Scenery Review: LFKF - Figari, Corsica XP12 by FSX3D   By Dominic Smith   Introduction Welcome to another scenery review, this time set in the beautiful surroundings of Corsica. Unlike most youngsters, my initial curiosity about Corsica was sparked by an unlikely source, the comic book 'Asterix in Corsica'. While the story mainly highlighted the island as a unique spot off the coast of Italy and focused on the adventures of Asterix and Obelix, it greatly captured my interest. Since that initial discovery as a child, and despite numerous "unfortunate" geography lessons (my teacher just didn’t have Asterix’s appeal), I have come to appreciate Corsica as a place of considerable natural beauty and historical depth. This appeal extends to both the casual visitor and the avid explorer, although I have yet to visit the island outside of X-Plane.     Figari South Corsica Airport, located just 3 km northwest of Figari in the scenic Corse-du-Sud département, serves as a vital hub for accessing this enchanting Mediterranean island. Since opening in 1975, the airport has become Corsica’s third-largest, facilitating connections to major cities via airlines such as Air France, British Airways, easyJet, and Ryanair. Conveniently situated 25 km southwest of Porto-Vecchio, it handles upwards of 639,916 passengers annually. More than just an airport, it serves as a gateway to exploring Corsica’s stunning coasts and ancient mountain villages.     Installation & Options The main airport download size is 815MB, with an option to install additional photographic scenery tiles of the area, totaling just under 9GB. Although this might seem large at first, the tiles have been created using a reasonably high zoom level, making them a worthwhile addition, especially for users of simHeaven. Alternatively, you can choose to create your own photographic tiles with Ortho4XP. For this purpose, the developer has included patches to ensure the airport aligns correctly, applicable to users of AutoOrtho as well. There's no online activation or third-party wrappers involved, so while the installation process might differ slightly from the norm, it remains relatively straightforward.   Documentation The provided documentation is quite comprehensive; it includes text documents detailing the various installation options and a full-colour chart of the main airport along with its layout. Given the relatively low cost of the scenery package, I was quite impressed with what was provided, especially considering that more expensive sceneries often offer less.     Initial Impressions Upon opting to install the additional photographic tile of the area, I was immediately struck by its quality. The documentation reveals that this imagery was created using zoom level 17 (ZL17) with custom elevations. From the views provided, it was evident that this enhancement significantly surpasses the default textures and mesh included with X-Plane 12. Beyond the undulating hills, the Mediterranean Sea stretches into the distance, presenting a captivating sight even in this virtual setting.     Ground Details As you descend closer to the ground, the custom orthos remains sharp and clear. This level of detail is particularly beneficial for those who enjoy flying low in general aviation (GA) aircraft. Indeed, if you’re exploring Corsica by air, there really is no better way. However, while the runway textures were sharp and clear, they appeared somewhat clinical. The asphalt's colour was overly intense and seemed unbalanced. Additionally, the transition from asphalt to grass was too abrupt, lacking a smooth blend which could potentially be refined with further development.     Taxiway & Apron Textures On the flip side, the textures of the taxiways and apron were far more aesthetically pleasing. Here, the asphalt and concrete had a more subdued appearance, which seemed more fitting with their environment. The edges where the asphalt met the grass were well-executed, featuring realistic cracks and wear. Moreover, the presence of rubber marks and oil or chemical stains enhanced the authenticity, contributing significantly to the overall visual appeal.     Airport Signage One of the features of the scenery I was most impressed with was the custom airport signage, particularly noticeable on the taxiways and apron. The detailed guides for taxiing aircraft are well represented. A comparison with its real-life counterpart on Google Maps shows that the layout is almost identical, which greatly enhances the authenticity of the scenery. Parking areas for both general aviation and business aircraft, as well as helicopter zones, are clearly marked. Closer to the main terminal, the stands are accurately laid out with all the correct markings. Overall, I was very impressed with the signage accuracy and detail.     Airport Foliage The airport is bordered by several wooded areas that extend right up to the boundaries of the scenery before stopping abruptly. It’s worth noting that with Global Trees installed, this coverage might continue beyond the scenery’s limits; however, I haven't tested this add-on as I do not own the product. However, I did have X-World Europe installed, which might have accounted for the slight increase in tree variations. Situated around the airport buildings, particularly the terminal and control tower, are small shrubs, flowers, and a few mature palm trees.      Main Terminal Building & Surroundings  The main terminal at LFKF, while lacking an interior, is well-modelled and effectively represents its real-life counterpart. Along the length of the terminal, bollards and benches contribute to the overall visual appeal, and the texturing on the concrete walls shows a realistic degree of weathering. However, the terminal area lacks airport signs or posters and feels somewhat lifeless, particularly in what should be the busiest part of the airport. There are a few cars lined up for passenger drop-off and collection, but the noticeable absence of passengers diminishes the overall effect. Hopefully, future updates will address this issue, but as it stands, the terminal building, whilst impressively modelled, requires a bit more liveliness to truly come to life.     Directly across from the main terminal entrance is the main airport car park, which features a variety of custom-made vehicles. These vehicles are a significant and highly welcomed improvement over the stock models typically included with X-Plane. I don’t know about you, but I get tired of seeing the same old models all the time! The vehicles, all European makes, fit the Corsican setting perfectly and add a touch of authenticity to the scenery.     Close to the car park, you'll find several car rental facilities, including Ada, Hertz, Avis, National, and Europcar. These buildings are modest in size but effectively serve their purpose. Given Corsica’s expansive landscapes, renting a car is almost essential for visitors.     Additional Airport Structures Adjacent to the terminal lies the control tower, which I found to be modelled to a slightly higher standard than the terminal. The control tower's numerous angles and curves lend it a quite unique appearance, and the central staircase is a welcome touch.     Next to the control tower is the Terminal Aviation d’Affaires, catering exclusively to business travel. The modelling here matches the high standard of the control tower, with notably good texturing that includes realistic weathering effects. The large glass areas are particularly impressive, although it's a pity there isn’t an interior modelled.     A few metres away from the main buildings, there is a small maintenance building, and next to it, a fire station. The fire truck is positioned further up on the apron, perhaps there was some emergency I missed. Nearby, several smaller buildings of various types and a fuel service area contribute to the functional diversity of the airport. Completing the scene is an animated radar dome, faithfully watching over the airport.     Night Lighting The night lighting at the airport is primarily provided by dynamic lighting from street and airport lamps, which stands in stark contrast to the complete absence of lighting effects from the buildings themselves. This omission is rather disappointing, as it contributes to a rather lifeless atmosphere during nighttime hours. Much like the notable absence of 3D people, I really do hope that the developer will address this issue in future updates.     Performance Overall, I found the performance at LFKF to be pretty impressive, allowing for all settings to be maxed out, apart from anti-aliasing, while running at 1440p. At this resolution, I managed to maintain roughly sixty frames per second during the day. However, during nighttime hours, there is a noticeable drop, with frame rates dipping to the mid to high thirties. This significant reduction may be more reflective of X-Plane's general performance quirks during certain times of the day, nighttime in particular, rather than a specific issue with the scenery itself. Nonetheless, it's an important consideration for those using lower-end systems, as these performance shifts could impact your experience.     Conclusion Reflecting on my time at LFKF, it’s clear that the experience was, on the whole, rather enjoyable. The airport features some well-modelled buildings, especially considering its low price point, and an authentic layout which closely matches its real-life counterpart. The addition of the optional ortho tiles significantly enhances the value of this scenery package, offering a level of detail not commonly found in more expensive counterparts. However, it’s not without its shortcomings. The absence of 3D people and the inadequate night lighting stand out as the most notable flaws. Addressing these issues in future updates could transform this from a good to an exceptional scenery package.     As it stands, I am happy to recommend LFKF to those who have a fondness for Corsica, and perhaps an affinity for adventure reminiscent of our beloved two Gauls. Just as Asterix and his companions would conclude their adventures with a grand feast, albeit always without the bard, this scenery too promises a delightful exploration, if not a perfect one.   ________________________     LFKF -Figari, Corsica XP12 by FSX3D is now available from the X-Plane.Org Store here:   LFKF -Figari, Corsica XP12 Priced at $14.99   Features Ultra detailed car parks, taxiways and track PBR on all objects Ambient occlusion (Objects and ground) Wet track effects Dynamic lighting Animated Radar Pylon Altimeter patch for Ortho4XP Compatibility AutoOrtho Requirements X-Plane 12 Windows, Mac, or Linux 8 GB VRAM Minimum Download Size: 815 MB   Review System Specifications Intel i5 12400 – 32GB RAM - Nvidia Asus RTX 4070 – Windows 10 Home 64 Bit   __________________________________   Scenery Review by Dominic Smith 19 April 2024 Copyright©2024: X-Plane Reviews   (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copying of the content is allowed without consent from the author as per copyright conditions).  

Sound Addon Review : Rotate McDonnell Douglas MD80 Series sound package by Mango Studios   As noted in the review/tutorial of the modification of the Rotate MD-80 Series to use the IAE V2500 Series engines. That coming soon from Mango Studios would be a sound package to modify the original P&W JT8D-200 sounds to the IAE V2500 engine sounds.     This is that sound pack, and both JT8D-200 and IAE V2500 sounds are included, plus both new bonus external and custom internal sounds are also provided in the package. The feature list is extensive as noted here...   Exterior: Custom Sounds for Exterior Aircraft Systems -APU, Hydraulic Pumps, Fuel Pumps, Packs, etc External Environmental sounds, including light and hard rain Custom Engine Sounds for the Pratt & Whitney JT8D Engines     -Exterior start-up/shut-down sound effects     -Exterior spool-up/spool-down sound effects     -Exterior backblast, surround sound, and flyby sound effects Custom Engine Sounds for the IAE V2500 Engines     -Exterior start-up/shut-down sound effects     -Exterior spool-up/spool-down sound effects     -Exterior backblast, surround sound, and flyby sound effects Interior: Custom Sounds for cockpit switches, buttons, covers, knobs, and handles -Overhead Panel, Pedestal Panel, Autopilot Panel, and Eicas Panel all reworked Custom Cockpit System Sounds Including -Higher Quality GPWS Sounds, all the way from 2500ft to 10ft aural warnings. -Higher Quality McDonnell Douglas Warning Sounds -Higher quality and realistic Battery, packs, wipers, and avionics generator effects Custom, and ultra-realistic cockpit environmental effects -High-quality landing gear roll, cockpit rattle effect, gear retraction, gear extension, gear drag, and cockpit wind. New cabin effects include     -New Air conditioning effect, Fuel pump, Hydraulic Pump, Flaps, Slats Custom Interior sounds for the  Pratt & Whitney JT8D Engines, which include:     -New custom, interior startup/shutdown sound effects     -New custom, interior spool-up/spool-down sound effects     -New custom, interior backblast, surround sound, and flyby sound effects Custom Interior sounds for the  IAE V2500 Engines, which include:     -New custom, interior startup/shutdown sound effects     -New custom, interior spool-up/spool-down sound effects     -New custom, interior backblast, surround sound, and flyby sound effects   Downloaded the Sound Pack looks like this...  how to install.     First there are two options in "Engine Volume 1" and "Engine Volume 2"...  the choice is that Eng Vol 1 has "Realistic" normal volume sounds in the cockpit. Eng Vol 2 has a "loud" (or higher level) engine noise in the cockpit... it's your choice?   Note; If you created a separate aircraft for the modification of the "IAE" engines, then you would need to install this Sound Pack in Both of the aircraft files.     Then just select the optional FMOD set you have selected and move it to the Rotate Aircraft root folder.     Next to be installed is the "Plugins", select both "MangoStudio MD80" and "MD-80 Core" folders and install them in the (MD-80) Plugin folder...  It will ask you to replace 102 files in the MD-80 Core plugin folder, select to overwrite the files.     Last install item is the "Sounds". Open the MD-80 Sounds folder, and now replace the "Alert" folder, again you will be asked to overwrite 25 alert sounds....      ...   now the Mango Studios Sound installation is completed.   Starting the Simulation, I loaded the IAE V2500 Engine aircraft. In the X-Plane Plugin Menu, there is now under the "MD-80 Soundpack", a settings menu "MD-80 Sound Preferences".  This is a selection and sound adjustment panel.   There are Options on the left, and a "Volume Control" panel on the right...     In the options we will look at the most important one first. This is the "Engine Select Option", or the selection of either the IAE V2500 or the JT8D-200 Engine sounds. Selecting either will allocate (save) those engine sounds to that aircraft. Here I have selected the IAE V2500 engine.       Other selection options include; "Speedbrake Deploy Sounds", or the sound the Speedbrakes make on landing, "Rotation Noise" the noise when the nosewheel lifts off the runway, here you can also set the point of the rotation degreeº point of when this effect comes into play (5º is default), and finally you can have "Passenger Noise" in the cabin.     There are seven Volume 0%-100% adjust selections; Master, External, Interior, Radio, Environment, User Interface and CoPilot volume adjustments.   Aural feedback Obviously I want to hear the sounds of the IAE V2500 engine...  It's actually really "weird", but not in a negative way. You are always used to to the lower raw compressor sounds of the P&W JT8D, however here it is the high whine of a Airbus A320, on a McDonnell Douglas MD80?   It sounds like the Airbus in every way, even in the reverse thrust mode. I like it because it is what I wanted, a differential feel and environment to the standard MD-80 Series aircraft. The sound is "doppler" in the source, and there is also different source sounds in the rotation from front to back (180º) and so you are highly spatially aware of all the different changes of direction.     Externally the sounds are VERY loud, and my External percentage was finally set as low as 60%, (but I don't like large volume changes from the Internal to the External)...   Start up and spool down sounds are excellent (great spaced timing), however so different in the engine being a more modern installation than the 60's based Pratt & Whitney.     In the cabin, the rear is aurally loud, with the set passenger noise coming in on top, and the engines are set only in the idle mode....   move to along to the front of the cabin and the distance to engines make a difference to the lower sound levels, very good. But oddly so does the noise level of the passengers also decrease, which feels very odd? I am sure they talk as much at the front of cabin, as they do in the rear.     The Rotate MD-88 cockpit was always a very "clickity clackity" cockpit, and one of the main reasons why I love it.... the Mango Studios cockpit sounds are certainly not as loud, or as noisy as the default sounds, even hard to hear. So you have to put the volume up (a lot) if you want to hear them as you do in the Rotate MD-80?   So it is very noticeable in the far lower Speedbrake arm and the trim setting noises, and you can barely hear the usual noisy landing and taxi light switches? This is with the "User Interface" settings set at 100%? They are definitely good sounds, but they are simply not loud enough, or you also don't have enough adjustment to find your own personal level of acceptable switch noise.     In the taxi, the IAE MD-80 sounds great, nice roll sounds and engine noise...     ....  power up the throttles (N1) and you get this lovely high IAE whine rising from the rear, runway rumble is also very good, but those engines sound so excellent as the power gets to the takeoff throttle speeds, this is the point of difference...  I absolutely really love the aural feedback you get here as those IAEs reach full thrust power.     Externally the takeoff noise is really good. Once off the ground you get that nosewheel gear custom wind sound, it is good, but to be noted as far too loud on a quiet cockpit to be realistic? Yes you can turn it off, but that is in creating the opposite effect, volume just needs to be turned down a little to be authentic.     Climb-out and altitude climb sounds are very good, then cockpit settles down into a background rumble in the cruise, that I also like.     Once at cruise altitude I run a flypass of the IAE MD-80...  It is very good, but the rear exhaust sounds when in view are very loud, and stay loud even as the aircraft retreats well and long into the distance... doesn't feel very realistic to be honest.     At each step of the approach, first with the flap extension in that the sounds are extremely realistic, and the engine note also changes with any extra drag applied, then say the lowering of the gear, in it then adds on another heavier layer. Yes this is what should happen on the approach phase, but the point here is in how well you can differentiate between the different wind or drag sounds, as the layers are very well done for a feel of the spatial direction of that particular sound. Get it right as it does here, and it sounds all very realistic.     The real action starts when you touch the runway, up go the spoilers, and then the reverse thrust powers up. Again the spoilers feel a little loud (like the front wheels on takeoff), but the IAE engine reverse blast is excellent, again very A320 IAE in reflection. Aurally the landing noise (touch), drag and thrust noise is excellent from the cockpit, but extremely loud if you are anywhere near the engines in the rear.     I think the idea here is to make the engine package "dynamic" special sounds in being heightened (i.e. nosewheel on rotation and airbrakes), but in other areas the sounds are quieter, in say the cockpit switchgear and in the various sound directions. So you need a bit more of a balance for it to be perfect. So there is a case for some sounds need to be more reduced, and others more heightened to find a better balance...  otherwise the overall dynamics here are very good, even extremely good.   '   JT8D-200 Now you select the JT8D-200 selection on the MD-80 Sound Preferences panel.     Externally the JT8D-200 version sounds better? The rotation of the sound (rear to front) is far better, and feels more authentic. There isn't that blast of consistent rear engine exhaust noise like you get with the IAE, until you push up the throttles, then it sounds excellent.     Again the rear cabin is also extremely loud, even with the interior sounds set at 40% and the throttles set at idle? but the aural reduction to the front of the cabin is excellent, but also set higher level than the IAE, same with the cockpit sound level in the front, higher volume than the IAE. This aspect is to be realistic, the noisy 60's era engine compared to the 80's higher bypass era.     Switchgear noise is the same as the IAE, as you can't again hear them working? unless you increase the volume (a lot). I again miss this interaction with the aircraft. Power up and the JT8D goes LOUD, okay I can live with that, and you feel the louder noise in the cockpit.     Rotate and the nosewheel drag is highlighted, again I feel it is too loud...  but the climbout and the doppler sounds are really, really good...     ... certainly the JT8D is more balanced all round than the IAE. You however get the same high exhaust note when past the camera position, as the loud thrust is still very audible as far or as long as this last image shows, and so again rumbling too far into the distance from the viewer to be realistic.     But don't get me wrong, in flight the JT8D sounds brilliant, in the cockpit, on the flypast and in the air from most directions. Rear cabin passengers would however ask for their fare back with the consistent high noise level? Notable here is that the high rear cabin sound level stays the same at engine idle, and the same in flight (increases though on a full throttle setting), and so why does this annoy me...  because I do a lot of replays sitting in the rear cabin, so to use I would have to turn the volume right down to be seated back here in comfort.   On LEBL (Barcelona) approach, with the gear down and full flap, the wind and drag sounds are again really good, yes in context very similar to the IAE in the audio experience, but certainly not in engine tone, so it is very good expression between both of these aircraft and their different powerplants.     Good sound, or an all round high aural experience can certainly give any simulation a more credible immersion to the user/pilot. It is Simulation's ongoing advances that seeks to create the real environment in your own world. Sound is as important as the visuals, so these sound-packages are a very important addition to your flying, and one of the best options to heighten the simulation...  as I go over the fence at LEBL's Rwy 02, I am totally in there, eyeballing the runway, but also in needing the feedback aurally from the aircraft, that is the important statement, it is what is being signaled to you or is reverberating around you can be the difference between the best experience, or just an average one.     On touch down and into reverse mode, the aural sensation is excellent, yes you get the extra noise from the speedbrakes, but you can turn that off in the options.     Gotta Love the Maddog! _____________________ Summary Mango Studios released a modification for the Rotate MD-80 aircraft to add on the IAE V2500 engine to the already installed Pratt & Whitney JT8D-200. Here is a sound package to deliver custom sounds for both those engines IAE V2500 and JT8D-200 and aircraft interaction.   The package is most effective when you have both engine types installed, as you get both custom sound packs for both engine types. So the IAE V2500 Engine Addon from Mango Studios is highly recommended here.   This is a very good high quality sound pack, that can differentiate the unique sounds of both the IAE V2500 and JT8D-200 engines, the IAE is of course the more modern engine and is mostly associated with the Airbus A320 Series.   The range of custom sounds here are excellent on both engine type installations. Great doppler effects, different source sounds in the rotation from front to back (180º) and so you are highly spatially aware of the different changes. Both engines have excellent spool up/spool down sounds and the excellent reverse thrust activity. Flap, gear and wind noise is also very good and engine thrust realism is excellent. With options that cover custom "Speedbrake Deploy Sounds", "Rotation Noise" the noise when the nosewheel lifts off the runway, and "Passenger Noise" in the cabin. Option for "Loud" or louder engine noise in the cockpit.   However there are few consistencies highlighted the same on each pack. Switchgear/Interaction sound levels are very low compared to the excellent default Rotate MD-80 sounds...  rear engine exhaust is also too (extremely) high and remains too long after the aircraft has passed your point of view. Rear cabin sounds even at throttle idle are not realistic, passenger chatter also disappears as you move forward in the cabin, optional custom sounds (nosewheel & speedbrake) are set higher to be "dynamic" when selected, are not very realistic.   The attraction here with this package is the sounds for the IAE V2500, the tone and feel is completely more modern than the 60's inspired feel of the JT8D low-by pass engine, effectively an Airbus engine on a McDonnell Douglas MD80 aircraft. In this aspect the package is excellent and a great companion to the MOD pack for the IAE V2500, the JT8D-200 is as good, with extra features over the original Rotate sound pack.   Overall I totally love the idea and the choice of the two different engine types for the MD-80. It gives you a very and more flexible choice in flying this unique McDonnell Douglas aircraft, not just in appearance, but also here with a unique aural experience for both types...  well worth the investment! _____________________     Yes! the Mango Studios MD-80 Sound Pack is currently available from the X-Plane.Org Store here :   Mango Studios MD-80 Sound Pack Price is US$14.99   The Rotate MD-88 Pro X-Plane 12 is required for this add-on. The Mango Studios MD-80 IAE V2500 Engine Add-on is highly recommended.   Requirements This is a Sound pack. The Rotate MD-80 is required for this sound pack. Will not work with any other MD-80 Download Size: 52 MB Current version 1.0 (April 16th 2024)   Documentation Manual provided by Mango Studios is a bit basic, hence the Tutorial here in this review Rotate MD-80 Soundpack Manual.rtf _____________________   Aircraft Sound Addon Review by Stephen Dutton 19th April 2024 Copyright©2024: X-Plane Reviews   Review System Specifications:  Windows  - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD Software:   - Windows 11 Pro - X-Plane Version 12.09rc5 Plugins: JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 : RK Apps XPRealistic v2 - US$34.99 Scenery or Aircraft - LIRF - Airport Rome XP  by Aerosoft (X-Plane.OrgStore) - US$25.99 - LMML- Malta International Airport by JustSim (X-Plane.OrgStore) - US$22.30 - LEBL - Barcelona XP by Aerosoft (X-Plane.OrgStore) - US$27.99   (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved  

NEWS! - Aircraft Announcement : Toliss notes the Airbus A330 as next project     At the developers conference in early February 24 in Toronto... ToLiSS put up a chart in the session to note the already released fleet from the developer, but of also which aircraft could come up for development next...   Candidates included the A318, A330ceo, A330neo, A340-200/300 and of course the Airbus A380. The A350 (v2) has already been announced as a joint project with FlightFactor (same arrangement as the current FF A350) at the same conference.   The choice is now between the A330ceo (Current Engine Option), and the A330neo (New Engine Option)...  image depicted here is the default Laminar A330-300, so it is a not a signal of the coming ToLiSS A330 type.     The question "But Which One?", will keep you guessing, but on past record ToLiSS has usually kept away from competing directly with already released products, also they usually always do the NEO versions of the same aircraft (hint A320neo, A321neo). So the A330neo is probably the pick of the two versions. And into also not competing directly with the same A330-300 Laminar offering.   The A330neo has two variants, the -800 based on the older ceo -200 and -300 variants, that has a range of 8,150 nmi (15,090 km; 9,380 mi) with 257 passengers. The second variant is the -900, it covers a range of 7,200 nmi (13,330 km; 8,290 mi) with 287 passengers. Both variants are powered by the Rolls-Royce Trent 7000 which has double the bypass ratio of its predecessor.   ToLiss Features include... Accurate Systems ToLiss Fly-by-wire and autopilot module, with support for Alternate and Direct Law Unique feature: Control Surface hinge moment modelling allows the surfaces to float to the appropriate position after loss of all actuators on a surface or to not reach full deflection if running on a single actuator. fault injection interface allowing to inject custom selected failures, or randomly selected failure based on fault probabilities with over 210 failure modes available. Custom TCAS with resolution advisory function. Terrain on ND and Weather radar available (WX radar works with default X-plane weather engine) Brake temperature model based on the detailed physics of heat transfer between the individual brake components Hydraulics model with proper hydraulic flow computation as function of surface motion, flap/slat motion, gear extension etc. You will see this by the pressure dropping when flying on RAT Custom engine model for accurate thrust and fuel flow modelling including oil pressure and temperature model as well as many engine failure modes. Thrust and fuel flow modelled for each engine type. Special engine logics, such as dual cooling on the PW1127G engine, are also modelled. Detailed model of each ADIRU including alignment, small pressure sensor differences between the units, switching of sources for PFDs and Aps Quantitative bleed system modelling affecting engine fuel flow Electrical system simulation with correct bus reconfiguration and load distribution, simulated electrical transients as well as emergency generation from the blue hydraulic system. Fire detection simulation for engines and APU Custom radio navigation computations including ability to perform backup RADNAV tuning through the RMPs Custom air conditioning model supporting high altitude operations at airports like Cusco in Peru or La Paz in Bolivia without spurious warnings Flight warning system with ECAM actions supporting numerous system failure scenarios, e.g. engine failures, generator failures, hydraulic failures. Custom indicating system including DMC and SDAC simulation. Choice between Multifunctional runway lights or the classic landing light configuration Useability features Situation loading and saving. It is possible to save the flight at any point in time and resume it another day. This can also be used, e.g., to save the position just before approach and practice just the approach many times. This feature reinstates the complete aircraft state (except communications with ATC, such as AOC and CPDLC messages or ground service states.) Autosaving allows recovering where you left off, should the X-Plane session end unexpectedly. Jumping waypoint-to-waypoint through the cruise phase: Shorten your flight to focus on the more interesting parts as you like. Integrated takeoff performance calculator supporting the use of flex temperature. 4 different start-up configurations from Cold and Dark to engines running and ready to go In-screen popup displays or use of x-plane windows for popups Interactive audio control panel to change ground services, fuel, loading, passengers etc. without breaking immersion Electronic flight bag on both sides with Avitab integration, weight and balance computation, take-off and landing performance calculator as well as a user customizable interactive checklist. Print function for AOC messages, CPDLC messages and selected FMGS functions   Release would be around October, as this is also a ToLiSS release period with the other time in being March...   ToLiSS notes that the new A330 is obviously compatible with X-Plane 12, but will also support X-Plane 11 backwards compatibility, but without the X-Plane 12 effects.   Start saving now, price should be around US$89.99! ___________________________   News! by Stephen Dutton 16th April 2024 Copyright©2024: X-Plane Reviews   (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved    

NEWS! - Scenery Released : LFNA-Gap-Tallard, France by FSX3D     FSX3D has made a splash in X-Plane 12 over the last few months with some interesting Corsican and French scenery releases. First was LFKC -CALVI - Sainte-Catherine Airport in Corsica, that was followed soon by another Corsican scenery in LFKF-Figari 16th March.   For their next release, FSX3D has move to mainland France and Gap-Tallard aerodrome, located in the town of Tallard 12 km south-southwest of Gap in the Hautes-Alpes (Provence-Alpes-Côte d'Azur region).   Gap Tallard airport is at an elevation of 1,966 feet (599 m) above mean sea level. The primary runway is designated 03/21 and has a paved surface which measures 965 by 30 metres (3,166 ft × 98 ft). There is also a parallel grass runway measuring 700 by 80 metres (2,300 ft × 260 ft) and paved strip measuring 443 by 10 metres (1,453 ft × 33 ft). The Héliport Aérodrome de Tallard is also part of the scenery.   Features Include: Ultra detailed car parks, taxiways and track PBR on all objects Ambient occlusion (Objects and ground) Wet track effects Dynamic lighting Altimeter patch for Ortho4XP Compatibility AutoOrtho       Gap-Tallard very well value priced below $10 US dollars at US$9.99. This scenery is only available in the X-Plane 12 option. Corsica, and now  Hautes-Alpes are finally getting a lot of X-Plane 12 attention via these FSX3D excellent releases...  check them all out now.   Images are courtesy of FSX3D _______________________________     LFNA-Gap-Tallard, France by FSX3D is now available from the X-Plane.Org Store here: LFNA-Gap-Tallard, France Price is US$9.99   Requirements X-Plane 12 Windows, Mac or Linux 8 GB VRAM Minimum Download Size: 515 MB Current version : 1.0 (April 14th 2024) ___________________________   News! by Stephen Dutton 16th March 2024 Copyright©2024: X-Plane Reviews   (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved    

The MD-90 in almost all cases has almost exactly the same cockpit as the MD-88. Only minor differences on the TRP and a couple others. Only one operator had the MD-11/717 cockpit, if I recall correctly.

NEWS! - Scenery Released : LIMJ - Ligurian COAST Totally insane by BCSceneries     Yes...  that is the title in "LIMJ - Ligurian COAST Totally Insane", but this new package from BCSceneries is part of the original, still long worded "LIMJ - Genova COMPLETE 5 - The Revolution" package for X-Plane 11. That Revolution package consisted of a Genoa scenery that covered an area of 243 squares kilometers with the LIMJ-Genoa airport, the Harbour, the ancient port, the fair and industrial areas with hundreds and hundreds of buildings and architectural complexes, and several thousands of objects like ships, cranes, containers, trucks, parked cars, parked trains and so on... it was HUGE scenery, complex, X-PlaneReviews gave you a quick overview (NEWS! update) here.   Now from BCSceneries is an expanded version of Genoa, also plus it is for X-Plane 12. The coverage now includes three airports (LIMJ Genova Sestri, LIMG Albenga Airport and LIQW Sarzana Luni Military Airport) and three cities in (Genova, Savona and La Spezia), the scenery has been expanded to cover the entire Liguria region in Northern Italy (7000 square Kilometers).     It is a large area covered, and the package has grown from 4.3Gb, to 7Gb in size.   Scenery detail includes; The region include coasts, mountains, plains and cities (each with an harbour). La spezia city include an Italian NAVY with UHD military ships (work by Dario Ruga). The entire region with the cities include 1/0.5 m pixel (ZL 17/18) Orthophotos. City of Genova features 100 UHD landmarks (included the LIMJ airport) distributed in the airport, the harbour, industrial areas, Ancient Port, Fair and residential areas UHD landmarks in Genova city are: La Lanterna (lighthouse), animated Ferris wheel, San Giorgio Bridge (former Morandi Bridge), the fair, the static Canadair airplane at LIMJ (all works by Marcogrifo), Genova's Aquarium, the skycrapers at Administrative center and many others. Savona and La Spezia includes In the Ancient Port (near the Galata Sea Museum), there is a submarine (Nazario Sauro S 518) ultra high detailed. Helipads in the airport and in the fair (Eastern of the city). The airports of Albenga (LIMG) and Sarzana (LIQW) are made in a quite good quality with all the buildings present in real life. Both has single runways. They serves GA traffic. In a part of outback there is hand placed vegetation (for forest and agricultural fields - trees for forest and fruit trees for agricultural fields). Sea from photoreal textures. Extensive documentation for the airports and the city (wikipedia). Included Patch to the compatibility of the scenery with X-Plane 11. LIMJ airport features the runway (10/28) on a peninsula into the sea. It serves airline and GA traffic. The entire airport is built in high definition. It features 20 architectural complexes in HD. The LIMJ Terminal is an UHD model and it has partial pre-rendered generic interiors. Further there are custom ground services moving near the Terminal. Also at the Terminal there are moving (walking) people.  Rebuilt Terminal, that now is updated to the next 2025 year (in real life there are currently works on expansion of the Terminal). LIMJ airport features the runway (10/28) on a peninsula on the sea. It serves airline and GA traffic. The entire airport is builded in high definition. It feautures 20 architectural complexes in HD. The LIMJ Terminal is an UHD model and it has partial prerendered generic interiors. Further there are custom ground services moving near the Terminal. Also at the Terminal there are moving (walking) people.  I've rebuilded the Terminal that now is updated to the next 2025 year (in  real life there are currently works on expansion of the Terminal). The control tower at LIMJ has generic prerendered interiors. Realistic and accurate ILS offset of 2 degrees at LIMJ airport.             Totally "Insane" this scenery is, so the title is totally correct! as only big words come to mind here...  Extensive, Huge, as the area and detail covered in the scenery is well...  MASSIVE!   To update to LIMJ - Ligurian COAST Totally insane, then go to your X-Plane.OrgStore account and download the new "Totally Insane" X-Plane 12 version of the scenery, it is a free update for v5 owners of Revolution, you can purchase the COMPLETE LIMJ Ligurian COAST scenery below. A X-Plane 11 patch is also included if required. _____________________     Yes! the LIMJ - Ligurian COAST Totally insane by BCSceneries is currently available from the X-Plane.Org Store here : LIMJ - Ligurian COAST Totally insane Price is US$32.00   Requirements X-Plane 12 ( XP11 patch included) 8 GB+ VRAM Recommended Download size: 7 GB Current Version: 6.0 (April 11th 2024) ________________   NEWS! by Stephen Dutton 12th April 2024 Copyright©2024: X-Plane Reviews   Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Right Reserved.  

Thank you @Stephen for your honest review, much appreciated. As developer of KTLH I would like to add few comments and explain some decisions in this airport for X-Plane Reviews readers and you.   Regarding custom buildings and objects within the airport area, I focused most of the power on the ATC Tower, Cargo Apron Facility and Ivan Munroe terminal, this objects are the most important for virtual jet airliner pilots. Also I tried to represent the Custom Hangars surrounding South Ramp with Million Air terminal very close to real airport. Unfortunately due to the development cost and profitable reasons nowadays I was forced to pay just a little less attention to a few secondary objects and hangars far away from Munroe terminal. Also meanwhile development process some details like logo's on Million Air terminal and some hangars was missed, now I'm figure it out and I will add them back in further update with some fixes as well.   Ok then I would like explain the airport lighting, most of lights looks pretty accurate on your images (my custom lights with custom masts) except few weird over bloomed light apron masts taken from laminar's library. I partially used them to save time and they were looking very good when I was taking release images, I guess maybe something has changed in latest X-Plane update that I got few days ago but they wasn't looking like presented. I will investigate it soon and will replace them with custom masts as well.   Briefly about ground poly's and airport surfaces quality, I figured out why they are depicting in lower quality than I had, I will fix it and also will add better fidelity decal with solid normal map underlaying all current layers to make surfaces looking more crispy and bumpy from closer look.   I carefully read the review and I promise I'll take a look at how to make the airport more dynamic with ground traffic. Regarding the 3d people I would like to say low poly 3d people are quite expensive for me and I can't promise to add them in large quantity. Also they are absolute static and almost impossible to animate them due to very old x-obj x-plane object format, Ben says laminar's are looking forward to transition from old x-obj to glTf, it will make such things like animated mass of peoples much easier.   Instead of conclusion I want to add that I love X-Plane and it's wonderful community. Everyday I'm studying to do better things and this days I'm engaged in X-Plane more than ever before. Thank you Stephen for your time and majestic review this is incredible helpful.

Scenery Upgrade Review : KTLH - Tallahassee International Airport XP12 by Skytitude   One American State that is highly supported with X-Plane scenery than most, and that is Florida. From the lowest point of Key West, to the state boundary in the north, there are some really great quality destinations for you to chose from. My flying time in X-Plane has found me chris-crossing this one state more than any other. Some developers like FS Designs specialise in the Florida State, another in Skytitude has a few quality destinations in there as well.   This is Skytitude's upgrade for their original KTLH - Tallahassee International Airport X-Plane 11 scenery, released only in November 2021, so it is not as would say an old scenery in quality, it is still available if required for US$19.95. Before that release the only scenery available for KTHL Tallahassee was an odd version from Rim&Co. A messy piece of work, that was discontinued as it had illegal, meaning stolen objects from other developers work, so best forgotten for more than one reason.   So here is the X-Plane 12 upgraded version of KTLH Tallahassee International Airport, which is not actually an international port, as it doesn't have any international services to other countries. However KTLH is noted as a full-service "Service Port" for U.S. Customs. The title allows international cargo and general aviation flights to directly come to Tallahassee, which is the leading cargo handler in the Panhandle area of Florida. Tallahassee handles around 9.5 million pounds of cargo a year,   Most services here are what you would call feeder (Hub & Spoke) regional routes, Atlanta, Charlotte, Miami, Fort Lauderdale, Tampa, Dallas and Washington DC. But Tallahassee is also the Florida State Capital, it is the largest city in the Florida Big Bend and Florida Panhandle region. Tallahassee is also a college town with student population exceeding 70,000, home to the Florida State University, Florida A&M University, and Tallahassee Community College, a large state college that serves mainly as a feeder school to Florida State and Florida A&M. The KTLH city-owned airport is situated five miles southwest of downtown Tallahassee, in Leon County,     The airport covers 2,485 acres (1,006 ha) at an elevation of 81 feet (25 m). It has two runways: 09/27 is 8,000 by 150 feet (2,438 by 46 m) and 18/36 is 7,000 by 150 ft. (2,134 by 46 m). Helicopter operations are generally confined to the Runway 18/36 area, or direct approaches to the Million Air FBO ramp area.     Tallahassee International Airport IATA: TLH - ICAO: KTLH - FAA LID: TL 09/27 - 8,000ft (2,438m) Asphalt 18/36 - 7,000ft (2,134m) Asphalt Elevation AMSL81 ft / 25 m   A new passenger terminal was built just north of the new 09/27 runway on November 2, 1987, and the new terminal prompted officials to rename the airport from Tallahassee Municipal Airport to Tallahassee Regional Airport. On December 3, 1989, the city opened the $33 million terminal, and on February 20, 2000, the terminal was soon renamed the Ivan Munroe Terminal in honor of Tallahassee aviation pioneer Ivan Munroe.   It is a simple layout. A terminal building with a pier that is connecting to a concourse, or a split single concourse into A and B, from the side it is in a H design.     The Munroe terminal is really well replicated here by Skytitude, very realistic with very good building detail and adornments. The terracotta roof is in contrast to the brown main building and pier exposed concrete.     Scenery clutter is very good, but not overwhelming... there are no animated service vehicles here, and it is noticeable in creating a static sort of environment. Note the excellent aerial installation on the forward part of the connecting pier, and the very nicely done ramp lights.     There are eight detailed, white Airbridges A1-A6/B1-B6, like the real ones they come with no branding...  they are powered here by the built in X-Plane 12 "Ground handling" menu. A lot of developers are moving away from the SAM system (and it's problems) and back to this updated older version, in lots of ways it is currently a better solution than the fiddly SAM experience. There also five static walkon/walkoff gates for smaller regional aircraft in A7, A4, A2 - B2, B4, B7.     The landside terminal is very nicely done, even in a walkaround way, with nice well done 3d vehicle carparks and really reat fauna. But there there is no internal terminal detail. There are also no people, or traffic, again in creating a more static feel at TLH than an active one. On the roof are solar panels, in fact there is a loads of solar panels here as we shall see later.     Trees are all X-Plane 12 3D quality, seasonal as well, but you won't get a lot if any snow in Florida. But the fauna quality is high here.     Million Air FBO Next largest facility at TLH is the Million Air Fixed Base Operator. Besides for private operators, Million Air also provides contracted fuel services to U.S. Military and Department of Defense aircraft. TLH is regularly visited by U.S. Navy P-8 Poseidon aircraft, Lockheed Martin C-130 family aircraft, as well as Dornier C-146 and T-6 Texan II aircraft on training missions and practice approaches from nearby AFB.     The ramp area is massive, and surrounded by maintenance hangers and aviation services FL Aviation and Flightline group. Main large FBO executive building is really well done in brick, next to it is the field's FireStation. Missing is the "Million Air" sign that sits outside the entrance, a small but noticeable overlook, but any signage is also missing here at TLH. But overall the detail and fill of this FBO area is very well done with a heliport with 6 landing pads located at South Apron.     Aero Center Tallahassee North is another large ramp for Aero Center Tallahassee and the Epic Flight Academy. The buildings are basic here, as the entrance to the Aero Centre is quite ornamental, missing also is the roof detail of the air-conditioning systems. The brickwork however is well done.     Far north are rows of aircraft storage, and this is a great parking ramp if flying into KTLH while exploring the region to refuel, as there are a few refuel stations set around these aprons for your convenience.   Cargo The freight facility is FedEx. It has two major gates (1 & 2), and three regional ramps for the FedEx feeder network. But as noted it is used as a U.S. customs international feeder "Service Port" area coming into the US.     Control Tower The KTLH field tower is set on the Southside. The facility and its surroundings is excellent, with great roof aerial detail.     Infrastructure Is this where all digital pilots go when they leave the X-Plane mortal coil? Yes it is a cemetery, set to the east of the airport called Southside Cemetery, a big one at that, and well done.     Also west is the City Of Tallahassee Utilities Water Treatment plant, really well done with real (X-Plane) water in the large pools and even in the treatment ponds...  note in the background are the six animated wind turbines.     Before leaving the west it is interesting to note the excellent merging of the Custom TLH airport to the default autogen, here the commercial Infrastructure blends in well with the airport boundary, making it a realistic viewpoint if arriving on Rwy 27.     Obviously the Tallahassee City owners are very big into efficiency and saving the planet. Surrounding the south approach and the left side of Rwy 18/36, are hundreds of solar panel farms. And all well done here, but I wonder if these massive sun farms could blind a pilot on an approach? The noted "largest airport-based solar station in the world" here is however excellent for the visual detail on approaches 36 and 09.     Ground Textures The ground textures are fine, but have no depth of detail, only a sheen, could be even noted as flat to the eye. They look okay with nice grunge, but they are not what you would call "high quality".     As this is an X-Plane 12 scenery, you get the excellent weather effects. And again X-Plane 12 does it's miracle showing...  water/rain and reflections are all very good, certainly in the right lighting conditions... so the PBR reflective (wet) active textures and burnt-in ambient occlusion works well.   Highlight here is the 3d grass, it is excellent and not prone to LOD visuals. The main infield areas are all covered, but there are a few blank areas with no grass...  the grass realism makes a big difference to the quality of the scenery.     TLH Lighting In the overview of KTLH the lighting is good, with the expected (XP12) ICAO lighting standards adhered to...     The ramp areas and external terminal/concourses are nicely lit, with intelligently placed drop lights. Carparks all look great as well...  but the terminal/concourse has no window lighting, making the buildings dark, even blacked out at night?     Other building lighting in Aviation services hangars are also well done with the well done drop lighting, but the main ramp lights for the Cargo ramp area and FBO ramps are weird, they glow, but don't give out any reflective light to the ground or their surrounding area?     I'm going to throw the problem to Laminar Research and not to the developer here, as this new light (flare) bloom effects are coming in the next X-Plane update v12.1.0. We will look at this lighting again when that update is released, so ignore it for now. ____________ Summary Florida is a very well serviced American State for X-Plane pilots to explore with consistent quality destinations. Here with Tallahassee International, it is a very Northern State airport, with great regional connections to Atlanta, Dallas and the Florida State. International in the name is for U.S. Customs "Service Port" only.   The KTLH Scenery from Skytitude is overall excellent, with great field landscaping and and excellent reproduced terminal and the Million Air FBO centre. Aero Center Tallahassee is also very good but missing the finer details. Grass and X-Plane 12 weather effects are also excellent. Fauna and overall layout is also first rate. The minor details are just that in minor, but they still count. Terminal Window lighting is missing, ground textures are a bit plain but have nice grunge, and not a lot of signage except for a FedEx sign, and non-lit at light? No ground or traffic animations also give a very static feel to the scenery.   Yes I really like this excellent Tallahassee scenery from Skytitude, it has a very nice quality about the package, better as well with the X-Plane 12 effects, and has excellent performance or a very light impact on your computer. This KTLH is an upgrade to X-Plane 12 from the still available X-Plane 11 version, but it is a heavily revised and more modernised scenery than the one released in late 2021. There is also an upgrade offer of 25% off for previous users of the XP11 scenery.   How much do I like it? well certainly expect to see KTLH Tallahassee appear in many future reviews from X-PlaneReviews, if any scenery passes that substantial test then it must cover a lot of credentials, most of all in a realistic visual quality...  for that aspect alone, it is great investment! ________________________     Yes!  KTLH - Tallahassee International Airport XP12 by Skytitude is now available from the X-Plane.Org Store here :   KTLH - Tallahassee International Airport XP12 Price is US$19.95   Requirements X-Plane 12 (not for XP11) Windows, Mac or Linux Download Size: 703 MB Current version : 1.0   Owners of KTLH XP11 can purchase this new XP12 version for 25% off, please find the coupon code in the original KTLH Invoice.   Installation and documents: TLH is download of 520Mb download. There are two folders as part of the installation; skytitude-ktlh-tallahassee-xp skytitude-ktlh-tallahassee-xp-b The second "skytitude-ktlh-tallahassee-xp-b" has to physically moved (cut&paste) lower in the scenery_packs. INI, below the main "skytitude-ktlh-tallahassee-xp" folder. All details are noted in the provided; "INSTALLATION GUIDE.   648Mb is installed into your Custom Scenery folder.   Review System Specifications Windows  - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD Software:   - Windows 11 Pro - X-Plane 12.07r1 (This is a Release Candidate review). Plugins: Traffic Global - JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 Scenery or Aircraft -Rotate MD-80 Pro XP12 - (X-Plane.OrgStore) - US$59.95 ____________________________   Scenery Review by Stephen Dutton 11th April 2024 Copyright©2024: X-Plane Reviews   (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved    

NEWS! - Aircraft Released : Sherpa K650T Turbine Bush Plane X-Plane 12 by STMA     STMA - Shade Tree Micro Aviation have released the Sherpa K650T for X-Plane 12. Although based on the Sherpa X-Plane 11 version (Still available here). This new X-Plane 12 version is heavily revised, with an Improved float package, 3D instruments, Improved autopilot response with flight director steering, totally new FMOD v2 sound pack and X-Plane 12 performance tweaks and effects. The Sherpa cockpit has also been completely rebuilt to include a G530 navigator and comm package plus a Garmin GFC 700 autopilot.   The aircraft specifications are interesting in being an experimental bush plane of the Sherpa design. The K650T concept includes a 1050hp Garrett turboprop engine, Wipaire 6100 amphibians, Rossi-Fernandez skis, and Alaska Bush Wheels in a configurable package.   Features Short field performance – 300’ takeoff with full payload, 350’ landing with reverse prop Improved float package from the XP11 version – better stability and tracking 3D instrument package with sync and select features for airspeed, altitude, and VVI A great instrument flyer – stable and responsive Improved autopilot response with flight director steering Revised flight manual and operator manuals for systems FMOD Sound Package. Rain and reflective glass package for realistic weather in Alaska or northern Norway Along that last line – a complete anti-ice package to keep you on mission     Images are courtesy of STMA STMA Developer Support : STMA Hangar and repair shop .Org   The Shade Tree Micro Aviation Sherpa K650T for X-Plane 12 is now available from the X-Plane.OrgStore... ______________________     Yes! the Sherpa K650T Turbine Bush Plane XP12 by Shade Tree Micro Aviation is NOW available from the X-Plane.Org Store here :   Sherpa K650T Turbine Bush Plane XP12 Price is US$29.95   Requirements : X-Plane 12  (not for XP11) Windows , Mac or Linux 8 GB+ VRAM Recommended  Download Size: 175 MB Current version : 12.1  (April 9th 2024) ______________________ News by Stephen Dutton 10th April 2024 Copyright©2024: X-Plane Reviews   (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved  

Aircraft Modification : Rotate McDonnell Douglas MD80 Series IAE V2500 Engine   The McDonnell Douglas MD80 Series MD-80 was the second generation of the DC-9 family, originally designated as the DC-9-80 (DC-9 Series 80) and later stylized as the DC-9 Super 80 (short Super 80). It was a stretched fuselage, enlarged wing, and was powered by higher bypass Pratt & Whitney JT8D-200 engines. The MD80 Series made its first flight on October 18, 1979, and was certified on August 25, 1980.   In response to the environmental concerns that began in the 1970s, Pratt & Whitney began developing a new version of the JT8D engine, designated the JT8D-200 series. Designed to be quieter, cleaner, more efficient, yet more powerful than the earlier -15, -17, -11 and-9 series on the DC-9. The -200 Series power-plant was re-engineered with a significantly higher bypass ratio (1.74 to 1) covering the 18,500 to 21,700 pound-force (82 to 97 kN) thrust range and became the standard engine in powering the McDonnell Douglas MD-80 series. This is the engine on the Rotate McDonnell Douglas MD88. It's a long thin (still low) higher-bypass engine with clam-shell reversers.     Mango Studios have done a modification (MOD) to change this JT8D-200 engine to the later bulkier IAE V2500 Series engine.     The look and feel of the V2500 modification is really well done, with high quality 4K Textures and new PBR (Physical Based Render) effects, the quality and installation is simply excellent. Internal exhaust detail is totally authentic, with the correctly fitted outer fins for the correct airflow around the engine pod. The V2500 does not have the clam-shell thrust reversers, but the same arrangement like on the A320, were as the full cowling door opens for the thrust reversal. This aspect is very nicely done here as well, nice operation, with great internal detail of the air vent grid and internal mechanism.     This IAE engine was installed on the next stretch of the MD80 Series, third generation of the DC-9 family in the MD90. The engines were notably mostly installed on the MD-90-30 Series with the IAE V2525-D5 engine, with the option of upgrading to the IAE V2528 engine.   The V2500 Series is a two-shaft high-bypass turbofan engine built by International Aero Engines (IAE) which also powers the Airbus A320 family. This engine also has an option to add 3,000 lbf for use in Hot & High conditions if needed by activating a switch in the flight deck. The V2525-D5 is fitted with different mounting hardware and accessory gearboxes to facilitate the rear MD-90 T-Tail installation, than say the under wing pylon of the A320.   First look at the larger style of the IAE engine and as the MD90 Series had later the enhanced MD-90s glass cockpit, you could say it is the Boeing 717 aircraft, but it's not, as the 717 (MD95) had Rolls-Royce BR700 family engines installed, not IAE Engines.   Important to note that with this modification, there are no IAE Engine sounds, strangely odd as Mango Studios are well known for their Sound Packages, and the quite different IAE engine note would have been a nice feature, but it has been noted by the developer IAE sounds are coming real soon. The performance of the Rotate MD88 is not changed either, so any power (V2525-D5 111.20 kN (25,000 lbf)) and fuel-efficiency benefits of the IAE are not available with this installation.   Installation Tutorial It is a slightly tricky installation, to switch the original JT9D-200 to the IAE V2525-D5. In the downloaded "IAE V2500 Engine Model" pack there are four three folder items; liveries, objects and a paintkit (psd)...  there is also a manual supplied.     First you have to "duplicate" the original Rotate-MD-80 aircraft, and add into the title "IAE"     From the package objects folder you transfer the 12 files to the MD-88 IAE "objects" folder, and replace (overwrite) the noted 4 files with the new files.     Now for the tricky bit...  You have to go and open up the X-Plane-planemaker application (in your X-Plane root folder), and open up the MD-80-IAE aircraft (acf) file. Under the banner menu "Standard" is the "Objects" selection.     You have to scroll to the bottom of the objects tool, and then using the "ADD" button, insert THREE new layers...     Far right on each layer is a slot to insert the file, with the selection button to the left of the slot... then insert the three new objects (V2500_I.obj, V2500_r.obj, N1_fast.object) in the MD-80 IAE "Objects" folder...  into the correct slot, then "Save" (File) the changes.     If correctly done, then the new IAE powerplant should be seen on the main planemaker page...  and the MD-80 IAE aircraft is now ready in the X-Plane Configuration menu.     Although there is a folder called "liveries", they are actually only the MOD files FOR the liveries, not the completed new livery. So you will still need the original "livery" to add in the MOD livery files...   Each livery folder includes four files; md80_cola_der.png, md80_cola_izq.png, V2500_l.png, V2500_r.png and all four are transferred to the said livery "Objects" folder...     Again you will be asked to overwrite two of the object files. You have to do this same process for ALL the liveries provided.     Note the livery "Delta retro" is in fact Delta Old, or the default livery?     Five livery conversions are provided; Allegiant, Delta (Old), JAL, Lion and Scandinavian. All look excellent, and note how the larger engine can highlight the decals.     If you want to update another favorite livery, there is a paintkit (photoshop) provided, the paint kit covers the L & R engines, so you also have to still add in two files "md80_cola_der.png" and "md80_cola_izq.png" to each new set of the new livery conversion into the same objects folder.   In the air the IAE V2500 conversion looks amazing!     X-PlaneReviews - Rotate MD80 X-Plane 12 update review is here...  Aircraft Upgrade Review : McDonnell Douglas MD-88 Pro X-Plane 12 by Rotate   Summary This is a modification to change the Rotate MD80 (MD88) from the original install JT8D-200 engine to the later bulkier IAE V2500 Series engine as found on the Airbus A320 Series. The IAE engines were notably mostly installed on the MD-90-30 Series with the IAE V2525-D5 engine, with the option of upgrading to the IAE V2528 engine.   Mango Studios have provided a modification kit to change the over the engines by duplicating a Rotate MD80 aircraft and installing the V2500 engine via X-Plane planemaker application, it's not too hard to do, and the tutorial is above. Also provided are MOD files to change five liveries to match the new engine installation and paintkit to do your own changes on other liveries.   This modification really gives you a more modern looking MD Series aircraft, sounds for the IAE are coming soon as well to highlight the package from Mango Studios, that will also be noted here when available.   Simply... a big yes, I love the Rotate MD80 in X-Plane 12, this conversion gives you another engine version to widen the aircraft's appeal and only for less than US$6, so a big yes, yes and it comes more flying options with the Rotate MD80 Series...  winner, winner. _____________________     Yes! the Mango Studios MD-80 IAE V2500 Engine Add-on is currently available from the X-Plane.Org Store here :   Mango Studios MD-80 IAE V2500 Engine Add-on Price is US$5.99   The Rotate MD-88 Pro X-Plane 12 is required for this add-on.   Requirements The Rotate MD-80 is required for this add-on. Download Size: 415 MB Current version: Initial Release (May 9th 2024) Documentation Manual provided by Mango Studios is a bit basic, hence the Tutorial here in this review Manual.pdf _____________________   Aircraft Modification Review by Stephen Dutton 9th May 2024 Copyright©2024: X-Plane Reviews   Review System Specifications:  Windows  - 12th Gen IS1700 Core i7 12700K 12 Core 3.60 GHz CPU - 64bit -32 Gb single 1067 Mhz DDR4 2133 - PNY GeForce RTX 3080 10GB XLR8 - Samsung 970 EVO+ 2TB SSD Software:   - Windows 11 Pro - X-Plane Version 12.09rc5 Plugins: JustFlight-Traffic (X-Plane.OrgStore) US$52.99 : Global SFD plugin US$30.00 : RK Apps XPRealistic v2 - US$34.99 Scenery or Aircraft - LIRF - Airport Rome XP  by Aerosoft (X-Plane.OrgStore) - US$25.99   (Disclaimer. All images and text in this review are the work and property of X-PlaneReviews, no sharing or copy of the content is allowed without consent from the author as per copyright conditions) All Rights Reserved    

This is a truly fabulous and fun craft to fly. Stephen's spot on... the head movements are ingenious, elevating immersion yet another notch, and for me, they're the icing on the A50's cake. Literally setting up a face-fan for my next flight Stephen!lol   A super review for an absolute go-to aircraft. Superb!