Jump to content

All Activity

This stream auto-updates

  1. Today
  2. Yesterday
  3. NEWS! - FlyJSim updates Q4XP Dash 8 to version v1.34 While the release of the FlyJSim v4 Boeing 737-200 is imminent (weeks now, not months). The developer has presented another update for the excellent Q4XP or De Havilland Canada DHC-8 Q400 as version v1.34. The update covers those tricky doors, in trying to open/close them on the JPAD (Tablet). It was a very if an annoying tricky operation to open any door, certainly the left rear with the cargo door overlapping the passenger door... "Fixed Pressurization limiting doors operation", is maybe a fix? but you can't still use the doors manually, without using the load/unload feature. The custom Universal UNS-1 Flight Management System has had attention here to fix crashes, or bugs in the system... the same UNS is coming to the B737-200 as well! In standard bugs there are twelve fixes, mostly on the interaction between the Flight Management System and the displays... overall it is a great update. Version 1.34 (March 22nd 2024) - Fixed Pressurization limiting doors operation. ## UNS: - Fix crash caused by terrain display database at high latitudes (ENSB). - Fix crash due to bad input validation on HOLD FIX page (when entering 0 instead of a valid leg item number). - Fix crash when deleting flight plan FMS heading mode was on. - Fix once-a-second stutter due to wrong OpenGL texture transfer format for EGPWS display. ## FIXES - Change LNAV tracking algorithm to match the one used by the real FMS. - Fix incorrect overfly turns when sequencing to a CF leg. - Fix truncated procedure names in clearance-format flight plan (FPL > MENU > CLEARANCE). - Fix non-IFR airport not shown in database. - Fix incorrect COM-radio frequency validation in FMS TUNE page (frequencies above 135 MHz were incorrectly rejected). - Fix some conditional legs not being parsed correctly (altitude legs with Flight Level values). - Change texture transfer format for EGPWS terrain display to minimise stutter. - Improve direct-to roll out computation to avoid S-turns where possible. - Fix holds not computed properly if inserted at the current TO leg with less than 15 seconds left before sequencing (plane was steering for 360° and never turning back inbound). - If "DISABLE M/APPR" is selected in the NAV MENU, show the missed approach regardless once navigating to the last approach leg. - Fix HSI/FMS desired track display. The FMS was flying great circle paths correctly, but the HSI desired track was not updating along the (changing) great circle heading. - Improve display of DF (Direct-to-Fix) procedural legs with roll-out/PPOS point on MFD. Update download v1.34 is now available via the X-Plane.OrgStore (Account) or use the Skunkcraft Updater. Re-authorisation is required (A full restart is also recommended). Support forum for the Q4XP ________________ Yes! the Q4XP v1.34 by FlyJSim is available from the X-Plane.Org Store here : Q4XP by FlyJSim Price is US$79.95 Requirements X-Plane 12 or X-Plane 11 Windows, Mac or Linux 4 GB VRAM Minimum - 8 GB+ VRAM Recommended Download Size: 1.5 GB Current version: 1.34 (March 22nd 2024) ________________ NEWS! by Stephen Dutton 27th March 2024 Copyright©2024: X-Plane Reviews Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Right Reserved.
  4. Last week
  5. Scenery Review: PAPG - Petersburg James A Johnson Airport by Northern Sky Studio By DrishalMAC2 Introduction Petersburg James A. Johnson Airport (PAPG) is situated in the remote wilderness of Southeast Alaska, within the small but vibrant community of Petersburg. It serves as an essential lifeline to more populous regions, providing indispensable connections for the area's residents. Its single runway, 5/23, with an asphalt surface stretching 6,400 by 150 feet (1,951 by 46 meters), accommodates daily flights operated by Alaska Airlines with Boeing 737-700 passenger jets, reflecting the essential role of air transport in this region. Historically, the service was further supported by Boeing 737-400 passenger/cargo Combi aircraft, highlighting the airport's importance in both passenger and cargo transportation. Petersburg is a locale steeped in heritage, often referred to as "Little Norway," reflecting its Norwegian roots and the fishing industry that has long supported the local economy. Surrounded by the natural beauty of the Tongass National Forest, the area offers access to the unspoiled wilderness, including the scenic Inside Passage and the majestic Misty Fjords National Monument. These features highlight PAPG Airport's role as a gateway to Alaska's vast wilderness, welcoming adventurers and nature enthusiasts who are eager to explore the region's rugged terrain and varied weather conditions. Northern Sky Studio's latest scenery project for X-Plane aims to boost the realism of PAPG Airport and its Alaskan wilderness surroundings with detailed visuals. Targeting a broad spectrum of X-Plane users, from those passionate about general aviation to commercial jet aficionados, the package promises a significant enhancement. So, without further ado, let's explore how this scenery performs in testing. Copyright © 2023 Navigraph / Jeppesen Installation The installation process is straightforward. Download the file, which, once extracted, occupies about 2.6GB of space. Then, place the extracted file directly into your Custom Scenery folder within X-Plane. Additionally, the manual included in the download contains a link to an Ortho4XP tile for the surrounding area. This tile can be downloaded and added to the Custom Scenery folder in the same manner as any Ortho4XP file. Documentation The documentation included is concise to say the least, as it consists of just a single slide that outlines the installation process and includes links to the Ortho4XP file. Additionally, it features recommendations for third-party scenery addons, enhancing the overall experience. Among these recommendations is simHeaven's X-World, which is highly recommended for users looking to further enrich the scenery. Note: All screenshots featured in this review were captured using the optional ortho tiles and simHeaven’s X-World America First Impressions The airport is situated within Alaska's mountainous landscape, encircled by a complex network of waterways that contribute to the region's distinctive terrain. The scenery boasts an impressive array of ortho textures surrounding the airport, derived from high-quality satellite imagery. A particularly appealing decal effect has been applied to these textures, significantly enhancing their appearance and bringing the rugged beauty of Alaska's wilderness to life. Ground Textures and Foliage The runway textures are of outstanding quality, showcasing a rugged and worn appearance that aligns perfectly with expectations for an airport in such a remote setting. Physics-Based Rendering (PBR) technology enhances the textures of both the taxiways and runway, vividly bringing the airport environment to life. The ground textures are accurately marked for runways and taxiways. Notably, the careful addition of cracks and tire markings contributes significantly to the weathered appearance of the surfaces. The vegetation surrounding the airport, with its mix of small bushes and grass near the runway, appears naturally random. This deliberate randomness enhances the feeling of a remote and untamed setting. Ground textures stand out for their quality, with edge markings and tar lines that unify the different concrete textures, adding to the scenery's realistic touch. The rough and uneven edges of the taxiways contribute to the scene's authenticity, reflecting the rugged and genuine atmosphere of the area. Signage and Navigation Aids The airport’s signage is both accurately placed and of high quality. Specifically, the signage at runway hold points, which display aircraft radio frequencies, are notably sharp and clear. The accuracy extends to taxiway signs and runway distance markers, which are not only placed with precision, but are again both sharp and easy to read. This attention to detail ensures that navigating around the airport feels both realistic and intuitive. Main Airport Buildings The airport buildings have been recreated to a very high standard, featuring detailed 3D modelling and high-quality textures. Each building is unique, and after comparing them with real-life images of the airport on Google, it's clear that the models are true to life. The Alaska Airlines terminal building receives special attention, with its representation being particularly accurate and convincing. The main terminal is the only building with a modelled interior, and one which has been recreated with an excellent level of detail. From security signage to wall-mounted electrical sockets, the effort to recreate a realistic interior is evident. The inside is adorned with Alaska Airlines branding, enhancing the immersive experience. Details such as 3D people, welcome stickers, medical and security notices, and even televised images contribute to a bustling and authentic atmosphere. This careful attention to both exterior and interior details promises a convincing and immersive representation of the main airport building. Ground Clutter The ground clutter around the airport is nicely detailed, with a variety of high-quality, random objects, all strategically placed to enhance the authenticity of the airport. Items such as fire extinguishers, pallets, cones, and fuel pumps are thoughtfully added, each contributing to the realism of an active airport setting. Surrounding Area The town of Petersburg, surrounding the airport, has been recreated with careful attention to detail, depicting a highly authentic setting. Notably, the town features numerous dockyards and piers, significantly elevating the area's visual appeal. A tanker moored at the piers, numerous private small boats, and several De Havilland Canada DHC-2 Beaver seaplanes on floats bring the waterfront to life, suggesting a bustling local marine activity. Night Lighting The custom night lighting at PAPG enhances the experience for night-time flyers with a convincingly modelled nocturnal scene. An innovative feature is the control of Runway End Identifier Lights (REIL), and taxiway illumination, which activate only when 122.500 MHz is tuned into Comm 1 on the aircraft. This mimics a real-world system where pilots can manage night lighting, adding an extra layer of realism to the scenery. However, this feature introduces a significant issue. Activating the lights at this airport causes an unintended consequence where the Precision Approach Path Indicator (PAPI) lights at all other airports, whether default or addon, fail to illuminate unless 122.500 MHz is selected on Comm 1. This oversight is notable, and hopefully, it's something the developers will address in a future update. Performance Throughout my testing, I found the scenery's performance to be exceptional, characterised by a seamless experience with no noticeable drop in frames per second (FPS), or stuttering. The airport's relatively small size and its secluded location no doubt contribute to its excellent performance. Although Virtual RAM (VRAM) usage is marginally higher, this is a natural outcome of the scenery's enhanced details and higher quality textures over the default settings, and it is a small price to pay for the significant visual improvements offered. Conclusion Northern Sky Studio's rendition of PAPG Airport in Petersburg, Alaska, carefully combines authenticity with functionality, whilst targeting a diverse audience of X-Plane users. The scenery's highlights include its strategic location in the stunning Alaskan wilderness, high-quality ortho imagery, custom mesh with the optional ortho tile, carefully modelled ground textures, and bespoke buildings that resonate with the essence of the area. This detailed representation allows for an expansive exploration experience, accommodating everything from general aviation to larger aircraft like the Boeing 737, enabling pilots to embark on adventures through the nearby mountains and iconic sites such as the LeConte Glacier and Misty Fjords. Despite an issue with the custom night lighting feature, the scenery maintains an immersive and seamless experience. So, if you're seeking a launchpad to explore Alaska's expansive wilderness, Northern Sky Studio's PAPG airport stands out as an immersive base. It serves as an ideal gateway for X-Plane users keen on uncovering the rugged beauty of the Last Frontier. ________________________ Petersburg James A Johnson Airport by Northern Sky Studio is now available from the X-Plane.Org Store here: Petersburg James A Johnson Airport Priced at $12.00 Features The most detailed replica of airport buildings and vehicles EDGE, REIL and Taxiway lights can be enabled on 122.500 COM1 Custom hand-placed autogen High resolution ground textures / Custom runway textures High resolution building textures Compatible with all X-Plane 12 features Custom mesh for the airport area (Ortho4XP) All materials created for full PBR Shading and occlusion (texture baking) effects on all airport buildings High-resolution building textures Custom orthophoto for the airport and surrounding areas World Traffic 3 compatible Requirements X-Plane 12 or X-Plane 11 (both versions included) Windows, Mac, or Linux 8 GB+ VRAM Recommended Download Size: 2 GB Current version: 1.0 (Feb 15th, 2024) __________________________________ Scenery Review by DrishalMAC2 26th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copying of the content is allowed without consent from the author as per copyright conditions).
  6. Military Aircraft Review : North American T-6G Texan by Khamsin Studios & Philip Ubben The extent of the full impression of the effects of the North American T-6G Texan are hidden behind the diversity of the models and the different variations of the original aircraft. Not only for the American Air Force and Naval services "SNJ". But the British Commonwealth versions under the "Harvard" moniker, and localised variations of the Australian CAC Wirraway and Canada's Noorduyn, and it was even developed later into the North American P-64, altogether there has been 15,495 aircraft built, and it had an operational life of 60 Years (1935 to 1995). No small feat for a trainer aircraft. Modified as the NA-26, it was submitted as an entry for a USAAC "Basic Combat Trainer " aircraft competition in March 1937. The T-6 was based on the NA-18, but with a foot longer wingspan, it was the first of the NA-16 series with retractable gear. It was similar to the BT-9, but with a larger engine, the 550 hp (410 kW) Pratt & Whitney R-1340 Wasp, and could accommodate two .30 in (7.62 mm) guns. Khamsin Studios is already known for classic WW2 aircraft, like his last release of the Mustang P-51, But lately he has mostly been working alongside of Philip Ubben, and in the releases of Helicopters like the SA 315B Lama, and now again here in unison with this X-Plane 12 release of the legendary T-6G Texan. The T-6 Texan is a two-seater, dual-controlled, single-engine trainer. Solo flight is permitted only from the front cockpit because of restricted visibility from the rear seat and inadequate controls in the rear cockpit. On training flights, the student uses the front cockpit while the instructor occupies the rear, except for instrument training when the student occupies the rear seat. The aircraft incorporates a steerable tail wheel, but not a free castoring rear wheel. Khamsin is a long time developer for the X-Plane Simulator, so design quality is actually expected, and he does deliver it in spades. Notable is that when X-Plane 12 is the only priority (there will be no X-Plane 11 version). You can use these advanced uprated effects and the lighting to deliver a better all round visual impact. All pure X-Plane 12 aircraft have this quality sheen, but still the talent of the developer is required to make it work in creating this extreme realism that X-Plane 12 can deliver. Here is it excellent, you feel the construction of the aircraft, and the rivets and paneling that goes into the creating the best overall effect. Notable is the excellent reproduction of the R-1340 Wasp, and the huge maul of the front of the aircraft to accommodate it Central hub and propeller (Two bladed, constant-speed Hamilton Standard) are intricately modeled here, as are all the air-cooled nine circular cylinders of the Wasp engine. In payware aircraft you expect this sort of high quality detail, almost is regarded as a benchmark to the current state of the Simulator. But still you marvel on how really good it all is, how far the developer has come in being able to deliver a quality of this high standard for you to enjoy and use. It is all brilliantly conceived and delivered in detail and authenticity here, you can spend ages just admiring it all. Note the excellent hydraulic lines in the gear bay, lovely deep cross-treaded tyres add to the realism, as does the simple strut arrangement of the main gear. Glass in the canopy frame is excellent, better is if you look for the mottled effect in certain lighting conditions, shows again the highlighted realism of the glass. Looking inside and the detail is certainly the pre-war period, but it is still quite comprehensive for a basic trainer aircraft. Notable is the fact that the T-6 Texan was created to replicate heavier service aircraft, to get the same feel and handling as the front line machines, not for just a trainee rookie pilot in taking their first steps in flight. The T-6 is far more up the grade than that, even in other roles as a combat aircraft itself, if only in a lightweight role. As noted the student goes up in the front, the instructor in the rear. But the differences between the two positions are not that much different, bar the aircraft's systems and radios. You feel and see more of the aircraft's frame in the rear, but otherwise they are not that much dissimilar. You sit on your parachute in the metal tub, stick and rudder pedals are all very heavy duty, but it's a very realistic cockpit to be in.... First view looks complicated, but the instruments and controls are all really very standard in their placement and use, so you will soon adjust to the layout. Fuel cock, Landing gear, Trims and Throttle/Mixture/RPM are on the left, right side are the Electrical switches, lighting and fuses (non-active, all DC circuits). Forward the instrument panel is a mixture of instruments, but you can sort of mentally place them, in flying instruments centre left, and engine readouts centre right, with a compass headup front. With the exception of the hydraulic pressure gauge, which is installed only in the front cockpit. A suction gauge is also provided in each cockpit. The gyro horizon, directional gyro, and turn-and-bank indicator are all operated by the engine-driven vacuum system. The airspeed indicator is operated by the pitot and static systems, and the altimeter, and rate-of-climb indicator are operated by the static system. Top level includes (LtoR); Nav 1 Pointer, Airspeed (MPH), Adjustable Compass, Artificial Horizon/ Bank Rate, Manifold Pressure. Second row; Back up Compass, Heading, Altitude, Rate of Turn, V/S Vertical Speed, Engine RPM, Carb Temp. Third Row; Ignition Switch, Suction, Pointer, Accelerometer G, Clock, Oil Temperature and Pressure, Fuel Quantity , Cylinder Head Temperature and (Outside) Air Temperature ... .... far right is the Ampere, and far left lower is the Hydraulic Pressure Gauge. Primer knob is centre right with external lights lower, right lower is the COMM1 and NAV1 radio, with a Transponder set below. Rear seat instrument layout is almost identical, except for radios and transponder. Menu Immediately right of the forward pilot is a "Data Case"... inside is the Tablet/Menu, that when activated (hotspot) is positioned upper left of the pilot. It has five tabs; AviTab, Ground operations, Other options, Sounds and About. Five buttons on the right side of the bezel covers; Power, (not working), AVI (Not Working), XPL (close tablet), Brightness (brighter, darker and again not working). AviTab we will look at in a minute.... Ground operations is the default screen... here you can change the T-6G aircraft options, including a Prop "Spinner". "Early or Late" Canopy VHF and ADF aerials SNJ hook... activation knob is right side pilot seat Gear doors and Wheel covers Bottom left is the adjustable Left or Right Wing "Fuel" Weight in Kgs or Lbs Other options Here there are six options.... first one is to "Show (rear) Copilot". Both pilot heads are animated, and are very realistic, and in flight the actions are different to ground... but both pilots are the same character. Second and third options are the Canopy and Instrument reflections (on/off). Fourth option is an "Autostart" to start the aircraft automatically, this also adds in the "Speech" Option, that will talk you through the engine startup procedure... last Option is to have the "Fuel Switcher" ON or in auto mode. Sounds & About Both pages are first the standard X-Plane "Sound" levels, and the the "About" information of the different areas of work by each developer in Khamsin and Ubben... the aircraft version number is shown here as well. The AviTab Tablet as we have shown is also available (plugin required), it is the standard AviTab layout and tools, but you can rotate a chart from Portrait to Landscape... quality is not very good at chart distance. Liveries Eleven Liveries provided by Khamsin, and all are quite exceptional for authenticity. TA-127 is the default, but included are Big Red, G-TSIX, Lagarto, Popeye, Marines, RCAF, Spanish Lady and the famous Harvard (RAF) "Wacky Rabbit". Plus there is a "Bare Metal" aircraft. Flying the T-6G Starting up a Warbird is never easy, the sequence here is still a procedure to be religiously followed, but tricky if not done correctly. Officially you first select a fuel tank containing some fuel with the fuel tank selector. Then use the hand fuel pump to build up some fuel pressure (the pressure gauge should read more than 1 psi for the primer to work). Push the mixture lever to fully forward. Use the primer to pump at least 1 stroke. (Because over-priming isn't simulated in this first release you could pump some more strokes before hitting the starter and the engine might not need any further priming after startup. Now continue to use the primer it always seems to die until the rpm does stabilises around 700rpm. (You can either wait until the rpm does drop significantly before each new primer stroke or just pump a few fast strokes until the rpm won't drop anymore.). Tricky is the use of the primer... First you have to "Unlock" it? this is done via a hotspot arrow, hidden in the top section of the pump handle, then you can unlock and pump or prime the engine. Don't forget to relock the pump when the engine is running. Highly notable is that the engine start switch is a pedal set between the rudder pedals! If you don't want the palaver of awakening a grumpy old engine into life, then you have the "Autostart" Option on the menu, which is very good with it's vocal patter over the start operation... Highly realistic are cylinder (firing!) startup sounds as you feel the inconsistent firing, then the cycle of igniting the fuel, which is then produced as an effect out of the exhaust... it is really all well done and realistic. The prop settles down to a very authentic clatter in idle... sounds are very, very authentic as noted... A small note in using the "Auto" startup feature, is that make sure your throttle is set upwards, beyond the idle point, if not when the "auto" sequence finishes, then the engine will just "conk" out and stop again, not too much, to give it too much power, but enough to fuel the engine until it warms up. The mixture range (lean-rich) is extremely small, have the mixture set too high and the T-6G will taxi very fast, too low and it just shuts the engine down... but there is fine mixture window between the two settings, were you can get a controllable taxi speed... it is worth finding. So the taxi is nice if can find your comfort zone, but tricky in that the turn circle is one of the widest I have found in a long time, you can help it along of course with a few pumps of the left or right toe-brake, but in reality it is a wide turning circle. Adjust the mixture for more power, and your ready to go... The Pratt & Whitney R-1340 is the larger (louder) engine here, and it sounds glorious with the power on, tricky though is the extremely light tail, once it lifts the aircraft will shimmy badly, and it needs a lot of skill to control, it feels too light to me... so is it the X-Plane dynamics or just developer tuning... of course tail-draggers a tricky to fly (takeoff), but the T-6G seems too unrealistic at this point? Once clear and you enjoy the highly realistic gear stowage, first one strut moves, then it stops to allow the other strut to retract, then finishes the operation.... very good. Once airborne, you feel the weight of the Texan, but also the restricted power to climb? Rate of climb is noted at 1,200 ft/min (6.1 m/s), but you never get even close to that climb rate? Push the Wasp or put it on a high throttle for more power and the engine gives in spectacularly! So you have to keep the RPM well out of the red zone, around 20 (lower green band) to stop it exploding, so this highly restricts your climb rate. Performance is a Maximum speed: 208 mph (335 km/h, 181 kn) at 5000 ft (1,500 m), a Cruise speed of 145 mph (233 km/h, 126 kn) and a Range: 730 mi (1,170 km, 630 nmi). The Service ceiling is24,200 ft (7,400 m). Important is getting your Trims right. The Rudder Trim is the most important, then sorting it out to the right level with the Elevator Trim. Get both right and the T-6G will find the correct balance to fly manually. Important to get correct as there are no artificial helper's here, with no Autopilot installed, the Texan is a pure manual flying machine... would I like an autopilot? that aspect is debatable, but I like authenticity over modern features. Once sorted the T-6G is excellent in the air, a bit heavy (ponderous?) but extremely nice to fly and to manoeuvre with great sounds coming at you from the nose... The view from the Instructors station is excellent, but missing is the forward (animated) student pilot, having the choice to have the forward pilot visible (like with the Aermacchi M-346) would be a nice feature here. Lighting Cockpit internal lighting quite is basic, there are two fluorescent lights in the instrument panel and lights on each side panel. The T-6G does have a load more lighting features, including a full panel for "Recognition Lights" but none are operable or not done yet. That said, it looks very good internally and externally in the cockpit. External lighting is basic as well... there are two inset wing landing lights, navigation lights and that is about it, there is "Strobe" switch, but it doesn't work... so again in areas it feels there is still work to be done on the lighting overall. What is here however is very good Time to land... so I reduce the speed. Flaps are noted in 0 - 10 - 20 - 30 - 40 - 50 steps, but the reality is they are only three degree phases, 0 - 22 (ish) - 50 (full)... 125 MPH is the limit, but a full Flap will give you a level flying speed of around 100 MPH. I found the Texan very stable in the approach phase, quite easy to focus on the runway and keep a straight line in that same focus. Down goes the gear and the speed is reduced to 90 knts, notable is the drag effect on the gear when deployed, so you have to throttle up a little to account for that extra drag... I loved this approach phase, I was very, very deep into the aircraft and flying it as smoothly as I could. As I reached the threshold, I lifted (flared) the nose to rub off the speed, I didn't want to do a three-pointer, but still wanted the tail as low as it could be possible. A touch, then another... and I am down. Again the yaw was tricky until the speed had reduced and the tail was happily down, it takes a little practise to get it right with the rudder and toe-brakes, but its a foible to learn with these sort of low rear aircraft. Your thought go out to those naval boys, landing this aircraft on a shifting carrier deck, you can practise that of course in X-Plane, but I guarantee it was be a very tough challenge to get it right... Overall this was an excellent machine. _____________ Summary Khamsin Studio's is already known for classic WW2 aircraft, like his last release of the Mustang P-51, But he has mostly lately been working alongside of Philip Ubben, and in the releases of Helicopters like the SA 315B Lama, and now again here in unison with this X-Plane 12 release of the T-6G Texan. Modified as the NA-26, it was submitted as an entry for a USAAC "Basic Combat Trainer " aircraft competition in March 1937. The T-6 was based on the NA-18, but with a foot longer wingspan, it was the first of the NA-16 series with retractable gear. It was similar to the BT-9, but with a larger engine, the 550 hp (410 kW) Pratt & Whitney R-1340 Wasp, and could accommodate two .30 in (7.62 mm) guns. This is another exquisite design from Khamsin Studio, X-Plane 12 delivers very high quality aircraft, and this T-6G Texan is no exception, it is beautifully created and detailed, with a perfect soundscape and sound panel. Features are basic, with "Early" or "Late" canopies, Prop Spinner, VHF and ADF aerials, Gear doors and Wheel covers and SNJ tailhook (naval), excellent animated pilots are also included but only the rear can be hidden, front pilot would be nice visible if flying from the rear Instructor position. Popup menu also includes automated start procedure with vocal instructions, and the built in AviTab, but there is no autopilot or any helpers here. Everything is very, very authentic to this extensive service (60 Years) trainer aircraft and a few went into service (combat) as well, so you get that very genuine article feel and use of this very unique aircraft. It is certainly a huge credit to the skills of the developer of what they have delivered here, but totally authentic as well. Khamsin and Ubben have a very high record and a high regard in what they deliver in aircraft for the X-Plane 12 simulator, this T-6G Texan is no exception. But again you feel and use the step forward in quality and effects that dedicated X-Plane 12 designed aircraft deliver, it is quite extraordinary in what is now achieved in Simulation... This T-6G Texan is another banner aircraft to show off those highlights... Highly Recommended. ________________ The North American T-6G Texan XP12 by Khamsin Studio and Philip Ubben is now available from the X-Plane.OrgStore!... Here: North American T-6G Texan XP12 Price is US$32.95 Requirements X-Plane 12 (not for XP11) Windows , MAC or Linux 8GB + VRAM Recommended Download Size: 460 MB Current version: 1.1 (March 25th 2024) Aircraft download is 456Mb, and unpacked, then installed in your X-Plane Aircraft folder 636Mb. No authorization on startup is required. Documents manual_t6g_khamsin_XP12 quick_start_t6g_khamsin The provided manual (31 Pages) is excellent in being a notated original T-6 authentic manual, Quick Start (2 Pages) is mostly flying tips... Designed by Khamsin Studio and Philip Ubben Support forum for the T-6G Texan XP12 ________________  Windows - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD Software: - Windows 11 Pro - X-Plane 12.09rc5 (This is a Release Candidate review). Plugins: Traffic Global - JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 Scenery or Aircraft - KTCM - McChord AFB - Seattle - Boeing Country 10.5 by Tom Curtis (Sorry not now available) ________________ Military Aircraft Review by Stephen Dutton 26th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  7. NEWS! - VerticalSim Upgrades KMYR - Myrtle Beach International Airport to X-Plane 12 VerticalSim has upgraded their Myrtle Beach Airport scenery to X-Plane 12. Originally released for X-Plane 11 (still available), the KMYR package can now be purchased with this new XP12 version for $5 less if you are owners of the earlier XP11 scenery. See your account for the coupon at the X-Plane.OrgStore. Myrtle Beach International Airport is a county-owned public-use airport located three nautical miles (6 km) southwest of the central business district of Myrtle Beach, in Horry County, South Carolina, United States. It was formerly known as Myrtle Beach Jetport (1974–1989) and is located on site of the former Myrtle Beach Air Force Base, which also includes The Market Common shopping complex. The airport covers 3,795 acres (1,536 ha) at an elevation of 25 feet (8 m). Its single runway, 18/36, is 9,503 long (2,897 x 46 m). The airport entrance is on Harrelson Boulevard. The Terminal Building is named for Myrtle Beach's first mayor, Dr. Wilford Leroy Harrelson, who served from March 1938 to December 1939 and again from January 1942 to December 1943. The city bought land for the airport during his first term, and the terminal was named in his honor. Features include 2023 Airport layout Surrounding Autogen Hand Placed Such as, the mall & Warbird Park, High Resolution PBR Ground Textures Sam Custom High detailed jetways Animated car traffic 4K HD Textures Animated Justin Dupree Traffic routes for WT3 and Traffic Global Highly Optimized Color Graded Satellite Imagery HDR night Lighting Images are courtesy of VerticalSim __________________ Yes!... KMYR - Myrtle Beach International Airport by VerticalSim is now Available from the X-Plane.Org Store here : KMYR - Myrtle Beach International Airport Price is US$14.99 Requirements X-Plane 12 (not for XP11) Windows, Mac or Linux 8 GB+ VRAM Recommended Version 1.0 (March 21st 2024) Download Size: 1.7 GB ___________________________ News by Stephen Dutton 23rd March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  8. Earlier
  9. NEWS! - Aerosoft updates Helgoland XP to X-Plane 12 Helgoland XP is a scenery for X-Plane that recreates Germany’s only island in the open sea at a high level of detail and with many new thrilling options. Forces of nature have reshaped the East coast of the side islet "Dune" over time. RWY 21 was previously blocked by a high sand dune that is now entirely gone. The southern end of the airport, however, is now a place where waves break around the tip of the runway. In the wake of "green energy" Helgoland is currently becoming an important maintenance hub for nearby offshore wind farms. The existing military SAR base has been extended by a offshore maintenance helipad with its own hangar. From here you can fly your chopper to transformer stations out in the sea. All of them have their own helipad and make for a thrilling experience when approaching when waves are high. For the wealthier visitors several airlines started to fly regular routes to Helgoland from Heide-Büsum, Nordholz-Spieka and Uetersen. Airlines serving the airport all use BN2-Islanders, the only multiple passenger aircraft that is allowed to land here on these extremely short runways. Features: • Up-to-date, detailed aerial images • 1 meter mesh resolution so you see the smallest dunes near the airport • Helgoland-Düne airfield with extremely short runways • Current airport buildings with restaurant terrace and transparent tower windows • SAR helicopter of the German Navy • German Navy frigate (landable) • Custom vegetation • Very good performance • Animated ship and ferry traffic • Many 3D people • Animated ground traffic and more animations • Offshore Southern harbour of energy group (landable) • 4 Offshore wind farms with 4 platforms with their own helipads (landable) New in the XP12 version: • Standalone, fully customized XP12 version • Revised lighting • Ground now includes PBR reflections • Revised orthophoto, color optimized for XP12, including autumn/winter version • Weather effects for wet, snow and ice • Full support for native XP12 seasons, with no additional add-ons or plugins • Adaptation of the animated wind turbines to XP12 (animation also without SAM plugin if not installed) • New, fully XP12 compliant mesh including soundscape, seasons and 3D waves Notable is that you have to use the "Aerosoft One" application to install (update) the Helgoland XP12 scenery... Installation of Helgoland XP12 is done through Aerosoft one installer: Aerosoft One Universal After you have installed Aerosoft One, click on ENTER PRODUCT KEY (under the Library Tab) enter the Serial Number provided in this order. This will give you the option to download the airport. Note the different X-Plane 11 and X-Plane 12 installations. __________________________ Yes! Helgoland XP12 XP by Aerosoft is now Available from the X-Plane.Org Store here : Helgoland XP Price Is US$24.95 Requirements: X-Plane 12 or X-Plane 11 Windows, Mac or Linux 8 GB+ VRAM Recommended Download size: 4.7 GB - Installation done via Aerosoft one and serial number Version 1.0.0 XP12 (March 20th 2024 ) 1.0.2 for XP11 ___________________________ News by Stephen Dutton 21st March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  10. NEWS! - Scenery Released : LZIB - Bratislava International Airport XP12 by Chudoba Chudoba Designs has released Bratislava International Airport for X-Plane12 (an X-Plane 11 version is also part of the package). A well known quality scenery developer, this is their latest release. Bratislava, is historically known as Preßburg (Pressburg) ), is the capital and largest city of Slovakia and the fourth largest of all the cities on Danube. The city's history has been influenced by people of many nations and religions, including Austrians, Bulgarians, Croats, Czechs, Germans, Hungarians, Jews and Slovaks. M. R. Štefánik Airport, is located approximately 9 km (5.6 mi) northeast of the city center of Bratislava, spanning over the area of three municipalities (Bratislava-Ružinov, Bratislava-Vrakuňa and Ivanka pri Dunaji). It is the main international airport of Slovakia. Shortly after the independence of Slovakia in 1993, it was named after general Milan Rastislav Štefánik (1880–1919), whose aircraft crashed near Bratislava in 1919. Bratislava is a base for the Slovak Government Flying Service as well as Ryanair, AirExplore, and Smartwings Slovakia. During a brief period in 2011, the airport was also a secondary hub for Czech Airlines. Two maintenance companies, Austrian Technik Bratislava and East Air Company are also based at the airport. Air Livery has one painting bay for aircraft at the airport. The airport is category 4E for aircraft, and category 7 or 8 on request in terms of potential rescue. Bratislava is also served by the Vienna International Airport located 49 kilometres (30.4 mi) west of the city centre. Conversely, Bratislava Airport serves as a low-cost alternative (Ryanair) for people from Vienna and the neighbouring areas. Features PBR Textures Custom Models Optimized for best performance X-Plane 12 Ready Notable is that in downloading Chudoba scenery, they use a third party system to Authorise and Download the scenery. When you purchase the scenery you are given a Authorisation key and then are directed to the Chudorba Design (Antileak) website. You paste in the authorisation code, then select the ESGG - Göteborg Landvetter scenery, then the site will check your credentials and verify your purchase... then to install you then press "Download" to do the installation of the product. Price for this excellent Bratislava Scenery is an amazingly low US12.49! Images are courtesy of Chudoba Design _________________ Yes! - the LZIB - Bratislava International Airport XP12 by Chudoba is NOW available from the X-Plane.Org Store here : LZIB - Bratislava International Airport XP12 Price is US$12.49 Requirements X-Plane 12 or X-Plane 11 Windows, Mac or Linux 4 GB VRAM Minimum - 8 GB VRAM Recommended Version : 1.0 (March 20th 2024) ___________________________ News! by Stephen Dutton 21st March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  11. NEWS! - Navigraph adds Annotations to Charts 8 We love to make notes... certainly if you go deep into Simulation and want to replicate the real aviation world ethics. Now you can make notes "Annotations" directly onto Navigraph's "Charts" and also into the SimBrief application, it's clever, obviously... the update v8.33.0 is free to Navigraph Subscribers, just restart your Chart's Application in "About" (Settings). Opening up "Charts" will give you an animated demonstration of the tool. The Annotation feature works with any Charts Application available on Windows, Mac, Android, iOS, and in your preferred browser To use... select any chart (NTAA - ILZ & LOC Z RWY 04), then press the pen/brush icon second from right top toolbar. And this brings up the Annotation tool set... top right menu bar. Writing on the chart is via the "squiggly" icon far left (S114 knts)... ... you can change the colour (5th Icon) and the width of the annotation line (4th Icon). Squares (rectangles )or Circles (ellipses) can also be inserted, also they can be empty or solid objects, and can be used to highlight text. The "Pointer" Icon (6th Icon) can be used to move the set Square or Circle to a new position on the chart. The Return Icon (3rd Icon) will remove the last action, the Bin Icon (2nd Icon) will remove any (all) annotations on the chart. A great feature is that the Annotations are actually saved on the Chart, reopen the old noted chart, and the annotations are still retained, unless cleared by the bin Icon. SimBrief can also be Annotated, with the same set of tools... Select your Brief via "View Simbrief OFP" or open Simbrief in your Browser. Also notable is with the "Pointer" tool, you can resize the square or circle to change the area coverage. So it is all an excellent tool... but not perfect? My interaction found that the biggest difficultly was using the mouse to input or draw on the Charts or Brief. Those using a Tablet or IOS with the advantage of a Stylus Pen have a huge advantage here. In this instance it is excellent, but with a mouse not so much? So you also miss the keyboard interaction for making notes? this would create clearer and more precise annotations on the charts. Arrows with points would also be nice, as in pointing out particular points on the charts and Brief, as you would with a tighter arrow, rather than the big squiggly lines you can only do here. Annotations also don't show on the "Overlay" feature, only on separate clean charts. The tools are also only available in Simbrief in the "Charts" applications, not actually in the Browser loading pages, so you can't reverse load to the Browser, finally your notes won't print out with the Annotates overlaid on the chart, as it is still a clear print or pdf. It will be interesting to see how much I use of the features, but that mouse interaction makes it difficult... It's still clever of course, very Navigraph - at only a slight cost per month. _____________________________________ Yes! Navigraph v8.33.0 is now Available via Subscription, or if you already have a Navigraph account, then just update to the latest v8.33.0 Navigraph Subscription only on a monthly or yearly basis or EUR 9.05 / mo or EUR 81.64 / year Download Download applications are available for both Windows and Mac. SimLink is also available for download and is inserted into your X-Plane Plugins folder.... Internet connection is required for this application. SimBrief is now also intergrated into the Navigraph application, get it here: SimBrief Navigraph Charts Review version v8.33.0 _____________________________________ Application NEWS! by Stephen Dutton  20th March 2024 Copyright©2024 : X-Plane Reviews  (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) 
  12. NEWS! - X-Craft's updates X-Plane 12 developer timetable Developer X-Craft's have done an announcement on their up and coming developments for the X-Plane 12 Simulator. Noted are four developments in order; E-Jets v1.1.0 update, ERJ Family (all new) for X-Plane 12, Lineage 1000 Business Jet variant and a "Surprise" Project to celebrate X-Craft's 10th Anniversary in the Simulator. E-Jet Family The release of the E-Jet Family this time last year 2023, leapt this talented developer house into the big time. Huge quality and a massive feature list, placed the X-Plane 12 E-Jet into the higher echelon of releases, it all also came with a price to match, but you more than got your value's worth in this trendsetter design for XP12. We have had already a few updates for the E-Jet, but the next one is now noted in v1.1.0 There are coming new features. Most notably, "FMS Speed". Which is in that the FMS Speeds change based on the phase of the flight automatically. Added also is a "Steep Approach" system for the E170 and E190. (I.e. London City Airport, where the approach is 5.5°, almost double the usual 3°), and ILS Autotune will automatically select the correct NAV frequency into the radios as you approach the airport and switch from FMS to ILS at the right time automatically. The update will of course be also full of fixes and bug chasing. ERJ Family for X-Plane 12 The next aircraft due for the expansive X-Plane 12 update is the ERJ Family. Higher Quality and features will match the E-Jet Family here, also probably the price, but in reality you won't care as it will be so very good and match the future proof E-Jet. Testing is already ongoing, with 10 new real world ERJ pilot's doing a lot of in depth work to finalise the family for release, expect middle 2Q, maybe in a month or two. Lineage 1000 Business When the E-Jet Family was released, it was missing the "Lineage" Business jet variant. It was expected before Christmas 2023 (as a free addon, if you bought the Full "E-Jet Family Package"), but the Lineage Bizjet will also be available as a separate purchase, with the price expected to be the same around US$75 for the single choice variant. Development (in Progress) images have been released by X-Crafts. Obviously a "Work in Progress", and an animation by X-Craft's shows the detail of getting realistic materials to look "well realistic".... Special Project To celebrate X-Craft's ten year anniversary milestone. X-Craft's have decided to gift the community something great, and been working on a side project that will be free for the whole community! That is if you sign up to their Not-A-Newlsetter website. Details will be announced there will be forthcoming. It's ongoing progress for all for all of these projects, and the quality offerings for X-Plane 12 from X-Crafts... go on "Support your local Developer!". Designed by X-Crafts Support forum for XCrafts _____________________ Yes! the Embraer E-Jets Family by X-Crafts is now available from the X-Plane.Org Store here : Embraer E-Jets by X-Crafts Price per single aircraft is US$74.95 Embraer E170 by X-Crafts Embraer E175 by X-Crafts Embraer E190 by X-Crafts Embraer E190 by X-Crafts Purchasers of the E-Jet v2 (X-Plane 11) can get this new XP12 version with a 15% discount Embraer E-Jets Family by X-Crafts Price for the FULL E-Jet Package is US$134.95 Includes every E-Type | E170 | E175 | E190 | E195 Plus + Linaeage 1000 Private jet (When Released) Purchasers of the E-Jet v2 (X-Plane 11) can get this new XP12 version package with a 15% discount Requirements X-Plane 12 or X-Plane 11 The first few initial updates will still be X-Plane 11 compatible, however, 6 months after the release, the X-Plane 11 version will be final and development will continue only on the X-Plane 12 version. Windows, MAC or Linux - 8 GB+ VRAM Recommended Current version: 1.04 (December 16th 2023) _____________________ NEWS! by Stephen Dutton 2th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  13. Kia Orana & welcome back Stephen! What a tremendous and comprehensive review of this South Pacific jewel. Thanks to this masterful work by Maps2X-Plane, while you've been sailing the South Seas, I've been rekindling my real life Coral Route voyages by air. The essence and magic of these majestic Isles has been captured for sure. Thanks for showcasing this extraordinary package, which was an absolute must for this Kiwi who lost his heart to the mighty Pacific many shimmering moon-lit nights ago. Nigel
  14. Scenery Review : Society Islands - Leeward and Windward by Aerosoft Say Tahiti, or Bora Bora and the thoughts are always... "Exotic". French South Pacific plus it's amazing scenery makes this a destination in one of the absolute top hits of any one's bucket list. It has always been on my "most" desired destination. Actually I have been to Tahiti, but a long time ago, way back in the 1970's, but also just passing through en-route to Australia. Yes I have always wanted to go back... So what of Tahiti in X-Plane. Actually it was well serviced by the XPFR developers, but as usual you wanted a more overall detailed and extremely high quality package to bring out the best of the Simulator and the astonishing South Pacific area. This "Society Islands" is a set of two packages by the renowned Maps2X-Plane, the same developer house that created both the excellent Faroe Islands, Svalbard and Seychelles XP, all the sceneries reviewed here are Maps2X-Plane releases, but released under the Aerosoft banner. In so any installations are now through the Aerosoft One application, just add in the authorisation number, and the tool will do the install for you. As noted the Maps2X-Plane Tahiti series is in two different area packages, the first was "Society Islands XP - Bora Bora & Leeward Islands", released now back in September 2021 for X-Plane 11, of which you could call the "Western" area. This package was quickly updated to X-Plane 12 (v1.1) almost immediately. The second release is the new one "Society Islands XP - Tahiti & Windward Islands", and again what you would call the "Eastern" area, both packages together then covers the whole Society Island territory. Although the Leeward scenery was excellent as we shall see, it was slightly compromised in that it was only a regional scenery, with only local inter-island flying. This latest Windward package is significant because it adds in the main gateway or Faa'a International Airport, situated on the main island of Tahiti. This added aspect then connects all the Tahitian areas together, not only the international routes, but also the local domestic routes from the main gateway. The now combined area is also quite significantly wide to explore and to service. You could say French Polynesia is in the middle of nowhere, because it is, set deep into the central South Pacific Ocean. This makes connections hard and extremely expensive, as the area is a fair flight from any landmass. But there are direct flights from the U.S. West coast, Rarotonga and New Zealand, lately Hawaii was also added. I did an example flight from AKL (Auckland) to PPT (Papeete), it is a route distance of 2,242 nm, translated to 4h34m flightime, and right on the edge of the A321's endurance in fuel. Tricky as there are no alternative options out here. In this eastward direction, then maybe the Cook Islands (625 nm before Tahiti) as an option, but once past that point, then there are no other places to land. As we are going into NTAA - Faa'a International Airport, we will cover the "Windward" package first.. Society Islands XP - Tahiti & Windward Islands The Windward Islands are the eastern group of the Society Islands in French Polynesia, an overseas collectivity of France in the southern Pacific Ocean. These islands were also previously named the Georgian Islands in honour of King George III of the United Kingdom. The capital of the administrative district is Papeete on the island of Tahiti. Tahiti, Moorea, and Mehetia are volcanic islands. Tetiaroa and Mai'ao are outer coral Atolls... all these noted areas are available in the Maps2X-Plane Windward package. Faa'a International Airport Faa'a International Airport, also known as Tahiti International Airport is the international airport of French Polynesia, located in the commune of Faaa, on the island of Tahiti. It is situated 5 km (3.1 mi) southwest of Papeete, the capital city of the overseas collectivity. It opened in 1960. Regional air carrier Air Tahiti and international air carrier Air Tahiti Nui are both based at the airport. The focus and highlight of both sceneries is the Faa'a International Airport, and one very long runway 3420m (11,220ft). Faa'a International Airport Aéroport international de Tahiti Faa'a IATA: PPT - ICAO: NTAA 04/22 3,420m (11,220ft) Bituminous Elevation AMSL 2m/5 ft First views of Faa'a International are simply excellent, the vista has Moorea Island in the background. How far X-Plane has come with X-Plane 12... as finally we have realistic tropical reef water, and it is excellent here in surrounding the airport perimeters. In visiting South Pacific Islands, you sort of have to time travel back a few decades. Everything is not bright, shiny or new down here. At PPT, it feels like a past time, with an airport that has only basic facilities, no airbridges here, but certainly a nice South Pacific welcome. The Polynesian look and feel is very evident in the terminal building. Expertly reproduced here by Maps2X-Plane... Airport detail is quite exceptional, everything is covered both airside and landside with "Huge" detail... "dense" I call it... but there is a lot to admire and take in here. There is a fair bit of animated traffic airside (nicely done), but there is not much traffic movement on the ramps. A few regional connections and the odd International service is about it. But the majority of international aircraft moving in or out are significantly big long haul jets... the old Pan Am 707's in the 60's, then DC-10's and MD11's dominated in the UTA years, Boeing 747's and even A380's can get into here. Now it is the odd A340, B787, A350, but also now the long thin route single-aisle aircraft ETOPS, which are a common sight. Airport infrastructure is again excellent, with maintenance hangars and three (available) Heli pads, there is plenty of static aircraft and vehicles, but the detail in gates, ramp equipment and general clutter items is excellent. West side, is the Fire Station/Control Tower and administration buildings, an inter island area (Moorea & Tetiꞌaroa) is set over here as well. More helipads are also available. There is no 3d grass? but the field detail is excellent, with great drainage (including even drainage pipes) and fencing. Surfaces are also first rate, with wear/tear and filled cracks. PBR reflective (wet) active textures and burnt-in ambient occlusion is also available here, great for those summer tropical rainstorms. I have just been on a South Pacific cruise (talk about a coincidence)... The South Pacific has a certain look, lush vegetation and foliage, the bright vibrant colours and open sided tired buildings. It is the "feel" of the islands, and this scenery totally translates that "feel" into X-Plane. I could easily have been back in Nouméa (New Caledonia), Port Vila (Vanuatu) or Suva (Fiji )with this scenery. This Tahiti scenery is shockingly very good in translating that Pacific look and feel into the Simulator... Again the "dense" feel and infrastructure of the Faa'a locale is excellent, it fills right up to the airport boundary and even into it, creating a perfect diorama of the area... note the vista of Mount 'Orohena in the background. The capital Papeete is too the north of the airport. Again the density of the capital is really well replicated, extremely realistic and includes the extensive Papeete Port area for approach realism. This arrival area's aspects are all shockingly good, more real world detail than a simulator... you have to be impressed. There are two heliports (pads) on Tahiti... Taaone The heliport NTAA of Hôpital du Taaone, located about 8 kilometers east of Faa'a International. Again no expense was spared by Maps2X-Plane to create the authentic hospital for the Tahiti scenery. Taravao The heliport NTHV of Hôpital de Taravao, is located about 40 kilometers southeast of NTAA Let us not forget that Map2X-Plane's main speciality is terrain mesh with photo-realistic textures, for the landscape and the sea. Highly evident in their amazing Faroe Islands package. It is the same here for Tahiti and these same quality custom textures. In that they cover all the areas in both Windward and Leeward packages, plus create those excellent tropical water effects. They are dazzling to absorb. Moorea Airport Moorea Airport (NTTM, 1230 meters), also know as Moorea Temae Airport, is a regional airport on the island of Moorea, located 15 kilometers west of Tahiti. It is served by Air Tahiti, and can accommodate aircraft up to the ATR 72 in size. Moorea is a volcanic, mountainous island with the highest point Mount Tohivea at 1207 meters, and for its enclosed reef that surrounds the entire island. Moorea Airport is also known as Temae Airport (IATA: MOZ, ICAO: NTTM) or Moorea Temae Airport for its location near the village of Temae in northeastern Moorea. The airport is located 7.5 km northeast of Afareitu, the island's main village. It is set almost directly across from Papeete. The Moorean Polynesian style terminal has had a lot of attention, brilliantly done here by Maps2X-Plane, it is a genuine walkaround the area and be part of the scenery experience... almost photographic in detail. Airport infrastructure is first rate, with a small field tower, cargo and admin area, and housing for airport staff. Close by Temae is replicated, as are all the locales on the island with custom autogen, very realistic it is... highlight is the excellent water and realistic reefs. Moorea's coastline is excellent, with great vistas to explore, either by helicopter or seaplane... The Island's Hilton Luxury Overwater bungalows are also well replicated. Afareaitu There is one helipad NTHF on Moorea... it is sited at the Hôpital de Afareaitu, located about 8 kilometers south of NTTM. Tetiꞌaroa Tetiaroa Airport (NTTE, 770 meters) is a regional airfield on Onetahi, one of 12 islets of the Tetiaroa atoll, located 53 kilometers directly north of Tahiti. The islets are under a 99-year lease contracted by the famous actor Marlon Brando, and is home to "The Brando Resort". It is served by private flights by Air Tetiaroa, departing at a private terminal at Faa‘a International Airport. The islets (or motus), in clockwise order starting from the southwest corner, include: Onetahi (with regulated airstrip and site of The Brando Resort), Honuea, Tiaruanu, Motu Tauvini (Tauini), Motu Ahurea (Auroa), Hiraanae, Horoatera (Oroatera), Motu 'Ā'ie, Tahuna Iti, Tahuna Rahi, Reiono, Motu One (emerging sandbank) and Rimatu'u (with an ornithology reserve). Tetiaroa is extraordinary well done in realism, you could be really here, seeing Brando's dream... Marlon Brando "discovered" Tetiꞌaroa while scouting filming locations for the film Mutiny on the Bounty, which was shot on Tahiti and neighboring Moorea. After filming was completed, Brando hired a local fisherman to ferry him to Tetiꞌaroa. It was "more gorgeous than anything I had anticipated," he marveled. Society Islands XP - Bora Bora & Leeward Islands The Leeward Islands literally "Islands Under-the-Wind" are the western part of the Society Islands in French Polynesia, an overseas collectivity of France, in the South Pacific Ocean. They lie south of the Line Islands (part of Kiribati), east of the Cooks and north of the Austral Islands (also part of French Polynesia). Their area is 404 km2 and their population is over 36,000. The westernmost Leeward Islands comprise a three atoll group: Manuae (also known as Scilly Atoll); Motu One atoll (also known as Bellinghausen), the most northerly of the Leeward Islands; and Maupihaa atoll (also known as Mopelia) to the southeast. Bora Bora Bora Bora is part of the central island group of the Leeward Islands in the South Pacific. The main island, located about 230 kilometres (125 nautical miles) northwest of Papeete, is surrounded by a lagoon and a barrier reef. In the center of the island are the remnants of an extinct volcano, rising up to two peaks, Mount Pahia and Mount Otemanu; the highest point is at 727 m (2,385 ft). Bora Bora is part of the Commune of Bora-Bora, which also includes the atoll of Tūpai. The main languages spoken in Bora Bora are Tahitian and French. However, due to the high tourist population, many natives of Bora Bora have learned to speak English. "Mystic" is the word used with Bora Bora, or even "Bali Ha'i" which is a show tune from the 1949 Rodgers and Hammerstein musical South Pacific. The name refers to a mystical island, visible on the horizon but not reachable... a lot has been said that Bali Ha'i is not Bora Bora, but actually based on the real island of Ambae (formerly Aoba Island). Ambae is located in Vanuatu... but the images and the feel of Bali Ha'i is totally the Tahitian island. The peaks Pahia and Otemanu are excellent with the custom textures, as is the detail of the island's infrastructure, small ports and all the island's locales are very well done. But this is a review, not a travelogue... jumping from the latest Windward to the earlier Leeward packages, there is a difference? Also a time difference of 2½ years, and more significantly a different X-Plane era, Eleven not Twelve. Although the Leeward scenery was updated to XP12 (my guess the water)... a lot of the XP11 elements remain, like the + trees, no active textures or burnt-in ambient occlusion effects, and not the more modern 3d style XP12 foliage. It makes a slight, but significant difference to the look and feel of this earlier scenery. It feels more plainer, even slightly flat compared to the "lush" vibrant Windward... don't get me wrong Leeward is very good, but looks not as condensed or luscious with realism as the X-Plane 12 effects created in the eastern part of Tahiti. Bora Bora Airport Bora Bora Airport (NTTB, 1505 meters), also known as Motu Mute Airport, is an airport serving Bora Bora (Leeward Islands, Society Islands, French Polynesia) and handles about 300.000 passengers annually. The airport is located on the islet of Motu Mute and is served by Air Tahiti with ATR 42 and ATR 72 propjets Bora Bora Airport Aéroport de Bora Bora IATA: BOB - ICAO: NTTB 11/29 1,505m (4,938ft) Asphalt Elevation AMSL11 ft / 3 m Rustic and Polynesian, the excellent terminal building is not only for the air, but also a sea pier for servicing the hotels set out around the lagoon. The quaint Control Tower has housing and service buildings around it. Like at Moorea, there are a significant number of luxury Overwater bungalows at Bora Bora, and they are all set out around the lagoon areas, very evident, and the hotels existing here in Bora Bora are all replicated in detail. There are five Helipads set around the lagoon, mostly at the hotel sites. The one at "Tahiti Nui Helicopters Pago dropzone" is the base for the operations around the area. Tahiti Nui Helicopters Pago dropzone The hub of Tahiti Nui Helicopters on Bora Bora is located about 8 kilometers south of NTTB, XHNTTZ Four Seasons Helipad A helipad next to the Four Seasons Resort Bora Bora, about 6 kilometers south-east of NTTB, XHNTTF Saint Regis Helipad A helipad next to The St. Regis Bora Bora Resort, about 8 kilometers south-east of NTTB, XHNTTS Le Meridien Helipad A helipad is set next to Le Meridien Bora Bora, about 8 kilometers south- east of NTTB, XHNTTM InterContinental Helipad A helipad next to the InterContinental Bora Bora Resort, about 9 kilometers south-east of NTTB, XHNTTI Raiatea Airport Raiatea Airport, also known as Uturoa Airport, is an airport on Raiatea and handles about 245.000 passengers annually. Raiatea is the second largest island of the Society Islands, after Tahiti, and has an elevation of 1017 meters. In the north of Raiatea lies Tahaa, and the islands are enclosed by a single coral reef. Raiatea Airport IATA: RFP - ICAO: NTTR 07/25 1,200m (3,937ft) Asphalt Elevation AMSL6 ft / 2 m Set on the north coast of Raiatea, is Raiatea (Uturoa) Airport NTTR, the runway is actually on reclaimed land on the coral sea. Like all these Tahiti sceneries the airport quality is excellent. With very detailed South Pacific rustic buildings and feel... highly authentic. There is only one Helipad on Raiatea... Le Taha‘a Helipad A helipad next to the Le Taha‘a Island Resort, about 17 kilometers north-west of NTTR, XHNTTT Huahine Huahine measures 16 km (10 mi) in length, with a maximum width of 13 km (8 mi). It is made up of two main islands surrounded by a fringing coral reef with several islets, or motu. Huahine Nui (Big Huahine) lies to the north and Huahine Iti (Little Huahine) to the south. The total land area is 75 km2. The two islands are separated by a few hundred metres of water and joined by a sandspit at low tide. A small bridge was built to connect Huahine Nui and Huahine Iti. The Island's highest point is Turi, at 669 m elevation. Huahine – Fare Airport Huahine – Fare Airport is the airport serving the island of Huahine in French Polynesia. The airport is located in the northern part of the commune of Fare, on the Island of Huahine Fare, Huahine – Fare Airport IATA: HUH, ICAO: NTTH 07/25 1,500m (4,921ft) Asphalt Elevation AMSL7 ft / 2 m Unusually here it is a tiled roof not thatched on the Fare Airport terminal building, but still in a Polynesian style. Again the airport is extremely well done with separate tower and service buildings, it is easy to find from the air as well with it's position. Maupiti Maupiti is the westernmost volcanic island in the archipelago, 315 kilometres (196 miles) northwest of Tahiti and 40 kilometres (25 miles) west of Bora Bora. It has a population of 1,286 people. The largest town is Vaiea. The island is a "near atoll", consisting of a central volcanic peak surrounded by a lagoon and barrier reef with four motu: Auira, Pa'ao, Tuanai, Tiapaa and Pitiahe.  The lagoon has an area of 27 square kilometres (10 square miles) and the central island has an area of 12 square kilometres (4.6 square miles) and a maximum elevation of 372 metres (1,220 feet). Maupiti Airport Maupiti Airport is serving the island of Maupiti and the airport handles about 23.000 passengers annually. It is positioned on the Northeastern coast of the island. Maupiti is the westernmost volcanic high island in the archipelago. The 3136 ft runway 08/26, sticks right out into the surrounding waters, the locale is really well designed (and detailed) to discover. Maupiti Airport IATA: MAU - ICAO: NTTP 08/26 956m (3136ft) Asphalt Elevation AMSL15 ft / 5 m Maupiti Airport is another great gateway to paradise. Last and interesting in the Leeward Islands is... Tupai Tupai is also called Motu Iti, is a low-lying atoll in Society Islands, French Polynesia. It lies 19 km to the north of Bora Bora and belongs to the western Leeward Islands. This small atoll is only 11 km2 in size. Its broad coral reef encloses a shallow sandy lagoon. There are almost continuous long wooded motus on Tupai's reef. Tupai has no permanent residents apart from some workers in its coconut plantations. Tupai is a low-lying atoll and consists of two larger and a few smaller islands surrounding the lagoon. Tupai Airport is a private airfield on Tupai, inaugu- rated in 2001, and its use is restricted. It is noted as NTTU ICAO designator, there are no charts for the airfield. Of course all atolls and small coral islands throughout both packages are also all represented and customised with realistic water and landmass textures. There is also a a lot of vehicle traffic, and animated water traffic that gives off a buzz to the sceneries.... it is a very comprehensive set of sceneries, the best you could imagine for this "Exotic" part of the South Pacific. Lighting Lighting in these sort of packages is not the focus of the scenery... here it is of course basic island lighting. There is another element in looking at the night images to consider. X-Plane (12) and it's current state has not very refined lighting. It is all very over-exposed and quite large at their sources with large flares. So it isn't really very realistic? Here are my arrival images into Faa's NTAA Rwy 04. The lighting looks like cascading lava down the mountainsides? The airport PPT was actually quite hard to make out? The Faa's NTAA International lighting is perfectly fine, maybe a a better tone of light would have been more realistic... but overall it was good, but the external lighting sorta overwhelms it. The arrival globe lighting at the terminal's entrances are however a masterstroke. Papeete lighting is autogen(erated) but looks okay, the port area is very good. Moorea's lighting gives a more generalisation of the lighting across all the Windward Islands... typical island lighting, with no highlights. In the Leeward Package the lighting is the older XP11 system, and it actually looks far better, as the heavy XP12 flare is more contained. Bora Bora Airport is bright and very nicely lit and the whites, whiter. Highlights are the eerie blue glow of the Overwater hotel bungalows, snaking themselves out into the Lagoons... My advice is to revisit the packages if Laminar Research refines the lighting of X-Plane 12, you may be pleasantly surprised, as the current night-lighting is way overdue for attention in the Simulator. Summary "Society Islands" is a set of two packages by the renowned Maps2X-Plane, the same developer house that created both the excellent Faroe Islands, Svalbard and Seychelles XP, all the sceneries reviewed here are Maps2X-Plane releases, but released under the Aerosoft banner. The first was "Society Islands XP - Bora Bora & Leeward Islands", released now back in September 2021 for X-Plane 11, of which you could call the "Western" area. The second release is the newer one "Society Islands XP - Tahiti & Windward Islands", and again what you would call the "Eastern" area, both packages together then covers the whole Society Island territory. The Leeward scenery was slightly compromised in that it was only a regional scenery, with only local inter-island flying. This latest Windward package is significant because it adds in the main gateway or Faa'a International Airport, situated on the main island of Tahiti. This added aspect then connects all the Tahitian areas together, not only the international routes, but also the local domestic routes from the main gateway. The now combined area is also quite significantly wide to explore and to service. Tahiti & Windward Islands XP Package, includes the Tahiti Gateway of Faa‘a International Airport NTAA, and Papeete the capital of Tahiti, other islands and airports include Moorea Airport NTTM and Tetiaroa Airport NTTE (Brando Island), and three Heliports; Taaone NTHP, Taravao NTHV and Afareaitu NTHF. Bora Bora & Leeward Islands XP Package, includes Bora Bora Airport NTTB, Raiatea Airport NTTR, Huahine – Fare Airport NTTH, Maupiti Airport NTTP and Tupai Airport NTTU, a private airfield on Tupai. Heliports are five on Bora Bora; Tahiti Nui Helicopters Pago dropzone (XHNTTZ), Four Seasons Helipad (XHNTTF), Saint Regis Helipad (XHNTTS), Le Meridien Helipad (XHNTTM), InterContinental Helipad (XHNTTI), and on Raiatea is a Helipad at Le Taha‘a Resort (XHNTTT). Maps2X-Plane are masters at creating extensive custom terrain mesh with photo-realistic textures for the landscape and the sea. And all the extensive land and tropical sea elements are all covered here. All land autogen is (South Pacific) custom, and significant areas and island locale's are covered like Papeete and port areas. Airport vehicle and sea (water) traffic is also extensive. All airports including the Tahiti gateway Faa'a Airport are all extensively modeled and created, and the unique "South Sea Island" feel in the X-Plane 12 Simulator is very evident. Notable is that the older Bora Bora Leeward, does have still a lot of the older X-Plane 11 elements (older + trees and water) that doesn't have that later X-Plane 12 density and quality, Leeward is very, very good, but Windward is still better in feel and look. Lighting is actually the opposite, X-Plane 12 non-refined lighting is worse than the older but more stable X-Plane 11 lighting on the Bora Bora package. Notable is that both XP12 and XP11 versions are all included in the packages. In your face is the price, $36.99 for the older Bora Bora, and $38.99 for newer Tahiti... together $75.98 for scenery! Obviously an investment, but you get a lot of scenery including tons of detail and extensive features for your hard earned dollars. It's a brilliant set of flexible packages to use as well... now with International Long Haul available, regional island services, helicopter inter-island and hotel services, and even just cruising around exploring the islands in your floatplane, every aspect is covered, and it all comes with a huge quality impact and the immense detail of custom terrain and noted photo-quality base mesh, as a travelogue it is all an explorers delight. Overall, it is the excellent "South Pacific" feel that is the immense drawcard to the Tahitian scenery, can a simulator recreate the realism of the real world, well almost and these sets of Tahitian Sceneries show off the immense talents of X-Plane 12, its all so close, you can now almost touch it with these packages.... Highly Recommended. ______________________ Yes! the Society Islands XP - Tahiti & Windward Islands, Society Islands XP - Bora Bora & Leeward Islands by Aerosoft is now available from the X-Plane.Org Store here : Society Islands XP - Tahiti & Windward Islands Price is US$38.99 Requirements X-Plane 12 or X-Plane 11 Windows, Mac and Linux 4 GB VRAM Video Card - 8 GB+ VRAM Recommended Download Size: 5.7 GB - Installation is done through Aerosoft One Current version: 1.1 (January 26th 2024) Society Islands XP - Bora Bora & Leeward Islands Price is US$36.99 Requirements X-Plane 12 or X-Plane 11 Windows, Mac and Linux 4 GB VRAM Video Card - 8 GB+ VRAM Recommended Download Size: 5.7 GB - Installation is done through Aerosoft One Current version: 1.1 (December 12th 2022) ___________________________ Installation Installation of Tahiti/Bora Bora XP is done through Aerosoft one installer: Aerosoft One Universal After you have installed Aerosoft One, click on ENTER PRODUCT KEY (under the Library Tab) ... enter the Serial Number provided in this order. This will give you the option to download the airport. Note the different X-Plane 11 and X-Plane 12 installations. The Tahiti/Bora Bora scenery is downloaded into a dedicated folder "Aerosoft One Library" on your system, under a file (gameDirectory) via a shortcut. Full Install size (both packages) is 15.34Gb. Documents Standard Aerosoft Manuals Tahiti (9 pages), Bora Bora (22 pages) are in both English and German. Review System Specifications Windows - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD Software: - Windows 11 Pro - X-Plane 12.07r1 (This is a Release Candidate review). Plugins: Traffic Global - JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 Scenery or Aircraft -ToLiss A321 XP12 - (X-Plane.orgStore) US$89.99 - Cessna 172-1000 - X-Plane Default fleet - Free (with X-Plane 12) -ATR72-500 v1.2 - Riviere 1.2.0 - - (X-Plane.org) - Free Tahiti Scenery Review by Stephen Dutton 18th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  15. NEWS! - Scenery Released : LFKF -Figari, Corsica XP12 by FSX3D Only a week or so ago, prominent Flight Simulator 2020 developer FSX3D released their first X-Plane 12 scenery, this was LFKC - Sainte-Catherine Airport on Corsica. Here is already another Corsican scenery released from FSX3D in LFKF -Figari, Corsica XP12. Located in Figari, near Porto-Vecchio (20km) and Bonifacio (15km), this aerodrome is open to traffic national and international commercial flights, scheduled or not, private aircraft, instrument flights and sight flights. Making it the third largest airport in Corsica after the airports of Ajaccio and Bastia1. In 2016, the airport served 639,916 passengers (now over 700,000), representing an increase of 9.2% compared to 2015. Features Included Ultra detailed car parks, taxiways and track PBR on all objects Ambient occlusion (Objects and ground) Wet track effects Dynamic lighting Animated Radar Pylon Altimeter patch for Ortho4XP Compatibility AutoOrtho Like LFKC Sainte-Catherine Airport, this LFKF Figari is very well value priced at a reasonable US$14.99. This scenery is only available in the X-Plane 12 option. Corsica is finally getting a lot of attention via these excellent releases... check them both out now. Images are courtesy of FSX3D _______________________________ LFKF -Figari, Corsica XP12 by FSX3D is now available from the X-Plane.Org Store here: LFKF -Figari, Corsica XP12 Price is US$14.99 Requirements X-Plane 12 Windows, Mac or Linux 8 GB VRAM Minimum Download Size: 815 MB Current version : 1.1 (Mar 15th 2024) ___________________________ News! by Stephen Dutton 16th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  16. Scenery Review: X01 - Everglades Airpark, Florida by Skytitude By Felicity Smith Introduction As a young girl, I remember rushing home after school to immerse myself in the adventures of Mark, his dad, and Gentle Ben, gliding effortlessly on their airboat through the Everglades in the television series 'Gentle Ben.' Those reruns transported me to a world filled with simplicity and joy, a feeling I’ve cherished into adulthood. So, when Everglades Airpark popped up on the Org store, and hubby suggested I take a look, I thought, why not! Everglades Airpark, located a mile southwest of Everglades City in Collier County, Florida, is more than just a hub for aviation activities; it's a portal to the expansive 10,000 islands that dot the region. Yes, an astounding 10,000! This strategic position offers virtual pilots a scenic base that perfectly captures the essence and beauty of the Everglades. Installation and Documentation Users are provided with two zip files, one tailored for X-Plane 12 and the other for X-Plane 11, to ensure compatibility regardless of the version they are using. The files are compact, with the download size being just over 160MB and expanding slightly to around 170MB once extracted. The installation process involves simply transferring the two folders into your Custom Scenery folder, making it as straightforward as preparing for takeoff. Documentation comes in the form of a modest text document. It's simple yet effective, providing all the essential information needed for installation. First Impressions My first flight over Everglades Airpark in X-Plane was truly eye-opening. For those who haven't had the opportunity to visit this part of the world, the expansive view of countless islands and mangroves is striking. The scenery offers depth with its myriad of islands and islets, presenting a rich tapestry for exploration. While it's uncertain if every single island has been individually modeled, the contrast to X-Plane's more generic landscapes is notable. The enhancements made to the bathymetry data through the edited mesh significantly smooth out the dips and rises in water surfaces that X-Plane sometimes exhibits. This adjustment leads to a more realistic experience, especially noticeable when flying at low altitudes, by mitigating the visual disruptions caused by these inconsistencies As you fly over the airpark, the detailing becomes even more apparent. A custom photographic overlay enhances the realism of the airport and its surroundings, making aspects such as the runway and the nearby Chokoloskee Bay appear more lifelike. Furthermore, the overlay extends over the water, effectively using different shades of blue to indicate variations in water depth. Everglades Airpark Approaching Everglades Airpark reveals that its charm lies in the subtle details rather than grandiosity. The developer has achieved a near perfect balance with the custom foliage, including shrubs, trees, and 3D grass, which are distributed in a way that creates a scene that is neither barren nor overcrowded. Combined with X-Plane's ambient nature sounds, the setting attains an immersive quality that is both pleasing and authentic. The runway itself features textures that realistically reflect wear and tear. The addition of what appears to be windblown sand across areas of the runway further enhances its visual fidelity and acknowledges the airpark's proximity to the coastline. Runway markings, as you would expect, are minimal, displaying only the essential numbers and the airport’s frequency, which underscores the airpark's practical, no-frills ethos. In terms of structures, the airpark reflects its real-world counterpart’s modesty with just a few buildings. The main hangar, serving as a shelter for small single-engine GA aircraft, and the main ticket office, which modestly functions beyond what might typically be called a terminal, are notable for their modelling. The inclusion of 3D figures around the ticket office adds a touch of life to the scenery, a detail that enhances realism. A parking area, a small water tower, and various pieces of airport clutter fill out the scene. While the airpark does not boast a wide range of structures, each element is thoughtfully placed, enriching the overall experience without overstimulating the senses. Everglades City Northward from the airpark, one encounters Everglades City, a charmingly small community that, despite its name, is home to fewer than four hundred residents. The city’s layout, with its orderly grid of streets, hosts a variety of residential and commercial structures. These are integrated into the scenery with a photographic overlay that, while not achieving razor-sharp clarity, marks a modest step up from the default textures provided by X-Plane. The waterfront, with its array of docks and jetties complemented by a selection of default boats, melds surprisingly well into the surroundings. Chokoloskee Island Chokoloskee Island, situated further south and connected to the mainland by a three-mile-long causeway, adds a serene element to the scenery. Its numerous buildings and static caravans, integrated using a photographic overlay, had the potential to be a standout feature. Unfortunately, the use of low-resolution imagery here undermines this potential. Given the relatively small size of the download package, it seems there was an opportunity for the developers to incorporate higher resolution textures without a significant increase in file size. At a time when users are generally receptive to downloading larger files for enhanced realism, the decision to keep the file size modest may limit the visual fidelity of these areas. Upgrading to higher resolution textures could have notably improved the immersive quality of Chokoloskee Island, transforming it into a more engaging part of the Everglades Airpark experience. The present resolution, particularly at lower altitudes, detracts from the scenery's potential to fully captivate virtual pilots with the natural beauty and detailed landscape that this unique region deserves. Night Lighting The night lighting at Everglades Airpark, though modest, captures the essence of what you'd expect from a small general aviation airport such as this. It's not so much about the dazzle but the fit, and in this case, the lighting strikes a pleasant balance. The gentle illumination of the main office building, coupled with the streetlights weaving through Everglades City, creates a serene and realistic nocturnal setting. It’s subtle, yet thoughtfully implemented, providing just enough light to navigate without overpowering the quiet beauty of the surrounding area. Performance Given that my computer is typically more engaged with games like “Hogwarts Legacy” and “Age of Empires” rather than the highly detailed and demanding environment of X-Plane 12, I approached this scenery with a measure of apprehension. To my pleasant surprise, the performance across Everglades Airpark was impressively smooth. The only moment I encountered a slight slowdown was when X-Plane 12’s default trees, especially animated ones in windy conditions, began to accumulate, leading to a minor drop in frame rates. However, for those who, like me, find the trees from X-Plane 11 more than satisfactory, switching back to these in the graphics menu is an option. Overall, the scenery performed excellently, free from stutter and maintaining a good performance level throughout. Conclusion In reviewing Everglades Airpark, I've found an experience that captures the simplicity and authenticity of the real Everglades, albeit on a somewhat modest scale. The scenery shines in depicting the main airport and its immediate vicinity, with its upgraded mesh, realistically modelled main airport building, and a genuine sense of place that truly embodies the spirit of this distinctive location. However, there is room for improvement, particularly the lower-resolution overlays in the urban settings near the airport. While these aspects don’t entirely detract from the overall enjoyment, they do present a clear avenue for enhancement that could elevate the scenery to more closely match the vividness and detail of its real-world inspiration. Weighing the scenery’s modest intentions against its successes, it stands out as a rewarding exploration for those captivated by the charm of the Everglades. With an accessible price point, it offers a compelling option for virtual pilots in search of new adventures, set within a context that doesn't aim for overwhelming grandeur but rather a heartfelt tribute to a beloved region. ________________________ X01 - Everglades Airpark, Florida by Skytitude is now available from the X-Plane.Org Store here: Everglades Airpark Priced at $12.95 Features Complete and accurate representation of Everglades Airpark Highly Detailed areas of Everglades City, Chokoloskee Island and ten thousand Islands for greater VFR Custom Materials and Surfaces with Physical-Based Rendering Effect (PBR) Wet Surfaces Using New X-Plane 12 Weather Technology Spectacular Buildings and Objects with Realistic Night Lighting High Density Hand-Placed Forests and Plants Custom 3D Grass Using New X-Plane 12 Vegetation Technology Accurately Built Large Surrounding Area with Thousands of Hand-Placed Objects Edited mesh for +25-082 tile, a lot of bathymetry data problems fixed Requirements X-Plane 12 or X-Plane 11 Windows, Mac, or Linux Download Size: 163 MB Current version: XP 12 1.0 (Jan 24th, 2024) Review System Specifications AMD R5 2600 – 16GB RAM - Nvidia RTX 2060 – Windows 10 Home 64 Bit __________________________________ Scenery Review by Felicity Smith 15th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copying of the content is allowed without consent from the author as per copyright conditions). =
  17. NEWS! - Scenery Upgraded : KDCA Washington Airport & City XP12 by Drzewiecki Design The Polish developer Drzewiecki Design have upgraded their "Washington DC" scenery to X-Plane 12. This scenery includes not only the extensive Washington DC Cityscape, but also the nearby Ronald Reagan Washington National Airport - KDCA, or it's old name in "National Airport", or simply "DCA". As this is an upgrade to X-Plane 12, it is priced at the full price, however at this point in time there is a US$5 saving on the scenery, great value anyway. X-PlaneReviews did a review coverage of the original Drzewiecki Design 2017 release of the Cityscape Washington DC: City Scenery Review : Washington XP by Drzewiecki Design Notable is that added to the upgraded KDCA National, is the now included more detailed terminal internal areas from the XP11 version, detail overall is also more highly developed including SAM airbridges, and all the lighting effects (city/airport) are now XP12. So this new release is not just a carbon copy of the original XP11 release. Other (lite) airports included in the package are: KADW Joint Base Andrews, KCGS College Park Airport, KVKX Potomac Airfield and W32 Washington Executive Airport. Helipads included are: White House, KJPN Pentagon Army Heliport, KBOF Joint Base Anacostia–Bolling, Sibley Memorial Hospital are all positioned over the Potomac in Maryland southeast of the central Washington area. Washington, D.C. was founded in 1791 to serve as the new national capital. In 1791, President Washington commissioned Pierre (Peter) Charles L'Enfant, a French-born architect and city planner, to design the new capital. He enlisted Scottish surveyor Alexander Ralston helped layout the city plan. The L'Enfant Plan featured broad streets and avenues radiating out from rectangles, providing room for open space and landscaping. He based his design on plans of cities such as Paris, Amsterdam, Karlsruhe, and Milan that Thomas Jefferson had sent to him. Ronald Reagan Washington National Airport (IATA: DCA, ICAO: KDCA, FAA LID: DCA), is located in Arlington, Virginia, next to the border of Washington, D.C. It is the smaller of two airports operated by the Metropolitan Washington Airports Authority that serve the National Capital Region around Washington. The airport is 5 miles (8.0 km) from downtown Washington D.C.. The airport's original name was Washington National Airport. Scenery Features A high-quality model of KDCA Ronald Reagan Washington National Airport, featuring the up-to-date version with extensive details throughout the whole airport FPS-friendly design, with epic night textures, dynamic lighting and PBR materials Performance-friendly interior modeling at terminal buildings, control towers, and some hangars, static aircraft, advanced night lighting (incl. River Visual and dual PAPI), animated trains Animated jetways, VGDS, marshallers (SAM plugin) Washington D.C. city scenery included, with over a thousand landmark buildings surrounding the airport, ortho coverage and some lite airports Images are courtesy of Drzewiecki Design _______________________________ KDCA Washington Airport & City XP12 by Drzewiecki Design is available from the X-Plane.Org Store here: KDCA Washington Airport & City XP12 Price is US$30.00 Currently US$25.00 You Save: $5.00(17%) Requirements X-Plane 12 Windows, Mac, Linux 8 GB+ VRAM highly Recommended Download size: 1.5 GB Current version: 1.0 (March 14th 2024) ___________________________ News by Stephen Dutton 15th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  18. Classic Aircraft Review Updated : Aircruiser 66-75 v1.1 by Hangar 23 Very early classic aircraft are very interesting, more so when they are so rare. This aircraft is about as rare as you could could imagine, only 23 of them were built between 1930 and 1938. But they have a significant place in Aviation history, only to be replaced by the United States federal regulations that prohibited single-engine transports on United States airlines, virtually eliminating future markets for the Aircruiser. Bellanca Aircruiser and Airbus were high-wing, single-engine aircraft built by Bellanca Aircraft Corporation of New Castle, Delaware. The aircraft was built as a "workhorse" intended for use as a passenger or cargo aircraft. It was available with wheels, floats or skis. The aircraft was powered by either a Wright Cyclone or Pratt or a Whitney Hornet engine. The Airbus and Aircruiser served as both commercial and military transports. The first Bellanca Airbus was built in 1930 as the P-100. An efficient design, it was capable of carrying 12 to 14 passengers depending on the cabin interior configuration, with later versions carrying up to 15. The Aircruiser's distinctive shape, gave it the moniker of "The Flying Ws" and this hardy design was still flying in Canada well into the 1970's . Is it a Bi-Plane, sort of, as the lower W is still a part aerodynamic surface. When you look at the design closely, it is extremely clever in holding up and bracing the main wing, as for also being a support for the landing wheels. The Aircruiser is a "Tail-Dragger", most were back in this 1930's period, but the early evolution of the multi-seat passenger aircraft is highly perceivable, back in the day, it was, still is a very innovative design. For an aircraft, it looks heavy, but sturdy is probably the best description Hangar 23 is a not really a new entrant to the X-Plane Developers affiliation, but a ex-TorqueSim developer. Still the Aircruiser is an interesting one in the choice of aircraft to debut their talents in doing their own Studio. Technical information of the Aircruiser is rare, but there are two surviving in existence, "CF-BTW," a 1938 model in the Ericson Collection in Madras, Oregon, incredibly the aircraft is still airworthy. The second is "CF-AWR" named the "Eldorado Radium Silver Express", built in 1935, and is under restoration at the Western Canada Aviation Museum in Winnipeg, Manitoba. Update v1.1... This review has been updated to version v1.1, this includes a set of changes that came out only a few weeks after this original release review was published, the changes are noted here v1.1 Installation The download for the Aircruiser is 1.18GB, with an installation of 1.38Gb. But the installation file/folder system is a slightly complicated. Hangar 23 has selected to put the main Aircruiser file within a folder of a folder? So the first folder is "Aircraft" followed by a folder named "Hangar 23" , with the actual "Aircruiser" aircraft folder inside, or buried in layers of folders? Honestly the first "Aircraft" folder is not required, so just install the "Hangar 23" Folder directly into your X-Plane "Aircraft" folder with the Aircruiser folder inside. All the installation notes are in the excellent manual, but the doubled up "Aircraft" folder creates confusion... Detail and modeling For an aircraft of this size, an installation size of 1.38Gb can only mean one thing, quality in detail. Remember this is a first time effort from Hangar 23, but the detail and quality is outstanding. Both an X-Plane 12 and X-Plane 11 versions are included in the package, but it is the XP12 version on show here with it's more exponential PBR (Physical Based Rendering) effects and lighting. And it really blows you away. X-PlaneReviews are usually quite lenient when the studio name is new, in overlooking sometimes even the obvious mistakes or poor areas of first time production... But already with the quality of work behind Ulrich, you go straight into the "Masters" level, but this is still a first release from Hangar 23 is just outstanding... and an highly impressive debut for the Studio! And all with an aircraft so rare... the beauty of Simulation is that iconic and classical aircraft can be recreated, their forgotten time, brought back and to live again, or in this case fly again. At the core of this Aircruiser Simulation is just that very aspect, bringing the past alive again for you to absorb and interact with. But this is outstanding work... all the wing braces and support wires are sensationally done, every bolt, castle nut and Cotter Split Pins, are modeled here in detail, leading edge panels are worn and authentic, the struts in detail are excellent, you have to admire it all. If you are a detail junkie, who loves to spend time investigating the quality of the work, then you will love this aircraft, as it's a museum piece brought alive. The massive top wing looks canvas, and you can see the frame that the material covers, it's a lovely formed wing as well. Actually two separate wings, attached to the fuselage. This was the golden age of innovation for aircraft, the transition from wood, canvas to metal, so you get sometimes the mixture of the two eras in the one development as the changes moved on forward. The detail is just gobsmacking. The panels are perfect and so are the bolts that hold them in place, windows and it's thick glass are worn and glazed to perfection... The Cyclone SGR-1820 it is rated at 760 hp, as is the giant three-bladed geared propeller, and all gloriously there to admire. The engines internal intricate detail of metal and brass pipework is very impressive. The Aircruiser is flat sided, there are no curves in the doors and the windows are more nautical portholes than aircraft, but it's all beautifully done, and it is all built like a tank! The two main landing wheels hubs, tyres are massive, but simplistic as well, detail is right down to large CirClip to hold the rim onto the hub. There are four doors that can be opened, two small high cockpit access doors, one left passenger door, and a very big odd A shaped cargo door... all four doors are so authentic to the design, with the Cargo door in two sections that folds. Honestly, it is like a flying shed inside, totally weird. The interior is impressively done, metal and wood dominate, SO much weight in the construction, how did this thing get off the ground? It's all metal piping and blocks of wood, many trees were felled in the creation of the interior, a far, far cry from the ultra clean, state-of-the-art LED lighting Airbus interiors... this is doing it rough. The passenger seats are a pipeframe, with a strung canvas seat, you wouldn't want to go to far on them. Pilot seats are a metal bucket, the pilot gets the luxury of a cushion, the CoPilot the hard metal base. The cushion is required not for comfort, but to be elevated to see over the extremely high instrument panel. The yoke is a big hefty iron thing, beautifully skillfully designed and modeled, you can hide it via a hotspot centre yoke. The side quadrant is again excellent, with the Throttle (T), Propeller (P) and Mixture (M) levers, notable that in 90 years the controls are still as relevant then as now. Lower rudder pedals are also big hefty iron contraptions, you need to be Popeye with his strong arms and legs to match, to fly the Aircruiser. Notable are the two trim winders, one left for pitch/elevator adjustment, and another on the forward roof for the rudder trim. Point to make is that there is no visual trim setting, so you don't know if they are both centred or not, but a guide is two full winder rotations each way. Note the old fashioned brake lever and flap selector handle. -v1.1- in the update Hangar 23 added in a visual marker on to both of the trim winder panels, it's only a small round brass tack, but it does show you your current trim position. Main instrument panel is amazing, this is simply a panel with inset instruments that is highly authentic. Note the boxed Whiskey Compass Again the layout is quite familiar... with a Standard Six layout. Top left is the Airspeed Indicator (MPH/KNTS), Vertical Speed Indicator (V/S), very basic Rate of Turn Indicator, below offset is a Directional Vacuum Gyro (Heading), Altmeter and Horizontal Reference (bank). Far left is a RPM dial, Manifold Pressure, and top right a CYL TEMP. Right panel has Volts, OAT (Outside AirPressure), Oil Temp/Pressure and Fuel Pressure... top Ignition Switch, Fuel Gauges (twin), PPH (Pounds Per Hour) fuel flow and a ELGIN clock. Lower left are a row of switches that cover Battery, Generator, Nav (lights), Landing (light), Starter, Coil Booster, Fuel Pump, Panel Lights and Cabin Light. Far, far left is the fuel tank cock; Both, Left & Right. It's all so impressively well done, the flaked tired black metal facia is very authentic to an aged old aircraft of this generation. - Update v1.1 - Added in the update were two instrument items both related to the "Carburettor Heat". A knob lower dash, and a gauge middle panel centre right. Menu There is a banner menu "Hangar23Aircruiser" that has two menu options; "Options" and "GPS Style" Options: There are six options, Autopilot Toggle, Strain Gauge Toggle, Real Autorudder Toggle, Steerable Tailwheel, Show Pilot and Use Clipboard. The Aircruiser comes with a very basic 2-Axis "Sparrow" Autopilot, basically a set "Holds" Pitch and Roll Rate. Second option is to add on a "Strain Gauge" or Trim indicator. Both are positioned lower centre panel We will go more into the "AutoRudder" in flight, but if you want to disconnect or activate the the AutoRudder you can do so via the menu option, you can also use the hotspot on the (front) Whiskey Compass to do the same action. The Tailwheel is steerable by the rudder pedals, but if you want a free castoring wheel, you can disconnect it via the "Steerable Tailwheel" option. There is the option to show or hide the pilot. He is fully animated in rudder and pitch (forwards & backwards) and seems to have his hands full in controlling the aircraft, he is very good here and well done. Next in the "options" menu is the "Use Clipboard". In the right side pocket there is a VR (Virtual Reality) clipboard (also clickable). This really the "Fuel & Weights" menu... as you can adjust the fuel and Pilots, Passenger, Cargo weights by scrolling them in. They can be set in Lbs or Kgs and the "Load", "Empty" (weight) and Full Gross weight can be seen. You can "Save" your settings, and then "Load" them. Another note is that between flights the Aircruiser will save and reload the same settings to the next flight, until you adjust them. Last two separate items on the "Options" menu are "Reset AP Tuning" (Autopilot on/off) and "Reset AutoRudder Tuning", resets the rudder position to central. An option not shown in the menus, is that if the power is switched off, then the chocks are positioned on the front wheels. The second setting of the menu tab is the "GPS Style", here you can select between the Laminar GNS 530 GPS, or one of the two RXP (Realistic) GNS 530 or GNS 750 GPS units if you have that external additional option. I don't have the Realistic option so that install is not visible here. The GPS units are position on the roof forward, with also a default custom style COMM radio above, and a Transponder panel below. - Update v1.1 - Introduced a set of "Floats" for the aircraft. There was actually a Float version of the Aircruiser, notably two aircraft were converted... noted here as a "Floatplane". The "Float" version can be selected on the "Flight Configuration" menu. "Huge" and chunky floats they are, there is no Amphibian variant (land wheels) The waterborne Aircruiser sits nicely on the water, also moves around on the fluids really well considering the size and weight of the machine. You need those extra huge extra tail fins to keep the aircraft straight. There are several ways to control the water rudder up/down movement. One (the easiest) is to set a keyboard command to "Toggle water rudder", or use the pull (up) or (down) slider on the floor, left behind the flap lever. Water rudder steerage is via your rudder pedals. Float detail is like the rest of the aircraft, exceptionally well done, lovely cleats and perfect cables ____________ Flying the Aircruiser 66-75 You can't at all see out of the Aircruiser, the long nose is way up there, blocking any view, as the tail is way back down there behind you. The only option is to lean very far left to try to see the ground. You would think the Aircruiser being so old-fashioned would be a pain to start, but it's quite benign and easy as long as you do the right procedure. Fuel on "Both", Fuel Pump on, then the most important switch, the "Boost Coil" switch to on. Mixture just to above the (Auto) lean red marker... then up the "Starter" switch, the prop will turn, then gradually fire into a running engine... Both the start up and shutdown of the Cyclone SGR-1820 is exceptional, no fast artificial start or shut down here, but it all comes with stutters and engine positions that are very noticeable, as is the churn of the starter motor against the pressures "clock", "clocking" of the starting engine, its a great and a very realistic re-enactment of the starting, and then the stutter of the engine shutting down, I loved it. I have a horrible history of trying to control tail-draggers, spinning loose tail-wheels have given me loads of grief. But not here though... as mentioned you can disconnect the tail-wheel to be free, if you love that uncontrollable chaos. But for the rest of us the tail-wheel acts through the rudder pedals, but also through the usual "Tiller" yaw. This makes the Aircruiser very easy to manoeuvre around on the ground or on taxiways. Braking and the toe-brakes work normally as well. For once you not fighting the aircraft on the ground to go into the direction you want, but the view internally is hard work to keep it all on the narrow taxiway. So you have a habit of visually taxiing externally until you understand the aircraft more. Very important is to adjust the rudder trim 50%, or a full winder turn to the right. The SGR-1820 is a very powerful force on takeoff, the asymmetric thrust is huge, it pulls you so hard to the left, that even full rudder is required off the line... The Aircruiser for all it's massive weight is sprightly off the line, your working the pedals to find the right balance to keep the aircraft straight, it does thankfully nicely change direction tail-wise to your inputs, very quickly the tail is up at 40 MPH, and there is tons of lift from those wings, at 60 MPH+ and your now flying. The point from "off the line" to "Airborne" is very short, so no flaps are required, time to adjust your direction is short as well... so once off the ground I was already veering right away from the runway, I didn't try to correct it, but just went with the flow and climbing turn, then leveled it all out straighter when higher. With practise with your rudder inputs you could keep it in more of a straight line out... it's a total feel thing, a feel for the aircraft. Pitch trimming is nice, but I recommend a keyboard input than the badly positioned side wall-winder, same for the rudder trim on the roof... You have so much power, the Aircruiser is super fast for an aircraft of this size and age... it's a very physical aircraft to fly, you use the rudder all the time, then finally finding the right amount of input to keep the aircraft in a straight line, a tough idea, with the amount of asymmetric thrust coming at you all the time. The 66-75, as featured here, could produce up to 730 hp from sea level through 5800 ft, where then the power built higher to ~760 hp Maximum speed is 144 kn (165 mph, 266 km/h), (but it feels far faster), Range is an amazing 608 nmi (700 mi, 1,130 km), and the Service ceiling is 22,000 ft (6,700 m), but the average cruising altitude is around 10,000ft, still fast and high for a 90 year old design. Hangar 23 has provided a tool, called the "AutoRudder function", a sort of A.I. tool to take the strain out of flying the Aircruiser. On the ground the rudder control functions as usual. So it was important to properly trim the aircraft prior to takeoff and landing. In flight, the autorudder system then takes control of the rudder, and will attempt to keep a slip angle as dictated by the yaw axis of the joystick. This allows the pilot to slip the aircraft even while the autorudder is active, such that even crosswind operations become possible with the system active. In other words it flies like the X-Plane tool when you have no yaw axis joystick, the wings are connected to the rudder. This gauge will merely prompts the pilot on the direction of trim needed to take load off the “servos”. Unlike the autopilot, the autorudder does not disconnect under a high strain, nor is it dependent upon the aircraft’s electrical system to operate (Cable operation). When activated (via the menu, or Compass) the autorudder has a visible gauge, located on the yaw trim handle base plate. If you are going to deactivate the autorudder during normal flight, first adjust the rudder trim according to the strain gauge, otherwise a very sudden and very unpleasant disconnection will occur. It works very well... but switched off the AirCruiser has a habit of yawing left, almost going around in circles.... You can try to trim it out? but it's hard to find a neutral flight, I did find a position input that worked, slight right rudder and slight stick right as well, but it's tiring for any distance, short or long... the AutoPilot is not much better, tricky to use is to centre the heading. You adjust via the "Roll" or "Up/Dn" switches, as per the three lights, red (left), white (centre) and green (right). But there is a delay in the operation that can make you over trim, I never quite mastered it... so again even on the Autopilot, I went into a slight bank in left handed circles and couldn't the aircraft fly in a straight line unless under manual control. It's the sort of tool that all of a sudden you will understand it and get it right, with time and persistence. This system is like the Sperry Type A-3A. You will need to trim the aircraft perfectly, so the heading is as close to where you want to go and level, flying as straight as you can, then turn on the AP, trying to trim later while the Autopilot is active is a far harder situation. -v1.1- In the update a lot of attention was given to pitch stability and improved rudder response, also this adjustment also works better with the "Sparrow" Autopilot, in both manual and automatic orientations the aircraft felt far more stable, more directional, than with the past banking action... certainly a big improvement in this area. Lighting Lighting internally and externally is basic, which is to be expected. There is one switch for the instrument lights, and another switch for the cabin lights, two spider-web looking ones forward and two roof lights rear, it all looks quite nice at night... The GPS install looks bright and also odd in this old cabin, but it's very well done and easy to use. Externally there are only again two light switches... Navigation, red, green and white tail, the other light is a left wing mounted Landing light, that look and is quite effective. There are no strobes or beacon lights on the aircraft... Flight notes by Hangar 23 notes "DAY - NIGHT* - VFR... *Poor visibility and the antiquated aircraft lighting scheme will present additional challenges during night flights". In other words it is not really an aircraft to be flown in the dark... Sounds... are a bit of a mixed bag. Overall they are excellent, the startup is an aural experience, and so is shutdown, external engine noises are very good right through the range of power outputs, that's the good. The poor is the buzzy interior sounds, that have a sameness of a consistent droning buzz with no fluctuations, even over a short distance I was distracted or even bored with the noise, The Aircruiser maybe really like that in the air, but I didn't really connect with them. The lower power outputs (on the throttle) are however better. Notable is the Aircruiser engine’s 16:11 gear ratio, for the propeller spins slower than the engine, but all readouts and aural sounds are based on the engine and adjustments should be made according to engine state rather than calculated propeller RPM. -v1.1- There was a lot of attention to sounds in the v1.1 update... there was improved cockpit sound origins and changed FMOD engine sounds (which both will be updated incrementally going forward as improvements happen). The developer was at least very responsive to comments, this area certainly needed more better aural sounds. Time to head back to Shoreham (EGKA). A tricky place to lineup, for the mass of trees around the field. All the runways are hidden from view... .... if the system is active on final approach, the autorudder will check if the rudder trim has been appropriately set for the upcoming power reduction. If the trim is not suitably centered, the system will intervene and reset the rudder trim to near center. This may be noted by the clicking of the trim’s chain drive, as well as a mild rolling tendency during finals. Myself I turned the automation off to feel the aircraft on the approach phase, plus a single wind of the rudder trim, to reset it as it was on the takeoff phase. The handling felt normal, as did the approach. If however the autorudder is active, then it will disconnect on landing. Nose up to rub off the speed, as there is no "white flap use zone", I guessed in setting the flaps to below 100 MPH, actually below 90 MPH, and you get a slight lift on each extension... but the transition now down to 80MPH with now a slight descent into Shoreham it all felt perfect. The flap lever or floor handle is extremely well done. It's both a brake handle and Flap handle in one. Over the coastline, and there is still no visual on the runways. Then finally the field is in view.... so I drop, in also trying to miss the treeline. ... but I realise I am too high, and becoming too fast in trying to get down to the grass strip. It's still a very good try.... but I have to abort and climb out! I will note the throttle inputs. If the Aircruiser is trimmed (correctly, or well). The Throttle control is very, very good, as you can control the height via the power. Full power to climb out was excellent (after that slight delay), but I found the Aircruiser to be quite normal in the approach/landing phase as any other heavy single-engined General Aviation aircraft. However you have to be aware of the weight around you with using the throttle power, and that tendency to yaw right with the huge power increase, but you soon adapt to the characteristics and the personality of the aircraft... fun? yes immensely, also a challenge to get the skills right in this cockpit. I didn't want to lose sight of the field layout, now I had found it. So it was a tight turn around back to the other opposite threshold. But be aware that too tight a bank and the Aircruiser will slip badly and lose height towards the lowered wing, there a sweet spot to find in the bank and before the slip starts to emerge, all this is required to get the best rotation of the aircraft. Lower and slower this time.... and it feels right. Then slowly descend, descend "keep it steady" and I touch around 65 MPH, I am not to worried about the speed, as the Aircruiser on grass will dramatically drag itself slower. Toe brakes are still the best tool to stop the aircraft rotating hard right, then left on you, as this happens once the tail goes down, it's tricky, but with practise it works in keeping you straight... I'm down, and arrested before the end of the grass strip... not bad I say. Liveries There are six liveries, one Blank (default), and two liveries that are blank white, but one has a metal nose cover, and another has the same metal nose cover & metal tanks. All are nostalgic except the off soft purple Landmark? _____________ Summary Extremely rare aircraft are always interesting, this Bellanca Aircruiser or Airbus, is one of the rarest as only 23 aircraft were built between 1930 -1938, it is also the famed "The Flying W" and this hardy design was still flying in Canada well into the 1970's. Hangar 23 is a not really a new entrant to the X-Plane Developers affiliation, but a ex-TorqueSim developer. And this unusual rare aircraft is their first project for the newly-named studio and the X-Plane Simulator. The Aircruiser is available as two separate packages for both X-Plane 12 (as shown here) and X-Plane 11. The quality here with the Hangar 23 Bellanca aircraft is very much on show, as it is highly developed and polished. Modeling is absolutely first rate and the detail is highlighted by this experienced and mature developer. As the aircraft is so rare, the detail in the reproduction is simply outstanding, to the point of recreating an era from a long time ago, and with a couple of modern tools thrown in as well, but not to the distraction of the authenticity of the original aircraft. Obviously this is a project of a labour of love, but still delivered with quality and polish. It is old fashioned in design, but the Aircruiser comes with so modern helpers like a "Sparrow" 2-Axis Autopilot, a custom AutoRudder feature, and GNS 530 GPS, and the option for Realistic RXP GNS 530 or GNS 750 GPS units. Tail-Wheel control can be via X-Plane style commands or free-castoring, that makes this aircraft easy for first time Tail-Dragger aircraft learning. Other options include Strain Gauges, Steerable Tailwheel, a fully animated Pilot and Clipboard with a Weights & Balance menu. The Aircruisers unorthodox design does make it a challenge to fly, but I have had far worse and more difficult machines to cope with in the past. The helpers of course help, but once you master that huge powerful force forward, the "Shed" like design is oddly very nice and involving to fly. I usually despise Tail-Draggers, but loved the Aircruiser quite a lot, no, a really lot more. The quality performance and well thought out physics, do bring the totally unique experience alive. Added was a significant update a few weeks after the initial release. This was v1.1, and it included aircraft "Floats", brass markers for the trims, carburettor heat knob and gauge, better sounds and better flight dynamics with improved pitch stability and rudder response. Also added for convenience was the Skunkcrafts Updater. It is certainly a huge credit to the skills of the developer of what they have delivered here, certainly it is a very unique Simulation, but totally authentic as well, Secondly the release also shows off X-Plane 12's excellent dynamics and quality lighting. The Aircruiser 66-75 is very rare, but you can absorb yourself in this 1930's Golden Era of Aviation, and this aircraft is highly relatable to the same machine created over 90 Years ago.... Highly Recommended. ________________ The Aircruiser 66-75 v1.1 by Hangar 23 is now available from the X-Plane.OrgStore!... Here: Aircruiser 66-75 Price is US$29.95 Requirements X-Plane 12 and X-Plane 11 (2 separate packages) Windows or Mac (Linux not supported) 8 GB+ VRAM Recommended Current version: 1.1 (Feb 15th 2024) Download Size: 1.2 GB (each version) Aircraft download is 1.18Gb, and unpacked, then installed in your X-Plane Aircraft folder 1.38Gb. Authorization on startup is required Documents X-Plane Aircruiser Handbook.pdf The provided manual is excellent, a lot of detail, installation, setup and flying tips... even Limitations and Operations. Designed by Hangar 23 Support forum for the Aircruiser 66-75 ________________  Windows - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD Software: - Windows 11 Pro - X-Plane 12.09rc5 (This is a Release Candidate review). Plugins: Traffic Global - JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 Scenery or Aircraft - EGKA - Shoreham - Brighton City Airport by NKdesign (X-Plane.orgStore) US$15.00 ________________ Update Review by Stephen Dutton 12th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  19. NEWS! - Aircraft Updated : Leonardo Aermacchi M-346 AJT v1.0.0_1r1 by Deltawing Of all the excellent releases since the start of the year 2024, a few really stood out, but one was simply sensational and showed off the X-Plane 12 Simulator at it's maximum capacity. This was the European Trainer Leonardo Aermacchi M-346 AJT by Deltawing, brilliant it is, breathless even. The M-346 is designed for the main role of a lead-in fighter trainer, in which aircraft's performance and capabilities are used to deliver pilot training for the latest generation of combat fighter aircraft. Powered by a pair of Honeywell/ITEC F124-GA-200 turbofan engines of 28 kN (6,300 lbf) thrust each, and designed to reduce acquisition and operating costs, the M-246 is capable of transonic flight without using an afterburner. As good and comprehensive the initial release was, there was always going to be a developer follow up to do adjustments and address the few bugs outstanding. And here it is with the update version of v1.0.0_1r1. Like the aircraft the update is very comprehensive. It has three sections; Fixes, Additions and Improvements. In "Additions" there is now a more realistic canopy open/close switch and Pressure lever. and a better Realistic Nose Wheel Steering system.... (I found the nosewheel didn't turn very wide), so it is related to this. There were added in more "Format" pages into the three MFDs (Multi-Function Display), covering the CNI, COMM1 SET & LIST, VOR/ILS SET & LIST, TACAN SET & LIST and Implementation of the IFF SET MFD format page. There are also Flight Model and Autopilot Improvements. Thrust and Drag, Airfoils Behaviour and Roll & Pitch rate improvements. Particle and Sound Adjustments... and a Plus+ is the new extra livery "BLUE". Fixes: ⁃ Fixed LEF working according to AOA when TEF or Gear is down. ⁃ Fixed Speed Brake limiter when full flaps to be 40 Degrees instead of 50. ⁃ Fixed GHD display not using the standby barometric setting. ⁃ Fixed LEF and TEF Markings on the fuselage to show the correct positions. ⁃ Fixed COMM1, COMM2, TACAN, VOR/ILS & IFF format pages on both UFCP and MFDs to not show if the corresponding system is not operating. ⁃ Fixed Elec System not powering down the displays some times. ⁃ Fixed AoA HUD symbol during Landing to much 8 minimum, 10 optimal and 12 maximum AoA. ⁃ Fixed FPM, CDM, FRL HUD indication. ⁃ Fixed Roll Axis being on the bottom of the plane. ⁃ Fixed Ailerons and Elevators providing braking during landing. ⁃ Fixed black clouds coming out of the engine. ⁃ Fixed Blank spaces in all displays. ⁃ Fixed mach indication on CADI. ⁃ Fixed turbine rotation animation. ⁃ Fixed internal and external fuel to match the real jet. Additions: ⁃ Implementation of a realistic canopy open/close switch and Pressure lever. ⁃ Implementation of a realistic Nose Wheel Steering system. ⁃ Implementation of the CNI MFD format page. ⁃ Implementation of the COMM1 SET & LIST MFD format page. ⁃ Implementation of the VOR/ILS SET & LIST MFD format page. ⁃ Implementation of the TACAN SET & LIST MFD format page. ⁃ Implementation of the IFF SET MFD format page. ⁃ Implementation of a realistic Anti-Ice system. ⁃ Implementation of 53 authentic sound warnings. Improvements: ⁃ Flight Model Improvements. ⁃ Autopilot Improvements. ⁃ CTR adjustment on all displays. ⁃ Thrust and Drag Improvements. ⁃ Airfoils Behaviour Improvements. ⁃ Roll & Pitch rate improvements. ⁃ MFDs System Overhaul. ⁃ COMM1 & 2 format pages on UFCP more accurate representation. ⁃ Refuel probe state is now being saved after changing it. ⁃ Extra Free livery. ⁃ Textures adjustments. ⁃ 3D adjustments. ⁃ Particles adjustments. ⁃ Sound adjustments. X-PlaneReviews did a comprehensive review of the Aermacchi M-346 release here: Aircraft Review : Leonardo Aermacchi M-346 AJT by Deltawing Simulations This is a totally value priced simulation for under US$40 and now newly updated. What you are getting here is the total best of both worlds, higher quality and systems, for that very credible price. The Deltawing Aermacchi M-346 certainly delivers massively in both or all areas. It's nice to fly and nicely balanced as well... but the thing that comes across more than anything in the Aermacchi is the higher realism... with projects like these, the real world gap to simulation is closing in even more.... Highly Recommended! ___________________ Yes! the Leonardo Aermacchi M-346 AJT v1.0.0_1r1 by Deltawing Simulations is now available from the X-Plane.Org Store here : Leonardo Aermacchi M-346 AJT On sale: US$39.95 Main Features: Highly detailed 3d exterior model Highly detailed 3d cockpit model Highly detailed landing gear system Highly detailed pilot figures Dual cockpit Custom remove before flight objects Custom particles system Realistic FMOD custom sounds 4K textures Realistic startup sequence Custom cockpit lights Custom external lights Custom external fuel tanks (droppable) Fully custom electronics system Fully custom environmental system Fully custom autopilot Fully custom Fly-By-Wire system 3 individual fully custom MFD displays, as close to the original as possible Supports Skunkcraft updater 11free 4K highly detailed liveries included Supports VR Requirements: X-Plane 12 (not for XP11) Windows, Mac (M1 and M2 are supported) or Linux 8 GB+ VRAM Recommended Download Size: 800 MB Current version: 1.0.0_1r1 (March 6th 2024) Design by DeltaWing Simulations Support forum: https://forums.x-plane.org/index.php?/forums/forum/753-aermacchi-m-346-advanced-jet-trainer/ https://deltawingsim.com/ ___________________________ NEWS! by Stephen Dutton 9th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  20. NEWS! - Aircraft Updated : FPS Embraer E-195 v1.2.3 Renamed (from Supercritical Simulations Group) Flight Procedures Simulation, have released an update to their excellent Embraer E-Jet 195. This is version 1.2.3 (not one hard to forget). This is a comprehensive update that covers a lot of adjustments and bug changes that followed on with the aircraft on it's release in July 2023... the changelog is quite long! v1.2.3 Changelog - Improved Sasl code for best performance in FPS - Improved Cockpit, External, PBR and material gloss textures - Improved Speedbrake system that now works with the default X-Plane and/or custom FPS speedbrake command - Improved Pushback that now removes the chocks when engaged - Improved Flight dynamics and airfoil data (new lift model) - Improved Taxing behavior and land nose gear concerns - Improved Engine model with new Ram compression - Improved Navigation vertical patch drawing - Improved Navigation Display that only show runways above 3400 feet now - Improved FMA RNAV(non precision approach) RNP APP indicators fixed to meet exact the real ones. - Improved Engine TO-1,TO-2, and TO-3 with ALT/TEMP new calculation for FLEX power - Improved FMC landing speed calculation that now uses the landing weight prediction and can be called from tablet while in the ground - Improved Flight Director TAKEOFF that now respects the altitude waypoint speed/turn transition - Improved FMOD sounds like engines, internal cockpit, cabin and external, winds and air cond - Fixed Cabin Differential pressure and ADV message with a differential value - Fixed Altitude alert sound not working when hit 1000ft to the altitude dailled - Fixed Ice Condition synoptic indicator that was always visible - Added Chocks object to the external model - Added Thermal textures and cockpit windsheld temp. The full X-PlaneReviews release review of the FPS E-195 is here: Aircraft Review : Embraer E-195 by Flight Procedures Simulation Owners of the previous E-Jets by SSG (only the SSG version) can get this FPS E-195 for 20% off. Please find the discount code in your original E-Jets Invoice. So overall if you want a thoroughly decent E-Jet, without the extreme price, then you can't go past this significantly upgraded E-Jet 195 from Flight Procedures Simulations. You could say it is proven and tested, certainly for the older users of the SSG version, who will quickly settle in and be comfortable in their newer updated surroundings. It is great if a clever update to already a good aircraft, and older purchasers of the previous E-Jets by SSG can get this FPS E-195 for 20% off, and that is a great value deal to upgrade the aircraft to X-Plane 12, and all it's modern features. So the E-195 is highly recommended for that great value price, without sacrificing the quality. ___________________________ Yes! - the Embraer E-195 by Flight Procedures Simulation v1.2.3 is NOW available from the X-Plane.Org Store here : FPS Embraer E-195 Price is On Sale... US$55.00 Requirements X-Plane 12 (not for XP11) Windows or Mac (not compatible with Linux) 8GB + VRAM Minimum Download Size: 718 MB Current version : 1.2.3 (March 1st 2024)) Owners of the previous E-Jets by SSG (only the SSG version) can get this FPS E-195 for 20% off. Please find the discount code in your original E-Jets Invoice. Designed by Flight Procedures Simulation (ex SSG) Support forum for the FPS 195 News by Stephen Dutton 8th March 2024 Copyright©2023: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  21. NEWS! - Upgraded to X-Plane 12 : Piper PA-28-180 Cherokee C - XP12/XP11 by AeroSphere Simulations The Piper PA-28-180 Cherokee C by AeroSphere has been upgraded to X-Plane 12, the updated X-Plane 11 version is also part of the package. AeroSphere’s Piper PA-28-180 Cherokee C was designed after the 1960’s model with the square-cut windows and the iconic “Hershey Bar” wing. This specific model, also known as the “C” variant has a four cylinder carbureted Lycoming O-360 that produces 180HP and is equipped with a two bladed, fixed pitch propeller. The Cherokee 180 C featured “push-pull” style throttle and mixture controls instead of the throttle quadrant levers that Piper introduced in 1968. The panel and interior were designed after the same era with updated avionics such as the autopilot and Garmin GPS system that is commonplace among Pipers. Features: Updated for X-Plane 12: Rain effects, new aircraft lighting, and aircraft handling etc… (Still includes X-Plane 11 version, free upgrade to XP12) 4 HD (4096 x 4096) liveries with a plain white texture that can be used for custom paint schemes. Steam gauge classic general aviation panel with required instruments for IFR. Garmin 530 & 430 All gauges are 3D Detailed flight model and interactive 3D virtual cockpit with animated knobs, buttons etc. cabin door, storm window and front/rear baggage compartment door. Toggle button to remove/display yoke Compatible with HDR and normal lighting effects Many textures taken from the actual aircraft Virtual Reality friendly and includes the click regions and hotspots required for VR gameplay. FMOD sounds The Piper Cherokee is what started the main line of Piper aircraft today, and many of the Piper aircraft trace their roots back to the original Cherokee production aircraft. The original Cherokee was produced with three different horsepower models (150, 160, and 180) thus the “180” denoting which model it is. The max gross of the aircraft changed based on the engine and also the climb rate and cruise speeds increased based on the power output. The 180 horsepower variant had an empty weight with an autopilot at 1270lbs. and a gross weight at 2400lbs. resulting in a useful load of 1130lbs. mages and video are courtesy of AeroSphere Simulations Design by AeroSphere Simulations _____________________________________ Yes! - Piper PA-28-180 Cherokee C XP12/XP11 by AeroSphere Simulations is NOW available from the X-Plane.Org Store here : Piper PA-28-180 Cherokee C Price is Currently US$29.95 Requirements X-Plane 12 or X-Plane 11 Windows, Mac or Linux 8 GB+ VRAM Recommended Download Size: 180 MB Current Version : XP12 1.0 (March 5th 2024) ___________________________ NEWS! by Stephen Dutton 8th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  22. NEWS! - Updated to X-Plane 12 : VSKYLABS Scheibe SF-28A Tandem-Falke VskyLabs have updated their Scheibe SF-28A Tandem-Falke (Falcon) motor glider to X-Plane 12. The SF-25C is a German touring motor glider developed from the earlier Bergfalke glider by Scheibe Flugzeugbau. Developed in 1963, the original SF-25 was a high-wing powered glider, but the wing was lowered to create the SF-25B/C. There are a lot of variations of engines powering these gliders, but this model known as the Falke 2000 is using the 60 kW (80 hp) Limbach 2000 EA, and driving the propeller at 3,450 rpm. Basically this German Motor Glider is at it's heart a very basic aircraft. VSKYLABS 'Test-Pilot' Project: designed for use with X-Plane cutting edge flight model environment, featuring superb flight dynamics with authentic performance and flight handling characteristics. Superb Flight dynamics: The VSKYLABS SF-28A simulation was developed to follow the real SF-28A handling and performance characteristics. It is a highly engineered, robust motor-glider simulation model which makes use of X-Plane 12 sophisticated flight dynamics and physics simulation, extracting it to its limits. Simulated systems: The VSKYLABS SF-28A features X-Plane 12 latest native features, systems and physics. This assures a 'high airworthiness' in X-Plane, throughout its update process. Some systems may be restricted to X-Plane default systems algorithms. General cockpit configuration: VSKYLABS chose to design the SF-28A cockpit with a touch of a modern conversion. A simplified NESIS digital avionics package is included with an emulation of the NESIS engine-monitoring screen. Built-in AviTab compatibility is included, and the main NESIS display can be used for displaying the AviTab, in a toggle mechanism. The aircraft is fully functional from the back-seat (with some limitations which are derived from the real-world SF-28A backseat operations). Built for VR: development was tailored specifically for VR, and optimized for 2D usage. Perfect fit for beginner and expert pilots: With its superb handling qualities and docile behavior, the SF-28A Tandem-Falke will serve as a safe training platform for powered flight, as well as for gliding. It is a motor-glider, so it's perfect for thermal-hunting and cross-country flights as well. Wonderful FMOD sound package that includes authentic Limbach engine recordings and an interactive set of dynamic sound layers that will "wrap" your flight perfectly, setting a whole new level of flying experience! Built-in Avitab Plugin Compatibility (AviTab plugin is not included). Detailed manual is included. Paint-Kit is included. Autoupdater based on the SkunkCrafts autoupdater (XP12 only) - all updates are being pushed smoothly without the need to re-download the entire base package (base package will be updated every once in a while to minimize the gap). This project is part of the VSKYLABS 'Test-Pilot' series, designed specifically for use with X-Plane cutting edge Experimental Flight Model. The VSKYLABS Scheibe SF-28A Project was also developed for X-Plane flight simulator with the acknowledgement/approval of the 'Scheibe Air". Images are courtesy of vSkyLabs... Scheibe SF-28A Tandem-Falke XP12 by vSkyLabs is now available from the X-Plane.OrgStore ___________________________ Yes! Scheibe SF-28A Tandem-Falke XP12 by vSkyLabs is NOW available from the X-Plane.Org Store here : VSKYLABS Scheibe SF-28A Tandem-Falke Price is US$29.00, on sale for US$20.30, You Save:$8.70(30%) Requirements X-Plane 12 (not for XP11) Windows, Mac and Linux 8 GB+ VRAM Recommended Current version: 1.0a (Feb 28th 2024) ___________________________ News by Stephen Dutton 8th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  23. NEWS! - Poster Released : FlightFactor Boeing 777 Cockpit Poster Modern aircraft systems are now much more very organised into System groups and workflow, an Integrated systems model mostly to eliminate the Flight Engineer, and to create the two-man cockpit. But before such cockpit changes the panel layouts were complex, and as a budding pilot, or to be reassigned to another aircraft type. You had to learn the cockpit, button, switch layouts. This was called the system schematics. The solution was a system poster, a diagram printed sheet of the aircraft's panels, showing all the positions of the buttons, switches and work flows of the instrument panels. Geeks loved them as well, and for every budding pilot, they were the best way to study the aircraft and it's systems, without actually being in the cockpit. The Boeing 777, was really the first, but also the crossover aircraft that was on the other side of the analog to glass cockpit transition. It was a long haul machine, but it only had a two-man crew setup. Systems were newly intergrated heavily into workflow arrangements, unique at the time in the early 90's, but still the jump to modern cockpit standards. FlightFactor introduced the first quality Boeing 777 Twin-Jet for the X-Plane Simulator back in 2012. In 2024 they are due to release the Version Two (V2) of the same aircraft noted as the "Ultimate", but it's vastly updated over the the original release. This V2 will have the full aircraft simulation (yes a full study level). And to help in learning the aircraft, FlightFactor have released a full system schematics poster to study. Features include Resolution: 13380 x 22850 Includes system schematics Made for and by FlightFactor Demo Displays Highly detailed, the poster covers all the system schematics of the aircraft, making study easier and switch/button location accessible. This poster is now available from the X-Plane.OrgStore for only US10 Produced by Flight Factor - More about the upcoming 777 v2 Ultimate Images are courtesy of FlightFactor _______________________________ The FlightFactor 777 Cockpit Poster is now available from the X-Plane.Org Store here: FlightFactor 777 Cockpit Poster Price is US$10.00 Requirements None Current version : 1.0 (Feb 23rd 2024) ___________________________ News! by Stephen Dutton 8th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  24. NEWS! - Scenery Released : LFKC -CALVI Corsica XP12 by FSX3D Prominent Flight Simulator 2020 developer FSX3D has released one of their most detailed and interesting sceneries for X-Plane 12. This is LFKC - Sainte-Catherine Airport on Corsica. The FSX3D developer has already released a large number of French related sceneries for the MSFS platform, hopefully more will be converted, then follow over to the X-Plane platform. Calvi – Sainte-Catherine Airport is an airport located 6 km southeast of Calvi, a commune of the Haute-Corse department in France, on the island of Corsica. The airport is managed by the Chamber of Commerce and Industry of Bastia and Haute-Corse, and In 2013, the airport registered the passage of 302,672 passengers. Calvi-Sainte-Catherine is an international airport, and as such, it hosts the services of the Air and Border Police and those of Customs. The airport is not open to night traffic. Calvi is located on the northwest coast of the island of Corsica, 95 km (59 mi) from Bastia and 24 km (15 mi) from L'Île-Rousse. It is the fifth-largest commune in Corsica; however, the arrondissement is the smallest. Scenery Features Include Ultra detailed car parks, taxiways and track PBR on all objects Ambient occlusion (Objects and ground) Wet track effects Dynamic lighting Citadel and town of Calvi in 3D Altimeter patch for Ortho4XP Besides the detailed LFKC Sainte-Catherine Airport, the scenery also contains the actual Calvi Citadel commune, and this aspect has also been well modeled here. Overall it is a great destination in the central Mediterranean Sea, between Spain and Italy. All is well value priced at a reasonable US$14.99. This scenery is only available in the X-Plane 12 option. Images are courtesy of FSX3D _______________________________ LFKC -CALVI Corsica XP12 by FSX3D is now available from the X-Plane.Org Store here: LFKC - CALVI, Corsica XP12 Price is US$14.99 Requirements X-Plane 12 Windows, Mac or Linux 8 GB VRAM Minimum Download Size: 451 MB Current version : 1.1 (Feb 23rd 2024) ___________________________ News! by Stephen Dutton 7th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  25. NEWS! - Aircraft Updated : F-104 Starfighter FXP v1.12 by Colimata Colimata has updated the sensational F-104 Starfighter FXP to v1.12 for the X-Plane 12 Simulator. With those blade like wings this was one tricky aircraft to fly. This update has focused on the aerodynamics and the flight model, to help in with more control and for the better handling of this unique aircraft. Flight Controls also are now more responsive. The Skunkcraft's Updater has also now been added for easier future updates. Lockheed F-104 Starfighter is an American single-engine, supersonic air superiority fighter which was extensively deployed as a fighter-bomber during the Cold War. Created as a day fighter by Lockheed as one of the "Century Series" of fighter aircraft for the United States Air Force (USAF), it was developed into an all-weather multirole aircraft in the early 1960s and produced by several other nations, seeing widespread service outside the United States. X-PlaneReviews full comprensive review of the Colimata Starfighter is here: Aircraft Review : F-104 FXP Starfighter by Colimata Version 1.12 (Feb 27th 2024) Improved Flight model Improved Flight controls Systems improvements Updates to the visuals Bug fixes Skunkcraft Updater compatibility Update v1.12 is now available from the X-Plane.OrgStore, or use the mentioned Skunkcrafts Updater The Colimata F-104 is also currently on sale, with a $6.00(13%) saving on the retail price. __________________________ Yes! - the F-104 FXP Starfighter V1.12 by Colimata is NOW available from the X-Plane.Org Store here : F-104 FXP Starfighter Price is : US$45.00 - Sale price US$39.00 Requirements X-Plane 12 Only Windows, Mac and Linux 8 GB+ VRAM Download Size: 941 MB Versions 1.12 - February 27th 2024 Developed by Colimata Support forum the F-104 FXP ___________________________ News by Stephen Dutton 7th March 2024 Copyright©2024: X-Plane Reviews (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved
  26. Hi Stephen, great review, so well detailed I'm surprised the replay feature wasn't mentioned. Just out of curiosity, if you have tried this function which in my opinion, compared to other simulators, is the best ever created and easily manageable, have you noticed that the sound is absent or a subtle ambient noise is reproduced if you start a replay from the beginning of the flight? No problem if you start a replay session with the engines running, then everything works well (I mean the engine and rotor sound), perhaps the volume is too high and not very dynamic when moving away from the external observation point but at least audible (xp12 version, don't know if xp11 version is also affected). I recommend you try it because with no helicopter currently available on the store that I purchased, except the JRX bo-105 and the 407, what is described happens, except for the JRX Gazelle that is the only Jrx aircraft with no sound problem in replay. A shame given the high accuracy of the 3D models. What do you think about it? I'm curious. Greetings, Sirio
  1. Load more activity
×
×
  • Create New...