research will hold a booth at the Expo, but no Seminar is currently booked. There will be no Expo analysis, but X-PlaneReviews will be doing an overview of X-Plane 12 from it's early beta release to it's present situation as displayed at the Expo, so look out for that.
     
    X-Plane is also currently very buzzy, and coming into the Northern Summer season that is a really good thing. Mostly we are having a lot of X-Plane 12 conversions released, but unusually also lot of new aircraft being released from developers as well. Notable also is the now huge selection of aircraft already X-Plane 12 configured, so there is a lot of choices already of what to fly in the new simulator version...   happy times!
     
    See you all next month
     
    Stephen Dutton
    1st June 2023
    Copyright©2023 X-Plane Reviews
     

  9. Like
    Blueb reacted to Stephen in Behind the Screen : April 2023   
    Behind the Screen : April 2023
     
    On average over a 20 to 30 year commercial flying career, professional pilots will fly usually about 4 to 5 types of aircraft, first in the right seat, then a command in the left. I'm not counting their non-professional activities like private general aviation, gliding or even to the extreme of aerobatic flying. This is the core total of flying airliners, either domestic or international.
     
    Do pilot's have to be more flexible in today's aviation industry? that is a big question, because, say in the 60's you could fly aircraft types from the BAC-1-11, progress to a Trident, then a Vickers VC10, then a Boeing 707 or a Boeing 747 Jumbo, or even on to the supersonic transport in Concorde. That career road would be far harder today, as you would mostly jump between types of the same design, say start in a A319, move to a A320, then a A321 and now an A321LR, you are progressing, but mostly on the same type, not "Types' of aircraft. Same with the A350 or Boeing 787 Dreamliner.
     
    Progress to each aircraft type would mean going back to class, instruction, training and finally the hands on evaluation that you could handle the new machine, a jump from say the VC10 to a Boeing 747 would be a large challenge, but nothing like the jump from a VC10 to Concorde, of which most crews of the supersonic transport were nominated from. Today the line between a A320, to a A321, is not as large, and a conversion would be in weeks rather than the months like in the past.
     
    Compare that to X-Plane, or with being a reviewer. God knows how many "Types" of aircraft and let us even include even the "weird" strange machines at that. Obviously I have lost count, but a thousand over 12 years is a rounded off figure, maybe even more than that, so you have to be pretty adaptable.
     
    Like driving a car, aviation still has it's basics in controls and instruments, so you can be "so called", adaptable. But unlike driving a car on a road, aviation machines comes with a lot of different variations, weights and sizes, again you have to be adaptable.
     
    A lot of Simulator users will also mostly stick to one type, or a variation of that type, a lot won't even progress from say a Single-Engined aircraft to a Twin-Engined aircraft, never mind a Commercial Jet. Another crowd will only fly heavies, big airliners, but most will usually use the Two-Hour rule of flying a Boeing 737 (Zibo) or Airbus A319/A320/A321 (ToLiSS), fair enough.
     
    Me I do like variety, always have, call it a challenge if you will, I couldn't be a reviewer otherwise. But I do have my core "Top Ten" aircraft that I fly personally, a few General Aviation machines, but mostly Airliners, the bigger the better.
     
    Also there is the aspect of getting "back into the groove". You would think with all that reviewing experience and skills, that I would easily slide into the seat and fly the aircraft like a pro, yes...  well no, it is not as easy as that.
     
    One big bonus of doing reviews in that when a new aircraft or type is released, you do what I call a "Deep Dive". Reviewing in detail allows you to spend a lot of time on that aircraft, sometimes weeks, study it, understanding all those minute details. Then to learn to fly it correctly... then pass on the information of what has been learnt to you the users of the X-PlaneReviews site.
     
    You would think that in say six months when the same aircraft from the same developer comes around with an update, with all that intimate knowledge learnt earlier, I should simply slide into the same seat and fly it again perfectly like the total professional I am, except that is very far from the truth. I even make copious notes, the Concorde review notes went for sixteen pages, yet I still need to revisit and revise them all every time to step back into that cockpit. And here is the thing...
     
    My first flight back in that seat is usually atrocious, totally laughable...  a professional, mostly a joke in watching my efforts. At least I don't have a check captain sitting over my shoulder rating my poor flying abilities, and ready to give my career the total thumbs down.
     
    Let's be clear, that is with the complex complicated detailed aircraft we are talking about here, sure I can pilot a GA around a circuit or two with my eyes closed, but something happened in X-Plane around eight years ago when basic PlaneMaker aircraft went to Plugins. Now the systems are real world duplication, so is now the way you also fly the aircraft in real world conditions in the Simulator.
     
    Triggers...  notes can give you triggers, and then you fly the aircraft and then release all that the stored information in your brain, it does come back to you quite easily, but some machines do have their peculiar idiosyncratic natures, not only in their systems, but their flying characteristics as well, say the Dash Q400... One flight will release the learnt peculiar tricks on using and handling the machine, the notes help, but going over the learnt procedures and you will soon fall back into that aircraft category groove. I'm an odd one as well.
     
    I just won't jump in and go flying (unless there is a reason), I go through the whole set of procedures from "Go to Woe", more so with an update (or upgrade) to cover the changes in the new updated/upgraded version, the differences between the Old and the New.
     
    That second flight (basically the review flight) is usually "Back on Song", not flawless, but back in tune with the aircraft, the third flight has to be flawless, if not there is something wrong or something has been changed? The only thing about this process, it is time consuming, two flights take time, three flights is in days to do a review, but you internally and personally have to know you have everything right, in the interaction between yourself and the aircraft before reviewing. That is why I don't like a lot of VideoJocks, watching them power through procedures and incorrect flying, and missing SOP's (Standard Operating Procedures) makes me cringe by in the amount of mistakes made, some are very good, and yes even I can learn from a real line pilot doing video Simulations, but most are "Cowboys", and have bad habits that are being passed on to the unsuspecting junior (learning) Simulator users in picking up and using the same poor methodology.
     
    Okay, I come from the strict school of being serious, and a lot of users reading this will say, Hey, lighten up, it's supposed to be "Fun" it's only a "Game", but my approach is strictly professional, if you want to "Fool" around and wizz upside down in a A320 (yes looking at you Austin Meyer) then your looking at the wrong personality type, to me "Professional", means being very good at what you do and to not fool around with a 80 Ton aircraft. Simulation was created as learning tool for real world pilots, we are just lucky, and if you have enough computer power, to be able to do the "EXACT" same things as the real world pilots do, that for me is where the excitement comes from, and my on line experiences.
     
    Out of the "Thousands" of aircraft I have reviewed, a few go into my own personal hanger, the ones that are very special, but also fit my own personal flying needs, I keep the list to like I mentioned to around ten aircraft, but it is about four to five of those aircraft are what I use consistently, again these aircraft are also required to have a shakedown regularly, and the same process of a "trigger" flight and then a regular flight are required to get me again "Back in the Groove".
    I know these aircraft intimately, and yet I still need to reset my brain to fly them correctly, lose one or two that has happened with the X-Plane 11 to X-Plane 12 transition and you feel a bit lost without them (both will be released for X-Plane 12 within the next month). Again I will stress that regular repeatable flying is still required to keep your skills in prime shape, yes it is more (even relaxing) fun than the serious approach of reviewing aircraft, but still serious in the way you approach in flying the aircraft professionally. To make it "Fun", is to set up a few scenarios, I have two.
     
    The first is a real world day's flying, usually three sectors between regularly used airports (quality sceneries), In Australia say the "Triangle". Brisbane to Melbourne, Melbourne to Sydney and finally Sydney back to Brisbane, all in a days work and following real world services. It's more tricky than you think to fly on real world times and turnarounds with the same aircraft type. Exhausting as well, but that is what real world pilots do everyday, but it is fun to coordinate the lot together...  The second is real world airport hopping. Start a service from say Barcelona and fly to Copenhagen, then from Copenhagen to Dubai (combining European to International with different aircraft types), then Dubai to Hong Kong, then Hong Kong to Los Angles and so on...  if you wrap up a sector in say New York, then the next time you fly you restart in the same place, say, New York to Copenhagen, and hey, you have flown around the world with real life timetables and the same aircraft types used on the real world routes... both above scenarios are based on real world flying, but for me a fun factor as well. But all learnt during these travels, goes back into the reviewing, and the consistent practise on aircraft types means your skills are kept at a high level.
     
    This April "Behind the Screen" edition, looks a bit into how I fly and do reviews, but also shows you the amount of practise it requires to keep your flying skills at a high level, same as the real world pilots...  I like to think so, dedication is everything in life.
     
    See you all next month.
     
    Stephen Dutton
    2nd May 2023
    Copyright©2023 X-Plane Reviews
     

     
  10. Like
    Blueb reacted to Stephen in NEWS! - Aircraft update X-Plane 12 : Let L-200D Morava by PWDT&NHAdrian   
    NEWS! - Aircraft update X-Plane 12 : Let L-200D Morava by PWDT&NHAdrian
     

     
    This aircraft was one of the most interesting machines of 2021, it is a classic aircraft... it also won my best (Classic) category of the year 2020
     
    Best Classic Aircraft : Let L-200D Morava by PWDT&NHAdrian 🏅
    A really interesting aircraft with an extremely high quality design and... er, interesting features.
     
    The quality was off the wall, but so were the interesting details and designs. Too far in some cases, in the aircraft was a bit tricky to fly, but since resolved and simplified. The full release review is here: Classic Aircraft Review : Let L-200D Morava by PWDT&NHAdrian.
     
    So if the Let Morava was so very good in X-Plane 11, then this now refined machine should be exceptional in X-Plane 12. This is an update, not an upgrade to X-Plane 12, meaning free to current purchasers...  nice!
     
    The update v1.4.0. basically covers the requirements of the aircraft to conform to the newer X-Plane 12 effects and features...
     
    Version 1.4.0 (Jan 5th 2023) New version for X-Plane 12 Implemented XP12 rain effect Updated cockpit volumetric lights Updated flight model Updated PBR textures to match XP12 rendering capabilities Updated external lights to use XP12 new effects  

     
    The Let L-200 Morava is a retractable landing gear four seat light twin which was one of the few light aircraft to be exported from behind the Iron Curtain during the Cold War era, albeit in small numbers. The Morava is distinguishable by its twin tails, standard thermal wing deicing equipment and inverted inline engines. The prototype XL-200 Morava flew for the first time on April 8 1957. The XL-200 prototype and a series of preproduction. L-200s were powered by 120kW (160hp) Walter Minor 6-III inline sixes. The L-200D remained in production until 1969, and 5 aircraft were licence built in Slovenia (then part of Yugoslavia) by Libis. Most L-200 production aircraft was sold to customers within the Soviet Bloc - Aeroflot for example operated a large number in a range of different roles. However small numbers were exported to western Europe, the USA and Australia. Please be aware, Morava is a multi engine aircraft without autopilot, so not an easy-to-fly aircraft!
     

     
    Images and video courtesy of PWDT&NHAdrian ________________________________________
     

     
    The Let L-200D Morava by PWDT&NHAdrian is now available from the X-Plane.OrgStore!...    Here:
     
    Let L-200D Morava
    Price is US$25.95
     
    Requirements
    X-Plane 12 or X-Plane 11
    Windows, Mac or Linux 4 GB VRAM minimum - 8 GB+ VRAM Recommended Download Size: 1.3 GB Current version: 1.4 (January 5th 2023) ________________   NEWS! by Stephen Dutton
    6th January 2023
    Copyright©2023: X-Plane Reviews
     
    Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Right Reserved.  
  11. Thanks
    Blueb reacted to Stephen in Behind the Screen : Year in Review 2022   
    Behind the Screen : Year in Review 2022
     
    When in writing up my review of the X-Plane 2021 year, there was a fear of 2022 for the X-Plane Simulator. In 2021 X-Plane was holding it's own and well against the onslaught of Microsoft's MSFS simulator, mostly through a lot of very high quality aircraft releases, but I knew the toy box was becoming increasingly empty coming into 2022, the feeling was not good.
     
    To a point that anxiety was very much well founded, transition years usually are. Worse the world now is not the same world pre-pandemic, as everything is now different, and getting worse month by month. As our blessed lives are being turned upside down by shortages, rising inflation, crypto failures, extreme weather temperatures and God knows what else, so who cares about Simulation? Well we do, and to a point it is our salvation from all the mess outside the home.
     
    Everything pointed to and relied on Laminar Research on to how the 2022 year went. It went good realistically, but also bad for all the other reasons. My prayers were for an early 2022 Easter X-Plane 12 release, but it didn't happen. Overall the non-release dragged on lower and lower throughout the Northern Summer, even Laminar Research ran out of promotional video's waiting, so they just made more, ten in the end.
     
    This also created a blackhole of content, nothing was going to be released pre-version, even after the release of X-Plane 12 on 6th September 2022 as an "Early Access" Beta. Developers still kept away except for the odd few, even the Upgrades to X-Plane 12 were slow in coming, but in a few cases it still allowed you fly your current aircraft in the new simulator version. Taking no chances this year, developers have been waiting for the "All Clear" of a full X-Plane 12 release before this time committing to releasing projects, rare, as in the past with any X-Plane version releases they usually went bonkers straight after the version release, in other words you now have to write the whole year off.
     
    That said the outlook going into 2023 has to be the best for years. Now X-Plane 12 has gone final...   the simulator will thankfully settle down and Laminar will still be also adding in new features, better scenery is also promised for X-Plane 12, even orthophoto, but don't expect that feature for a few years until the mid-version run, but for now thankfully the changes are done, welcome to X-Plane 12.
     
    Laminar Research 2022
    The 2022 year for Laminar Research was dominated by the public release of X-Plane 12 on the 6th September 2022. Released as noted as an "Early Access" Beta, it was expected to go Final just before Christmas, and in RC6 form it did, 17th December 2022.
     
    X-Plane 12 was late, really late, and by a whole year to be exact. This aspect was compounded by the Vulkan/Metal (11.50) version of X-Plane11 in the required overhauling of the core basics of the simulator, with changes over to the far more efficient APIs (Application Programming Interface) Vulkan/Metal from the original OpenGL, in other words they "ripped the guts out of it".
     
    So nothing could be done as everything in X-Plane 12 is built on or over these foundation core blocks of code, worse for Laminar was the fact that most, if not all of the major features in X-Plane 12, Environmental, Water, ATC, lighting et all, were also areas that had not been touched for years and were left in the "Too Hard" basket for far too long, mostly again related to the API construction.
    But Laminar had to eventually face the problem. In doing so it took a huge amount of time and effort to engineer all the ideas into a working simulator. Laminar are also not a big development team compared to most high-profile software developers, but they are thankfully seriously talented.
     
    Noises were made late February 22 that maybe an early release before the (northern) Summer was actually possible, but continuous issues with the water (meeting the land) and other niggles put paid to that. Overall all the elements were not ready even as late as August 22, a few rare viewings showed a Simulator that came with major elements that were still missing, then Austin Meyer went into full PR mode to cover the shortfall, he is good at it, but it didn't help with the crawling development speed.
     
    Personally I was expecting the worse by the release point. But the surprise was X-Plane 12 was, or is actually very good, thankfully far better than any of my expectations...  everything now has a modern real life glow and feel.
    But it was notably still buggy through the Beta cycle, and a few new announced features are still not present at the final release like the A330 FMS, a lot of the new objects and the announced scenery features, and I am not at all impressed with the night lighting, and don't get me started on the over the top windy weather system.
    So after all the trials of the year, X-Plane in it's new X-Plane 12 guise is actually looking very good for next year 23, and a lot of things should fall back into place again, so basically all the upheaval was worth the end result. More good news awaits.
     
    As X-Plane 12 does cover so many outstanding aspects that have now been implemented. For the first time since the start of the Vulcan/Metal project and even far earlier, Ben Subnic finally has a clear table coming into the new year. Obviously for a fair amount of the time early on in 23 or for the first few months it will require more fine-tuning of X-Plane 12, but then a new focus will turn to better VR (Virtual Reality) via OpenXR, better Networking and the already mentioned better Ortho images. But I still think Supnic will have something new up his sleeve, something unique, clever, ideas missing from X-Plane over the last few years during the API onslaught.
     
    Microsoft Flight Simulator 2022
    By it's standards Microsoft's MSFS Simulator had a quiet year. Things quietly improved on all fronts via consistent regular updates, certainly in the dynamics, as that then allowed the former FS big guns to finally ship their products, notably PMDG and their Boeing 737 Series. Regular World Updates also kept everyone happy, in areas like the USA, Canada, Italy and Malta, Iberia, Australia. It's an impressive list, and notably challenging to X-Plane in it's frail transition period.
    Microsoft also celebrated it's 40th Year celebration and ever since Bill Gates gave the world Flight Simulation, but still counted in also a decade of no updates and even a longer period of not actually being on sale on the market, until it was revived by Asobo only two and a half years ago, 30 Years is more realistic.
     
    The 40th Year celebration bought up the year's 2022 biggest controversy in INI-Builds. 12th June, Microsoft announced a partnership with inibuilds to release free the Airbus A310-300 as part of their 40th anniversary celebrations. A notable X-Plane 12 Developer then did a fire-sale, and cut instant ties with the X-Plane platform. To say this was a very nasty thing to do was an understatement, but not unexpected by INI-Builds, who already had an questionable history in the PR department. But users that had heavily invested in their products was to find out that basically the aircraft was going to soon outdated and relegated only to a former X-Plane (11) version, in other words any INI_Builds aircraft were unflyable in X-Plane 12 and then the "Shit hit the fan".
    Didn't INI-Builds realise that users that buy in X-Plane also buy their same products in MSFS, obviously not with major consequences and a reversal in late October that (Only) the A300 would now be updated to X-Plane 12 and will also be free, it is anyone's guess as when it will actually be updated, it is certainly is not going be a priority by INI-Builds.
     
    The big aspect of the whole debacle, was did Asobo buy or throw huge amounts of cash at INI-Build's for a market share grab? Like kicking X-Plane while it was down or at it's weakest point, it was all round a messy affair, that did far more damage to the whole of Simulation than help it.
     
    Aircraft
    2021 was a huge year for X-Plane aircraft, as most of the big developers had releases (except FlightFactor) with Felis (B742) and FlyJSim (Q4XP) leading the pack and a big update to Colimata's Concorde FXP. So as noted I was quite fearful coming into 2022 and that aspect came to pass.
     
    New developer AD Simulations released both a CRJ700, then the larger CRJ 900 a few months later, both very good, but newbie under-developed and required the services of DeltaWing to get them both up to scratch, this was a common theme thoughout the year, with good new talented developers coming into the X-Plane Simulator which is very good thing, but still on the steep learning curve. Another annoying aspect of this was releasing the aircraft in very under-developed states. All these developers are extremely good, but ticking off the i's and t's can give you a good reception or a poor reception to the marketplace, thankfully they were very good at quickly following up the fixes, but doing serious fixes for months in the open market is not overall a good look.
     
    The biggest most anticipated release of the year 2022 came in March with Rotate's massive McDonnell Douglas MD-11. My first flight in this extremely complex aircraft was "oh my God". And it's complexity nearly did it in early. But once all the noise died down and with a few updates later, most saw through the pain and realised it for what it actually was, or is a masterpiece, or the best release of the year.
     
    Although a late 2021 release, I finally was able to review Colimata's Concorde FXP in v2 guise, again a very complex (but hugely rewarding) aircraft to fly, but after the MD-11 it brought up the question of how to cope with these ultra complex aircraft and their systems (I still have nightmares about the Felis B742), brilliant in one aspect, but overwhelming in almost every other. 
     
    FlightFactor resurfaced in July with another variant of the Boeing 767, this time it was the -400ER version, I totally loved this larger B767, it works in every area. One other new heavy release was part of Laminar's X-Plane 12 fleet, with an excellent A330-300, but it didn't have the promised Airbus MCDU, but still the basic default FMS. As that aspect is (still) coming and hopefully very soon but not even with X-Plane 12 Final. All other default heavies including; B738, MD-82 were also significantly updated.
     
    But with that it put releases for heavies done for the year, the worst I can remember.
     
    Thankfully a star developer of the year was ToLiSS, with consistent (and clever) updates to the A346, A319 and A321, their extraordinary feature of excellent aircraft condition saves, was for me the absolute tool of the year.
    Magknight (B787, weak) and SSG (B748, strong) did a few updates throughout the year, and all the important updates came along after the X-Plane 12 release for compatibility, but that was about it for major metal.
     
    General Aviation
    After a very quiet 2021, General Aviation was a little bit brighter in 22. Mostly the main difference was coming from Thranda Design, now moving away from pure utility aircraft to GA Cessna's. First was the excellent Cessna 208 Grand Caravan in April, then they followed that up with the Cessna U206G Stationair in September, then to finish the year on a high came the announcement of the sensational 337F SkyMaster, the 208 and U206G also came with Amphibian/Floats variants. Their strong ex-association with Carenado, would mean far more in this vein to come in 2023.
     
    Although a late 21 release, the C172SP NG DIGITAL by AirfoilLabs was simply sensational in it's X-Plane 12 conversion. No new releases from vFlyteAir in 22, but their excellent PA28R Arrows G5-E1000 had a lot of attention with major updates in Jan, Mar and June, but to date no X-Plane 12 version, but I expect that version to come in very early Jan 23.
     
    Aerobask had a busy year. First there was the Diamond DA50RG, then the twin Diamond DA-62, and a major update to the ViperJet eX. All currently are X-Plane 12 compatible. The Dassault Aviation Falcon 8X from Aerobask was still not released again in 22, but will now be with certainty an X-Plane 12 aircraft, I have simply given up on a release date with the consistently delayed 8X...  Okay sometime Q1 2023, if not then Q2.
    Aerosphere could be classed as a "Classic Style" developer, but two releases this year were very good, in the PA-28-180 Cherokee C and the PA-28-235 Charger / Cherokee 235.
     
    The Cessna Citation 560XL by AirSim3d was another Citation Jet, very good, sadly being only released in X-Plane 11 and that aspect it clipped it's wings a little, but one to checkout and love in X-Plane 12, as I found it a great aircraft to fly and it very quickly became a favorite.
    2022 also finally gave us a decent Gulfstream in the Gulfstream 550 by AKD Studio's. Like AirSim3d, AKD are both newbie's to aircraft development, both are very to brilliantly good, but still in missing the finesse that comes with extensive experience, but both well worth watching in the future.
     
    The "Hotstart" Challenger 650 was a notable release in 2023, but at AUS $171.30 Australian Dollars (US$116), it is in silly money territory, certainly way, way out of my budget, and them some.
     
    SimSolutions had two releases, the AMD Alarus CH2000 and the Diamond DA40NG XP12, both very capable aircraft. vSkyLabs had three aircraft on cycle in 2022. The Maule M-7-235B Project XP12 (The first X-Plane 12 aircraft released), the Rutan Model-158 Project that was updated for X-Plane 12, and another X-Plane 12 aircraft with the Aeroprakt A22-LS Project XP12.
     
    Notable were the default fleet aircraft for X-Plane 12. All aircraft received significant upgrades for the new simulator version including the: Cessna 172 SP, King Air C90B, Cirrus Vision SR22, Super Cub, L-5 Sentinal, ASK 21 and Aerolite 103. New entrants included the excellent Citation X, Van RV-10 and the sensational BETA Tech ALIA-250 EVA (Electrical Vertical Aircraft) aircraft released in Beta 8.
     
    Classic Aircraft
    Virtavia dominated Classic Aircraft releases in 2022. Both then were upgraded old modeling only (no texture) aircraft in the Handley Page Hampden and the Short Stirling Mk1-4, but both aircraft were highly likable and fun. The Piper J3 Cub by SimSolutions was well done, but a real pain to fly without Rudder Pedals, it put me off taildraggers for life. Late 2022 was the release of C-47 conversions; The DC-3 Airliner and the coming TT-3 Turbine conversion and all for X-Plane 12.
     
    Worrying for Classic's is the departure of classic developers like Flying Iron to MSFS, will they come back to X-Plane? and the much desired Vickers VC10 conversion to X-Plane project by JustFlight was abandoned.
     
    Military
    The Lockheed Martin F22A Raptor from AOA had a big update in July, and AOA also released the T6A Texan II in November (X-Plane 11 only), a X-Plane 12 version of this aircraft will be very nice. vSkyLabs also released the abstract F-19 Stealth Fighter, a service design that was never to be past the prototype flying stage, but you can still fly it in X-Plane 12.
     
    Helicopters
    Helicopter releases were huge and plentiful in 2021, and that wasn't expected to continue into 2022...  and it didn't. We started the year with the Bell 47G-2A1 by FlyInside, a great solid design, but only a modeling version of the famous bubble cockpit. CowanSim had two releases this year with the 206L LongRanger, and the excellent but extremely difficult to fly CowanSim H125 (AS350 B3e). The update to X-Plane 12 of the SA 315B Lama by Philip Ubben and Khamsin Studio showed what to expect in the future in X-Plane 12 Helicopters, I'll give you a hint, it's going to be brilliant.
     
    Scenery
    The report at the end of 2021 for X-Plane Scenery was not good, so it could only get worse, and it did. Notably is the loss or migration of flocks of scenery developers to MSFS, they are simply piling them out over there, too many, and all at a very low cost.
     
    Nobody knew if X-Plane 12 would actually change the landscape (no pun intended), it didn't, but nobody cared anyway. But a late release during X-Plane RC5 meant a revamp of existing scenery tiles noted as v2.1.1 Scenery Update does change your very old (decade old actually) tiles for a fresher set to incorporate X-Plane 12 elements. But you have to totally re-download the full 54.6 Gb of scenery to update.
     
    More annoyingly about this scenario is that with the new X-Plane 12 lighting, as any 3d scenery looks brilliant in the new simulator, also the added seasonal effects are sensational as well, so you just hang your head.
    A few noises in that some developers are creating both platform scenery MSFS/XP12, but will we or would we buy it? We are so adverse to it, in they simply won't care about X-Plane now at all, as the developers are very vocal in telling us so...  so it is a very odd situation, they sell below the price rate in MSFS (or simply give it away), but don't care about us either? Doesn't look like a great business model to me. 
     
    So 2023 will be a very decisive year for X-Plane Scenery. Either with X-Plane 12 now released, developers will come back with their wares, or the migration to MSFS will continue. The horrible thought here is that the market for good quality scenery, and huge scope of it to compete with MSFS...   is wide open, more so in that by default MSFS already delivers most of it by default...  you can see the problem.
     
    But in all the gloom there was some very good bright spots. Nimbus finally delivered a big delayed scenery in March, KIAD - Washington Dulles, one I love, but it's very (extremely) heavy on your framerates?
     
    One scenery developer I labeled in 2021,
     
    "Worst of the year : Any Taimodels airport sceneries, a lot of ambition but absolutely no talent.", but what happened in 2022!
     
    Four extensive sceneries were released by TaiModels with; YSSY - Sydney International Airport in May, OMDB – Dubai International Airport in July and the first scenery released for X-Plane 12 in OOMS - Muscat International in October. But there was more...  as EGLL Heathrow, the biggest and largest scenery yet from TaiModels was released a week before Christmas 22. More shocking is that they were all very, very good. Quite brilliant in their cores, but most still weak on the boundaries...  they were however a huge step forward and a most wanted collection of all four. A side note for TaiModels was the update of their earlier LFPG - Paris Charles de Gaulle International Airport to X-Plane 12 in that it was glorious, shockingly good, and as mentioned if showed on how well or how good X-Plane 12 is for scenery, or could be.
     
    Globall Art released SBGR São Paulo/Guarulhos International Airport in June, so I added in the full monty with the São Paulo Mega Scenery package of three airports, well worth checking out. Another big package was the Genova COMPLETE 5 by Grifo Creations.
     
    Basically Aerosoft were quiet in 2022, but the one airport released was the excellent DGAA - Accra XP, in Ghana, exotic and worth your while.
     
    We expected it to be good, but KSFO - San Francisco Airport Definitive by ShortFinal Design was simply outstanding in August, head and shoulders above anything else, this year and even past years. Big, complex with clever lighting effects it had it all.
     
    A new developer called Airwil Sceneries gave us three Philippines based sceneries with Davao International Airport, RPVE - Boracay Caticlan Airport and RPSP - Bohol Panglao International Airport, all nice to explore.
     
    NorthernSky Studio's were quite busy with very small but very highly detailed regional airports in Hawaii and Alaska. PHNY - Lanai Airport, Hawaii, PAWD - Seward Airport, Alaska, PATK Talkeetna Airport, Alaska. Another Alaskan scenery was PACV - Merle K Smith - Cordova, Alaska in X-Plane 12 from DC Sceneries. Notable is that NorthernSky has moved on to MSFS, hopefully not permanently.
     
    Helsinki Metropolitan Area v3 by FA Simulations gave you another nice city skyline, and a welcome (for me) destination of LROP - Bucharest Otopeni International Airport by Chudoba Designs was also in X-Plane 12 guise. But in areas LROP was a slight disappointment in being so under developed.
     
    One scenery not covered by X-PlaneReviews but very well worth checking out was YBBN-Brisbane by Orbx, my local airport is a sensational scenery, and in X-Plane 12 guise as well, yes we would like more of this please Orbx. lastly to round off the year, FlyTampa released Amsterdam Airport Schiphol (EHAM) and for X-Plane 11/12. The first or the last scenery for X-Plane 12, as the big boys are not looking our way anymore.
     
    It is not a new scenery, Alps UHD XP12 by Frank Dainese and Fabio Bellini was an extended and a repackage of four previously released Alpine scenery packages for X-Plane 12, so it's sort of new, but excellent
     
    As noted, 2023 will be a very important year for scenery with X-Plane 12 being Final. I will say that a lot of the scenery going into MSFS is still old stock (highly upgraded), and even a lot of ex-X-Plane stock. Going forward, hopefully, and scenery released will be cross-platform, as we noted with Orbx and FlyTampa, we will see.
     
    Plugins
    I will state upfront that I am not a huge plugin connoisseur, so I only run what I call essential plugins in my simulator, running the VRAM profiler (Menu/Developer) can give you the horrors of how much these little monstrous tools can gobble up your framerate and their overall efficiency, I took to taking out as many of these laggards as possible. Again as a rule Plugins were also quiet in 2022, but the simulator's hatus in waiting for X-Plane 12 was the biggest cause this time around.
     
    Classic Jet Simulations (Now called "Ascend Tech Simulations") released another banner v3.5 update to the WorldTraffic 3 Plugin in April (a XP12 compatibility release was also done). Traffic Global had several updates (again upgraded later to XP12) throughout the year and more aircraft were added. 
     
    Both XPRealistic and WebFMC Pro both went X-Plane 12 compatible. xEnviro released v1.17, but for X-Plane 11 only. they noted that they couldn't do X-Plane 12 development because Laminar wouldn't help them, but an announcement at the start of the RC release cycle noted that Laminar will now give limited 3rd Parties access to the environmental model, so maybe that will change the situation in 23. Dark Space (xEnviro) have also released a version for MSFS, but with the average development in X-Plane over years I can't see it as being any better than the current X-Plane situation, and the high price remains.
     
    One tool I did like was ProCam XP by Aerosoft, a viewpoint tool, tricky to learn and not as flexible (or as complex) as say X-Camera. It fills in a niche for users that want a simplistic tool over a complicated one to get good views and saved views, it was a lot of fun to use.
     
    After purchasing SimBrief in 2021. Navigraph did a complete and total overhaul of their main product to Navigraph 8, plus a price increase. But the extra cost is well worth this now very expansive Navigation tool. New features include; Worldwide VFR Charts, Drag and Drop Route Construction, Seamless Zoom, 3D Globe Projection, Autopinning of Procedure Charts, Airport Crosswind and Weather Information and Vector Charts... its very impressive.
     
    X-PlaneReviews
    Not only in 2022 did we have expansive simulator changes, but X-PlaneReviews has also had a very revolutionary year. With the coming X-Plane 12 revolution, we had to think hard about hardware updates.
    If we wanted to get the best out of the new simulator version, then an (expensive) upgrade was required. I documented my journey, which was interesting, and hopefully helpful if you are faced with the same investment, notably I still will need a newer Graphic Card in 2023, but overall the foresight to upgrade was a very worthy one.
    Another part of the journey was also replacing my decade old iMac (2009) with a Mac Mini (M1). A forced update because of an old computer trying to run new software (Photoshop), when suddenly and abruptly Abobe made my machine obsolete. Obviously it totally blew my carefully created budget, but the final result was a total revamp of all my systems... it sort of summed up the year.
     
    X-PlaneReviews also took on a fresh look in new reviewers, six in fact. Most of the new reviewers in Dominic, Felicity, Stuart, Nick, LPNils and Joshua came over from the old FlightSim site with a few from Jude as well, so that gave our XPR site a much more varied look and feel, plus we can do far more reviews, so a big win, win. And finally we added in a new banner (header) system for more review details...   it was a big year for changes, and overall for a far better site going into 2023.
    _________________________
     
    It gets hard to predict a new coming year, so you go for your gut and in 2022 it was unfortunately pretty spot on. It was a major transition year and a slow one at that, as the slow release (delay) of X-Plane 12 really didn't help the simulator, but you can't right off 2022 completely.
     
    Were now done with X-Plane 12 going Final, so we can now get back in 2023 and to do some serious flying, it also means that the heavy full table is now done for Laminar Research as noted.
     
    How do I feel...  It's a big question isn't it and a marked one for the X-Plane Simulator as a whole. It was easy going into 2022, but going into 2023 not so much. The huge positive is X-Plane 12, it's brilliant really, better than anything Laminar Research have ever done, their proud of it, and we love it. But how much ground has X-Plane lost in getting it all to the table, to be honest here.
     
    Momentum is my most favorite word (after Critical Mass). It's an important word here in relating to X-Plane 12 in 2023. As the simulator will need momentum and a lot of it. X-Plane certainly has a lot of aircraft waiting to be released (Upgraded), including two mega aircraft in the Boeing 777 and 787 from FlightFactor, and Thranda have noted they have also have created a substantial list, The Falcon 8x is also well past it's due date. And almost every developer will need to update their aircraft or products to X-Plane 12. It's going to be a very, very busy Q1, even a Q2 of 2023.
     
    But that word momentum is critical here, X-Plane needs to build and build quickly, and with a whole new batch of developers and users. we need a lot of both, needed to break away from the niche and embrace the mass audience out there. Those that will sample MSFS, should also try out X-Plane. As the niche is now currently too small, worse it could relegate X-Plane to just a few. Many would like/love that promise, but it comes with a deadly caveat as the serious interest will go elsewhere, and in the end the simulator will simply dry up. Dramatic, maybe, but X-Plane needs the momentum and a lot of it to go far more the other way in 2023.
     
    Laminar Research knows this. They are hiring, mostly in Public Relations or to run the X-Plane site, not coders or content developers (well two), but mostly in expanding the simulator out to a wider audience. Personally it's about time.
     
    Again this review site cannot function without all the great and exciting work by the tireless developers that give us all this exciting and incredible product to fly and use, as they and X-Plane has come a long way and created leaps in quality and complexity in the last few years, and to a point I was very proud of the work they have produced, it is world class if not the very best in simulation product ever produced, and they are all top notch and very clever. To the X-Plane.OrgStore who supports this site with review products, service and updates, a really big thanks, this site just would just not function without that outstanding support.
    _________________________
     
    We will finish off with X-PlaneReviews famous best of the year awards…   So I will now list my Best of the Year 2022🏅
    (note the awards are given to only products I have seen and tested and the only ones I can vouch for)
     
    Overall Best of the Year : KSFO - San Francisco Airport Definitive by ShortFinal Design 🏅 🏅🏅
     
    Best Aircraft :  McDonnell Douglas MD-11 by Rotate.🏅
    Complex and a total brute of a machine to fly, everything a great simulation should be
    Honorable Mention : Boeing 767-400 by FlightFactor, a great variant of a great aircraft
     
    Best General Aviation Aircraft : Cessna Caravan 208 and Cessna U206G by Thranda Design 🏅
    Not one but two winners in this category, but both from the same developer. Innovative with buckets loads of clever ideas and waterbourne features, nobody else really came close.
    Honorable Mentions : Both Aerobask DA50RG and DA62 are exceptional quality, great to fly as well.
     
    Best Classic Aircraft : This category was poor this year, and the much desired Vickers VC10 conversion loss killed it completely.
    Honorable Mention :  Concorde FXP by Colimata is excellent and highly complex, the X-Plane 12 version should be off the planet.
     
    Best Business Aircraft : Cessna Citation 560XL by AirSim3d
    It's a winner by default as in being for X-Plane 11 only, but will be totally brilliant when in X-Plane 12.
    Honorable Mention : Gulfstream 550 by AKD Studio's, great potential, but still really in development. Hotstart Challenger 650, too expensive.
     
    Best Military :  T6A Texan II 🏅
    Not the absolute best for the category, but reviewers loved the Texan and note it will be very good in X-Plane 12.
     
    Best Helicopter : Aérospatiale SA 315B XP12 Lama by Philip Ubben and Khamsin Studio 🏅
    It nearly won in 2021, but in it's revised X-Plane 12 guise it is simply sensational.
    Honorable Mentions : Bell 47G-2A1 by FlyInside. It is very good, excellent to fly, but by only being modeled (but well done) and no textures the 47G just doesn't quite live up to the quality required today.
     
    Best Landscape Scenery : Alps UHD XP12 🏅
    Their back, and with a revamped Alpine package by Dainese and Bellini, Briliant as usual, this time with X-Plane 12 effects.
    Honorable Mention : Helsinki Metropolitan Area v3 by FA Simulations, X-Plane desperately needs more city scenery.
     
    Best Airport Scenery : KSFO - San Francisco Airport Definitive by ShortFinal Design 🏅🏅🏅
    A scenery the "best of the year"? yes absolutely, it is a mega scenery and by a genius.
    Honorable Mention : It has to go to Taimodels airport sceneries for being the most improved for YSSY, OMDB, OOMS and even EGLL, but Orbx YBBN and FlyTampa EHAM are brilliant (if expensive) X-Plane 12 filler releases.
     
    Best Plugin(s) : Navigraph 8 🏅
    They asked for more money, but you got a brilliant new concept in return, essential.
    Special Mention(s) : None really, with no exceptional ideas released.
     
    Person(s) of the Year : Ben Supnic and the X-Plane coder team
    How the guy does it I just don't know. A magician that consistently just pulls rabbits out of the hat, not seen at all much this year, but the work is all there to see in X-Plane 12, no Ben Supnic, no X-Plane, simple as that, also less Austin would be a better thing all round.
     
    Best Moment of the year 2022 : Obvious, 6th September 2022 and the X-Plane 12 release, then relief as it was far, far better than expected...  then came the beta.
     
    Worst Moment(s) of the Year 2022 : Austin Meyer's was up there again with his antics, but the INI-Builds, and Asobo debacle left a bad taste in my mouth, personally my Adobe software lockout?

    Biggest distractions of 2022 : ...  Updates, and more updates...  more updates!
     
    Biggest overall feeling of 2022 : Under developed aircraft...  released far to soon, with the development being made in public and in not using beta testers anymore, new developers need to lift their game if they want our money.
     
    Personal Favorites of 2022 : Any ToLiSS (the save system allows ultimate flexibility), Q4XP (Dash) brilliant, FlightFactor A320U, good but badly needs updating, Rotate MD-80 still awesome, Thranda C206G, IXEG 737 Classic (until X-Plane 12 put it in the hangar). Notable is I really love the Rotate MD-11, Colimata Concorde and the Felis Boeing 742, but their high complexity (mostly in setting up the aircraft) limits flying time.
     
    Routes...   Copenhagen, Copenhagen and Copenhagen, Dublin, Dusseldorf, Edinburgh, Vienna, Brussels, Barcelona, Roma, Helsinki, Oslo, Munich, Tel Aviv, London Heathrow and Dulles. Notable is that with the newer scenery, Brisbane, Amsterdam will come on-line in 2023.
     
    That is X-PlaneReviews for 2022, and we will be back after a very much needed recovery and the review site returns again early into the New Year on the 4th January 2023.
     
    So Merry Christmas, and a Happy New Year 2023
     
    Stephen Dutton
    19th December 2022
    Copyright:X-PlaneReviews 2022
     
    (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions)  

     
  12. Like
    Blueb reacted to Medellinexpat in NEWS! - Laminar Research announces full X-Plane 12 release in December 2022?   
    Really?  Not everyone takes their flight simulation as seriously as you or I might do. Not everyone pours over every forum. Not everyone notices every small glitch or focuses on the next micro stutter. Like all those people who bought MSFS when it came out, suffered all the issues of downloading it and getting it to work and still being enthusiastic because they saw their house. All users, all paying the same amount as we do to Laminar. There will be further updates after it is released, just as there always have been, maybe in January.
    It may well be that Laminar intended the Beta to be better sorted by the holiday season but video sales in November and December are each generally around three times higher than any month in the year. It makes sense for Laminar to give up that potential revenue for another year? Plus MSFS 40th Anniversary Edition is due for release tomorrow. Many people when they select as Flight Simulator stay with it. Should Laminar give MS a free run at this years holiday market?
  13. Thanks
    Blueb got a reaction from CowanSim in Aircraft Review : CowanSim H125 (AS350 B3e)   
    Thanks Stephen,
     
    Wow, after reading your excellent review, I went and found: https://youtu.be/_QAGbSsws_0
    Another 14 minutes well spent. {grin}
     
    Now you've got me looking at my sim setup and wishing I could incorporate helicopters.
  14. Like
    Blueb got a reaction from PAL in Laminar Research : X-Plane and in the future the new world order   
    Avitab can do all that and more...
    https://forums.x-plane.org/index.php?/files/file/44825-avitab-vr-compatible-tablet-with-pdf-viewer-moving-maps-and-more/

×
×
  • Create New...