Jump to content

Scenery Review : KHAF - Half Moon Bay by RD Studios


Recommended Posts

KHAF HMB Header.jpg

 

Scenery Review : KHAF - Half Moon Bay by Rising Dawn Studios

 

Passion, it gets things done. Passion gets things completed even if you can't face another minute of it, overall Passion drives X-Plane. If it is not an aircraft you particularly want to bring to life or a place that is important to you then Passion will get it done. Well KHAF or Half Moon Bay is certainly important to Peter Suranyi of Rising Dawn Studios as he had certainly a lot of passion of the place to bring it to your desktop.

 

KHAF -   Eddie Andreini Sr. Airfield is on the coast just over the peninsula and 18 miles (30 km) south from downtown San Francisco which is a public airport in San Mateo County, six miles (9 km) northwest of Half Moon Bay, California.

The airport was renamed to Eddie Andreini Sr. Airfield in December, 2015, to commemorate his contributions to the community - he had learnt to fly at Half Moon Bay in 1953, and became an airshow pilot. Sadly, his love for flying eventually became his fate: he died in an airshow crash in 2014, at the age of 77.

 

So lets get straight into a first impression

 

First Impressions

I flew in from the south and you could easily pick out the scenery by the prominent Pillar Point Air Force Station. The air station provides radar coverage for Vandenberg AFB space launches and naval operations, there is a museum located there as well. The Pillar Point AFS is part of this KHAF scenery.

 

KHAF HMB Quick Im 2.jpgKHAF HMB Quick Im 1.jpg

 

Once past I did 180º turnback and reduced speed and height to 500ft to get a closer lower flyby look at the airport.

 

KHAF HMB Quick Im 7 LG.jpg

 

From a distance it looks a little barren, but there is in reality not a lot out there as the airport itself is situated on a slight outcrop of land.

 

KHAF HMB Quick Im 3.jpgKHAF HMB Quick Im 4.jpg

 

KHAF is only a small GA airport that does do an air/car show twice a year called Pacific Coast Dream Machines and provides a variety of emergency service and response functions including: Air ambulance and Medevac flights; law enforcement and homeland security patrols and Coast Guard sea-rescue operations.

 

KHAF HMB Quick Im 5 LG.jpg

 

The Pillar Ridge Trailer park is also highly noticeable on the west side as is Princeton by the sea township itself in the background. The airport has only one runway in 12/30 5,000ft (1,524m) long (alt 66ft or 20m)

 

KHAF HMB Quick Im 8.jpgKHAF HMB Quick Im 9.jpg

 

The Pillar Point AFS is always going to be your focus  in landing from the north as you can always keep a focus on your current position and line up turn points anywhere in the bay by its prominently positioned radar globes.

 

KHAF HMB Quick Im 10.jpgKHAF HMB Quick Im 6.jpg

 

You can go slightly inland to align directly into RWY30, but the sweet curve of Half Moon Bay also gives you a very perfect slight left down wing trajectory straight into the runway, it is there so why not use it.

 

KHAF HMB Quick Im 11.jpgKHAF HMB Quick Im 10A.jpg

 

Princeton by the sea itself is now your focus, there is a harbour with Pillar Point Harbor's huge marina and the town is directly at the end of RWY30.

 

KHAF HMB Quick Im 12.jpgKHAF HMB Details 10B.jpg

 

It is a very open space directly on the Pacific Ocean, so it is to be aware of sudden winds that can come out of nowhere as you get closer to the land.

 

KHAF HMB Quick Im 14.jpgKHAF HMB Quick Im 15.jpg

 

Princeton by the sea has a lot of modeling with marine and boating suppliers highly visible as is with on the coast side is the Pillar Ridge Trailer park but the trailers are very close together and colourful.

 

KHAF HMB Quick Im 16.jpgKHAF HMB Quick Im 13.jpg

 

Runway is super wide at 150 ft (46m) so you have plenty of space to adjust to those crosswinds.

 

KHAF HMB Quick Im 17.jpgKHAF HMB Quick Im 18.jpg

 

Runway textures are first rate, great markings and a great realism feel to the ground. There is great 3d grass as well for added realism, but you have to be almost on the ground to see it, but it is very good. The trees are interesting so we will get to them in a moment.

 

KHAF HMB Quick Im 19.jpgKHAF HMB Quick Im 20.jpg

 

Signage is excellent, in fact this pilot information for noise abatement sign at the end of RWY30 is a great marker of where to turn off to the taxiway...

 

KHAF HMB Quick Im 21.jpgKHAF HMB Quick Im 22.jpg

 

...   there are also a lot of container style aircraft hangars or boxes? littered all over the airfield. And I love the way the yellow taxi guidance lines are not actually perfectly straight but have been painted by someone by hand as it weaves around here and there in places. All runway and taxiway textures are ambient-occlusion refined and they look very realistic and worn.

 

KHAF HMB Quick Im 23.jpgKHAF HMB Quick Im 24.jpg

 

You have to be very aware of having the "Draw Parked Aircraft" tickbox on. If it is you get loads on Piaggio pusher aircraft and Cessna Caravans, the scenery comes with static aircraft that you can either show or not, it feels more realistic with the checkbox off as in reality there is not a lot of parked aircraft sitting at the airport, and was well certainly not very full when the google car drove past taking images.

 

KHAF HMB Quick Im 25.jpgKHAF HMB Quick Im 26.jpg

 

This is a pure and simple General Aviation airport, even a small jet feels big here and the stands are too small for one as well.

 

KHAF HMB Quick Im 27.jpgKHAF HMB Quick Im 28.jpg

 

A quick tour past the excellent "Frank Sylvestri Terminal Building" or shack with refreshments provided by 3-Zero Cafe.

 

KHAF HMB Quick Im 29.jpgKHAF HMB Quick Im 30.jpg

 

Once parked I went over my arrival and overall it is a really great scenery to fly into, very interesting with a lot of great features, but there are a couple of odd notes we will get to.

 

KHAF - Half Moon Bay Airport Overview

 

Eddie Andreini Sr. Airfield
Half Moon Bay Airport

IATA: HAF - ICAO: KHAF - FAA LID: HAF

12/30 5,000ft (1,524m) long (

Alt AMSL  66ft or (20m)

 

KHAF HMB Overview 1.jpgKHAF HMB Overview 2.jpg

KHAF HMB Overview 3.jpgKHAF HMB Overview 4.jpg

 

KHAF HMB Overview 5 LG.jpg

 

On the outset you feel there is not a lot in the scenery, but there is a lot of really nice intimate details when you walk around the place.

 

KHAF HMB Details 1.jpgKHAF HMB Details 2.jpg

 

KHAF HMB Details 3.jpgKHAF HMB Details 4.jpg

 

There are lovely old rusted hangars, and the detailing is quite good. The highlight was always going to be the terminal cum cafe which is very well represented here. My adage is that if you walk around a scenery and it feels like you are actually there then the scenery works from a realism point of view, and that is certainly the point here as I liked walking around KHAF a lot and taking in all the details.

 

KHAF HMB Details 5.jpgKHAF HMB Details 6.jpg

 

A nice little feature is that when the cafe is closed then the blinds come down and open/closed sign on the cafe door changes as well, I like that.

 

Finer small details are well done with a fruit stand across the road and a great worn and rusted fuel depot.

 

KHAF HMB Details 15.jpgKHAF HMB Details 16.jpg

 

Most of the scenery consists of aircraft storage with both modern in container style and older more of the worn style hangaring. They may be not the most visually interesting buildings but it is faithful to the airport, so it works very well.

 

KHAF HMB Details 7.jpgKHAF HMB Details 8.jpg

 

One hangar in 58-9 is for your own use. This hangar is fitted out for you to use and even customise to your own specifications, which is a great feature.

 

There is a lot of options you can do with your hangar including changing the poster on the wall and 10 are provided including B17, Cropduster, F35, Jumbo, Mustang, RD Logo (default), Trainer, US Flag, Yee Haw or you can insert your own image as 1024x512 in dimensions and as a .png file.

 

KHAF HMB Details 11.jpgKHAF HMB Details 12.jpg

 

Other options include seven different metal beam colours, two types of lighting in strip or old fashioned bulbs and a clean or dirty hangar.

There is full details on how to change all the different options in the manual, but you do have to overwrite the main scenery files, but RD Designs do make that easy by a folder set up. I used a different way than recommended by using the MOD (JSGME) tool to switch over the files, this way I didn't touch the original files and I could switch them back and to as I wished.

 

You can place your aircraft inside the hangar, but it is quite small. The Bonanza F33 just nicely fitted, but the Phenom...   well it just didn't.

 

KHAF HMB Details 13.jpgKHAF HMB Details 14.jpg

 

Other areas to see is a SFPD Police car storage and maintenance area with nice well done mobile cell towers set behind.

 

KHAF HMB Details 9.jpgKHAF HMB Details 10.jpg

 

Surface features

All runway and taxiway surfaces are excellent, but more than that they are also reflective, and beautifully so if there is a little rain around.

 

KHAF HMB Surface 1.jpgKHAF HMB Surface 2.jpg

KHAF HMB Surface 3.jpgKHAF HMB Surface 4.jpg

 

They are quite lovely in the right lighting conditions.

 

Animated Trees and Powerlines

One feature that is new to X-Plane is animated trees and powerlines...   The 3d trees move in accordance with the current wind speed and close up it is very effective as they swish in the wind, as do the powerlines which you can set at three speeds, none, light and full movement positions.

 

KHAF HMB Trees and Power 1.jpgKHAF HMB Trees and Power 2.jpg

KHAF HMB Trees and Power 3.jpgKHAF HMB Trees and Power 4.jpg

 

But even if this is a really great feature, I certainly don't like the look of the trees...  (boo hiss). It may be the X-Plane11 lighting effects but they don't look not very realistic at all, in that the heavy cross form of the trees that is heavily highlighted and quite badly. I loaded in the extra provided standard 2d trees (above right) and they didn't look much better either? great idea though, but it basically doesn't do what it is supposed to do and that is to look and make the scenery be realistic.

 

The grass is as noted very good when close or on the ground, and fills out the large areas of the scenery. You also have the choice of different grass volumes in density if you are short on performance.

 

KHAF HMB Grass 1.jpgKHAF HMB Grass 2.jpg

 

Pillar Point and Princeton by the sea

The Pillar Point AFS is a big focal point in the scenery, but so also is the Princeton township not to be confused with the Princeton in Colusa County.

 

KHAF HMB PP 2.jpgKHAF HMB PP 1.jpg


The great othrophoto ground textures really bring out the Pillar Point landscape with a great fusion of detail as it moves into the sea, the coast line around the scenery is first rate and no doubt the AirForce Station is a real landmark in this scenery.

 

Princeton by the sea is well recreated, but the ground textures are not overly minute, so you get a slightly spotted ground in some areas instead of detail, but it is overall very good.

 

The Pillar Point Marina and Oceano Hotel and Spa is the centre point of the township (manual notes it as the Pacifico Hotel?).

 

KHAF HMB Princeton 1.jpgKHAF HMB Princeton 2.jpg

KHAF HMB Princeton 3.jpgKHAF HMB Princeton 5.jpg

 

Marina is very well done with a lot of detail and static and animated yachts piling the harbour. The Oceano Hotel is really well done and stands out on any RWY30 arrival.

 

KHAF HMB Princeton 4.jpgKHAF HMB Princeton 6.jpg

 

The townships buildings themselves are a bit generic, they however show flats and units were as Princeton it is far more industrial and filled with large sheds and shops (boating and marine is big here). Pillar Ridge Trailer park is well represented and detailed.

 

Lighting

The lighting effects are a real mixed bag...  on the one hand they are really brilliant, but in some areas they are quite basic. This is a daylight hours operational airport and so the lighting at night is always going to be low key.

 

I am sure the lighting is correct, but RWY30 approach is well done, but the RWY12 approach has no end of the runway marker lighting?

 

KHAF HMB Lighting 1.jpgKHAF HMB Lighting 2.jpg

 

Airport buildings and field lighting is very good...

 

KHAF HMB Lighting 5.jpgKHAF HMB Lighting 4.jpg

KHAF HMB Lighting 3.jpgKHAF HMB Lighting 6.jpg

 

...    no qualms about that area at all, and the Chevrol Fuel area is a highlight. The scenery also comes with the great feature of the field signage is reflective with the ground, which is excellent.

 

KHAF HMB Lighting 7.jpgKHAF HMB Lighting 8.jpg

 

But Princeton by the sea is a bit average?

 

Oceano Hotel lighting is quite bland, and except for some street lighting the township is quite dark, no housing lights or lit signage to bring it alive?

 

KHAF HMB Lighting 9.jpgKHAF HMB Lighting 10.jpg

KHAF HMB Lighting 11.jpgKHAF HMB Lighting 12.jpg

 

Trailer park is far better, but overall the township is quite dull at night.

 

Summary

There is no doubt there is a lot of passion felt in this scenery as the developer has had a personal investment and direct involvement with this airport...  and it shows via the excellent detail and all the love that has been lavished here.

 

You also have to take into account that this is Rising Dawn's first scenery release and overall it is a really good one with a lot of optional features like the dynamic hangar you can tailor to your own tastes, choices of trees and performance options.

 

Great clever features like animated trees and powerlines, brilliant modern X-Plane11 features for excellent surfaces and lighting and in many areas it is outstanding.

 

But in a few areas it is a little basic. Those trees are certainly great in action, but look very old fashioned in overall context, more X-Plane8 than 11 in distance viewing, which is a shame as they are a focal point and major feature of the scenery. The township is a little a) rushed to finished or not quite b ) thought through. If you look at Beti-x townships like you would then know why? buildings that match the area and are correctly lit with signage, it feels a little rushed or unfinished, the Oceano Hotel and Spa and Marina however are excellent.

 

Overall the KHAF - Half Moon Bay scenery is outstanding if you like these small drop in and fly out scenic airports, the excellent orthophotograpic images are excellent from the air and that makes this scenery a very worthwhile destination.

 

Yes I loved KHAF - Half Moon Bay, great general Aviation scenery with a lot of great clever features, a worthwhile addition to your collection.

______________________________________________________________________

 

X-Plane Store logo sm.jpg

 

Yes! the KHAF - Half Moon Bay by Rising Dawn Studios is Available now from the X-Plane.Org Store here :

 

KHAF - Half Moon Bay

 

Your Price is US$19.90
 
Features:
  • Highly detailed rendition of Half Moon Bay Airport
  • Photo scenery coverage of the airport and nearby areas with 0.3-0.6 cm's per pixel
  • High resolution day and night textures
  • Animated 3D trees which sway according to wind strength
  • Ultra detailed pavement and runway markings, with reflections
  • Baked in ambient-occlusion effects
  • Realistic grass, with customizable density
  • Animated powerlines
  • A special night mode on the terminal building

 

 

Requirements :

X-Plane 11 or X-Plane 10.5
Windows, Mac and Linux
A video card with at least 2GB of dedicated VRAM - 4GB+ VRAM Recommended on X-Plane 11
Current version: 1.2 (Last updated August 25th 2017)
Note: X-Plane11 features only work in X-Plane11
 

Installation :   Download scenery file size is 310.90mb. With

 

RD_KHAF_Airport (327.10mb)

RD_KHAF_Ortho (170.95mb)

 

In being inserted into your X-Plane "Custom Scenery" Folder

Note the "RD_KHAF_Ortho " must be listed in the .INI situated UNDER the "Airport" file to work.

 

I found a (major) conflict with ground textures (Ortho) with Tom Curtis's "Golden Gate+South Bay" scenery, so you can't run both sceneries at the same time...  sad.

select via the X-Plane "Graphics" menu for "Draw parked aircraft" tickbox off for realism.

 

Extras including hangar customization and performance are created by replacing the original items with the extensively supplied versions. They are supplied in a folder sequence to overwrite the current scenery files (very clever), but I found the JSGME Mod Enabler MOD tool more helpful and quicker. 

 

Documents

Provided document is a full detailed manual and much included with more information and history:

  • RD_KHAF_Manual

______________________________________________________________________

 

Review by Stephen Dutton

27th August 2017

Copyright©2017: X-Plane Reviews

 

(Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions)

 

Review System Specifications:

Computer System: Windows  - Intel Core i7 6700K CPU 4.00GHz / 64bit - 16 Gb single 1067 Mhz DDR4 2133 - GeForce GTX 980/SSE2 - Samsung Evo 512gb SSD 

Software:   - Windows 10 - X-Plane 11.02

Addons: Saitek x52 Pro system Joystick and Throttle : Sound - Bose  Soundlink Mini

Plugins: Environment Engine by xEnviro US$69.90 : JARDesign Ground Handling Deluxe plugin - US$14.95

Scenery or Aircraft

- Piper PA30 Twin Comanche by vFlyteAir (X-Plane.OrgStore) - US$29.95 - Review here: Piper PA30 Twin Comanche

 

Logo Header X-PlaneReviews 200px.jpg

 

Link to comment
Share on other sites

  • Stephen unfeatured and featured this topic
  • 2 weeks later...
On 9/5/2017 at 9:17 PM, IamNabil said:

My one wish is that this was inside the pilotedge ZLA coverage area!

Hey,

 

I'm Peter, the designer of this airport. May be good news for you that my next airport is Riverside Municipal KRAL, which I think is actually inside that coverage zone, because it's close to Los Angeles so it should be.

 

Stephen, thank you for the great review by the way! Since this review has been published, version 1.2 is out, which corrects many issues, some even visible on the screenshots (like grass hanging over on taxiways, the mesh below the radar station, more variation on the police cars, alternate options for trees, etc). Technically my ground textures should overwrite Tom's ground textures, thankfully no one else has reported this. But I'm very happy that you've liked the airport overall!

Link to comment
Share on other sites

15 hours ago, Susu986 said:

 May be good news for you that my next airport is Riverside Municipal KRAL, which I think is actually inside that coverage zone, because it's close to Los Angeles so it should be.

It is actually on the map as one of their class D covered airports, so yes! I am stoked! I will have a customizable home airport with real life ATC! Looking forward to it!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...