This is V1.1 of the ToLiss A340-600 Build 1502

Changes from V1.0.3:
Major new features:
- XP12 adaptations
- Custom engine model for more realistic thrust and fuel flow values
- ACARS functionality for direct download of Simbrief plans into the active or the secondary flight plan
- ACARS functionality to retrieve TO data for various runways of the departure airport
- ACARS functionality to retrieve wind data from simbrief flight plan and enter them in the flight plan.
- New ACP interactive screen to request ground services, change fuel or passengers without the ISCS.
- FMGS plan editing overhaul, enabling temporary flight plans also for the alternate plan
- Database holds are now available
- Offset function now available
- Cockpit 3d model rework, including improved switch geometry and moving cockpit seats/arm rests
- Cockpit side windows can now be opened. This will affect air conditioning simulation.
- Rework of the rear section of the fuselage to correctly model the slanted windows.
- Complete retexturing of the fuselage
- Addition of new failure modes for a total of 249 different failure modes, these include now recoverable computer failures
- Implementation of all in-cockpit RESET switches (Airbus long range equivalent to in-cockpit circuit breakers)

Minor new features:
- VLS increases with speed brake deflection
- Made the engine inlets smoother. (Refined grid)
- Added new engine failure modes: recoverable flame out, engine failure with damage, hot start, 
- You can now put on the oxygen mask by removing it from its container
- Added (ETP) circle on ND to display the Equitime point
- Option to control internal and external volume levels via x-plane sliders or custom ISCS sliders
- Added Filtering and rate limiting for FMGS position for more realisitic ND behaviour on ADIRU init completion
- Open pax doors or cockpit windows now have an effect on the temperature in the adjacent zone
- Added option to always have the display brightness rotaries starting at the 80% position, even for cold and dark start
- Functional on-ground deicing via the new ACP interactive screen to avoid nasty surprised during take-offs in icing conditions

Bug fixes:
- Fixed rear fuselage geometry to incorporated sloped windows and cabin floor. Unfortunately this requires rework of all addon liveries with the latest paint kit.
- Corrected trigger condition for NW STRG INOP status message
- Allow regular gear extension with ADR2 data only
- Reenabled constraint editing directly on the FPLN A page


This is V1.0.3 of the ToLiss A340-600 Build 1470

Changes from V1.0.2:
Minor new features:
- Added the Option to have NAV mode reengage automatically on Go Around initiation
- Updated engine model to allow "seeing through" the bypass channel as in real life

Bug fixes:
- Fixed an issue with sounds and particle effect after loading a situation with landing gear retracted
- Fixed dancing XPDR switch after pressing CLR twice
- Increase flap lever sound volume by 3dB
- MCDU CI entry is now range limited
- Inhibited the speed trend indication below 30kts IAS on ground
- Vertical FD guidance during TO rotation much smoother now
- Improved FMA indications for ALT CRZ capture and VS 0
- Improved behaviour of the ALT push button on FCU
- Improved default wing flex magnitude
- Engine sound volume readjustment
- Changed Radalt offset such that radalt reads 0 when first set of wheels touches


This is V1.0.2. of the ToLiss A340-600 Build 1467

Changes from V1.0.1:
Minor new features:
- Electrical system now features battery self test
- ISCS sliders now allow editing the values with keyboard for better precision
- Custom landing gear particle model
- Custom landing gear tire rotation model to allow individual speeds for the forward and aft wheels on the same bogey

- Fault injections can now trigger on increasing or on decreasing values of altitude and air speed
- Added flap animation and nose landing gear animation to taxi cam
- Added CVR self test
- Added chocks to keep aircraft in place at the gate
- Reworked cockpit, ground contact and engine sounds (with friendly support of Henrik Ku)
- Added animated hydraulic lines to landing gear
- Added animated RAT

Bug fixes:
- Resolved an issue with the brake fans
- DC BAT bus shows invalid data, if BAT1 and BAT2 are switched off
- When preselecting a heading on ground, the FCU heading window will initialize with the current heading
- Reduced IRS drift values by half for more realistic values
- Made behaviour of CLR button XPDR panel more realistic
- When selecting flaps 1 for landing, the Status page will now be called (As it should) if status is not normal
- When status paged called automatically, the STS key now lights up and can be used to remove the status page
- When Using Auto Brake to full stop, pressing pedals won't disengage it like is the case in real life
- Minor FMGS fixes
- Corrected locations of wing condensation emitters.
- Moved location of engine particle emitters further aft to better match engine location
- Fixed standby compass
- Corrected pack inhibition condition on ground with doors open (applies now only when engines are running)
- Fixed animation of spoiler 3 actuator on right wing
- Fixed flex temp range
- Fixed FBW roll angle limits
- Improved AP turn direction depending on FCU heading rotation knob
- FCU green button lights now respond to the ANN LT switch as they should (instead of the FCU background light rotary)
- SD Weight/CG on ground indication is now a function of the data entered on INIT B page, and will be replaced by FMGEC estimated weight in flight
- Retuned idle thrust for more accurate descent profile following
- Improved reliability of automatic pitch trim setting prior to take-off
- Increased ground cart pressure for better engine start performance



This is V1.0.1 of the ToLiss A340-600 Build 1454

Changes from V1.0:
Minor new features:
- Added a switch to inhibit the cabin object in all views to reduce VRAM usage on weaker machines
- Added a switch to inhibit only the inseat screens in the cabin without removing the entire cabin for performance optimization
- Sound volumes now respond to the x-plane sound setting sliders for internal and external sounds
- Improved engine fan modelling and engine textures

Bug fixes:
- Increased rolling drag to reduce maximum taxi speed achieved at idle
- Force fuselage model to use high resolution textures in the Hi Def model to avoid appearance of seams
- Replaced ALT mode armed with ALT CRZ mode armed when FCU is set to cruise alt
- Fixed switch animations on EVAC panel
- Reduced maximum step size when rotating FCU knobs
- Fixed ABV/BLW function of the TCAS system
- Retuned pitch take-off transition from ground to flight law
- Retuned flare law, including pitch compensation for ailerons going up on the ground
- Fixed a crash with Direct To Radial Out function
- Fixed an issue with the CI cruise speed
- Improved pitch warning callout conditions
- Improved braking action at low weight
- Fixed visibility of fast rotating fan blades through cabin windows
- Fixed normal map issue in standard def model leading to excessive reflections on cockpit side elements
- Fixed semi-transparent door sills on fuselage
- Fixed position of window plugs in center fuse
- When selecting flaps 1 for landing, the Status page will now be called (As it should) if status is not normal
- Now properly converting fuel amounts from kgs to lbs on PERF pages when imperial units selected
- Minor FMGS fixes
- fixed FBW roll angle limits
- Improved AP turn direction depending on FCU heading rotation knob


This is V1.0 of the Toliss A340-600 Build 1451

Changes from previous versions:
Initial release