Jump to content


  1. como hago para descargar el simulador del UH1H

     

  2. Brussels V2, orthographic textures, need to be colour corrected and should have been, it is not difficult to do. There are approximately 35 titles to correct which I did in photoshop. About 4 layers which include, colour balance (shift away from red), desaturate (about 20), slight increase in exposure.  The only thing they did from  version 1 was to increase exposure which was severely underexposed by about 1 stop and that's all.

  3. hello, does the JARDesign GHD's GPU work with planes like the flight factor 777/767, or is it only an exterior decoration?

  4. Stephen: The MCDU on the FF 767-300 ER provides V1, VR, and V2 during flight setup, but I do not know where to retrieve the REF data to enter in the upgraded glass cockpit (as you refer to in your presentation).  Would you point me to this fourth data entry.  Thanks.

  5. excuseme how i can fix the hill flying in mmmx airport? can you send me an example please?

  6. Globall Art  / CYUL - Montreal International Airport
    https://store.x-plane.org/CYUL--Montreal-International-Airport_p_892.html
     

    Montréal–Pierre Elliott Trudeau International Airport (IATA: YUL, ICAO: CYUL) (French: Aéroport international Pierre-Elliott-Trudeau de Montréal) or Montréal–Trudeau, formerly known as Montréal–Dorval International Airport (Aéroport international Montréal-Dorval), is an international airport serving Montreal, Quebec, Canada, located on the Island of Montreal, 20 km (12 mi) from Downtown Montreal. The airport terminals are located entirely in the suburb of Dorval, while one runway is located in the Montreal borough of Saint-Laurent.
    Trudeau is the busiest airport in the province of Quebec and the third-busiest airport in Canada by both passenger traffic and aircraft movements, with 18.16 million passengers and 235,099 movements in 2017. It is one of eight Canadian airports with United States border preclearance and is one of the main gateways into Canada with 11.2 million or 62% of its passengers being on non-domestic flights, the highest proportion amongst Canada's airports during 2016
     
    Scenery features                                                                                                                                                                                                      
    • Accurate replica of CYUL / YUL -Aeroport International Pierre Elliott Trudeau , updated.
    • Precise modeling based on original references, photos and other research.
    • Customized runways, lines and taxiways, with ambient occlusion included in the textures. 
    • Sun reflections effects on pavements.
    • Fingers Auto Gate with VGDS.

    AutoGate Plugin by Marginal

    • Static objects, vehicles and aircraft are present in this scenery.
    • Avenues and streets with personalized and standard vehicle traffic. 
    • Custom Airport Mesh and adjacent areas.  
    • Underground passages created with Mesh Remexe tool

    Mesh Remexe Tool – by Joz

    • HDR lighting with custom night textures.  
    • Custom textures with ambient occlusion.  
    • Custom Approach Lights (ALS) systems.
    • Included taxi routes for aircraft, "taxi route"
    • Configured to WT3 plugin.
    • Configured Ramp Start. 
    • De-ice system configured for some specific aircraft

    Use Auto Gate Datarefs

    • Winter texture - only around the  Airport area.  
    Animated Airport
    • Configured for World Traffic 3
    • Animated ground traffic and default aircraft traffic.

    Ground Traffic plugin  by Marginal

     
    Included  in this Package
    • CA-CYUL-A-Montreal Airport v1.0
    • CA-CYUL-B-Montreal Mesh v1.0
    • CA-CYUL Winter Textures
    • CA-CYUL Montreal Autogen -  Link in the manual
    • CA-CYUL Montreal Ortophoto HD Zoom 17 - Link in the manual
    • Airport Charts -  Manual
  7. Hi Stephen, 

    I want to say thank you to you for the amazing review. 

    Take care guy. 

    Happy holidays.

    Cheers

    Cami

  8. Hi Stephen,

     

    First and foremost a huge thank you for this amazing and informative web site. As a newcomer to X-Plane I have found this site a very reliable source of information before committing heard-earned cash for add-ons. Then thanks also for electing my DC-3 review as one of your contest winners – wonderful! 

     

    Thought I'd follow up, perhaps prematurely, on the Org Store contacting me or, more specifically, not contacting me! Haven't heard a thing, but just checked and see I used a different email address for the x-plane.org, which may explain the silence. Or I am just too impatient ... ;-). I'd be happy to pass along the details, but found that I cannot send a PM to you. 

     

    Thanks

  9. I really need the X-Plane Evektor EV-55, but i need some changes to go with it.

     

    1)  Need at least 9 passenger seats...can be with or without several passengers.

    2)  Need custom paint job

    3)   What progress has been made and/or on the logo light on the tail?  needs to be placed about half way from the vertical stabilizer on the underside, to create sort of an oval on the vertical stabilizer.

     

    I'll buy as soon as these items are adopted in the Evektor EV-55

     

    [email protected]

  10. Greetings from Grand Rapids, Michigan, USA

    Stephen...Just purchased the UH60 Blackhawk by BFDG not realizing that it is not compatible with X-plane 11.

    Question:  Do you have any information as to if / when this product will become X-plane 11 compatible?

    Thank you!

    Randy

    1. Stephen

      Stephen

      At the moment Randy the Blackhawk has not been updated to XP11 as BFDG have been doing their other aircraft, but I don't think they will take too long in the change over, thrust issues are the hardest to get right, but I don't think they will take too long... SD

    2. cfi-randy

      cfi-randy

      Thank you so much for taking the time to reply, Stephen....

  11. Hi Dionsol

     

    Thanks for the feedback, and I totally agree with you on your comments on the G1000, yes it is slow, yes it kills framerate and yes I hate that map rotation...  Overall again as you mentioned the Eclipse is just that little better at the moment.

     

    But I will note that the G1000 bugs are not correct as well. There seems that something has gone wrong here as more than a problem with the G1000. It was like this when originally released, but Carenado fixed it, but now it is back to that same position it was a year ago? Personally I think it will be fixed pretty quickly and the aircraft will then be fine, I personally would have stuck with it a bit longer, as it would have been very good in the long run.

     

    I looked at your video, and I don't think it was a poor review...  believe me there are far, far worse out there. Thanks for the interest...  Stephen

    1. Stephen

      Stephen

      Hi, If you are ever interested in writing reviews then give me a call...  always interested.

       

      Best regards Stephen

  12. Hello,

    I have the the 10.50r3 version of X-Plane

     

  13. Hello,

    I just buy the Boeing777v183Extended pack for plane OS X el capitan. I can't use the buttons for HDG, Altitude, Speed and more.

    I don't now hoe to do. Those buttons are dead, no responses.

     

    If you have any solutions ?

     

    Best regards

    Claude Pilloud

  14. Hey Stephen,

    I just read your review of the x737 project and noticed you were at YBCG.  I don't have any scenery for Gold Coast or Brisbane.  Do you have a link to what you're using?

    Cheers,
    Jase

    1. Stephen

      Stephen

      Down the (very) bottom of the review is YBCG by tdg and there is a link there to download the scenery...  He does a good YBBN (Brisbane) as well.  SD

  15. STATUS UPDATE

    Hello, and thanks for the support! I am pleased to announce that Aerosoft hopes to release the scenery within a week (on Thursday, to be specific).

    I have fixed some bugs and made some improvements to the scenery since my first post. These changes include more than doubling the texture resolution of some airport structures and ground vehicles, and adding weathering to the terminal and surrounding airport buildings.

    Some of these changes are slightly visible in the updated screenshots below (click on each screenshot for full quality):

    21935342949_30efb14997_o.jpg

    21501140573_74dc827203_o.jpg

    22109701992_71f76b8c78_o.jpg

    21934074060_0364af13bd_o.jpg

    21499420654_2c774696e6_o.jpg

    21934074000_e04735fa9c_o.jpg

  16. This is a game changer.

    Hello everyone. After many months of hard work, I am thrilled to unveil Southwest Florida Intl for X-Plane 10. In the screenshots below, catch a glimpse of one of the most detailed and beautiful sceneries ever created for X-Plane. Handling about eight million passengers a year, Southwest Florida Intl is the second busiest single-runway airport in the United States, and the 45th busiest in the United States overall.

    Key Features:

    • 10 cm/pixel aerial orthoimagery covering the entire airport (approx. 8.41 sq. km)
    • 1 cm/pixel custom ground detail/markings
    • True-to-life pavement, not repetitive textures
    • Never-before-done, hand-placed pavement seams covering the entire airport apron, runway and taxiways
    • Baked-in, ray-traced ambient occlusion on all major buildings
    • Baked-in, ray-traced night illumination on the airport terminal building
    • Specular reflections and all-HDR lighting (no hand-painted lighting)
    • Accurate building heights, measured using LIDAR (Light Detection and Ranging) elevation data
    • Designed using efficient modelling techniques and X-Plane 10-native methods for maximum performance without compromising on quality
    • Animated jet bridges and marshallers at all gates (using the freely available AutoGate plugin by Jonathan Harris)
    • Static aircraft as an option
    • Animated and static ground vehicles
    • Volumetric grass
    • Road traffic
    • Compatible with HD Mesh Scenery v3 by Andras Fabian

    Release Date: This scenery is not really a 'work in progress' any more, it has been completed and submitted to Aerosoft. That being said, a release date is not currently available.

    -- Click on each screenshot below to view the full detail of the scenery in gorgeous 1920 x 1080 pixels --

    21174688504_3d6d2009fe_o.jpg

    21771266596_26dbb8be5f_o.jpg

    21610509709_0b7235d8cf_o.jpg

    21806890861_df4bd4558d_o.jpg

    21610509769_d9fa748165_o.jpg

    21609385360_8d0e2225eb_o.jpg

    21176338293_fbe6589810_o.jpg

    21610509839_61fd004fcc_o.jpg

    21935342949_30efb14997_o.jpg

    21501140573_74dc827203_o.jpg

    21176338383_cffc5ef820_o.jpg

    21771266816_72a065327c_o.jpg

    21174688734_dfcc74529f_o.jpg

    21797419595_d932d40638_o.jpg

    21176338483_a4791d2221_o.jpg

    21174688794_33d883a76c_o.jpg

    22109701992_71f76b8c78_o.jpg

    21934074060_0364af13bd_o.jpg

    21806891251_011fe221fa_o.jpg

    21797419715_c0e2c867de_o.jpg

    21499420654_2c774696e6_o.jpg

    21806891391_553a0c772a_o.jpg

    21610510099_0aa1c9d3c9_o.jpg

    21797419765_b8e4a64804_o.jpg

    21806891451_9687ac854e_o.jpg

    21785655192_f31b89df3a_o.jpg

    21797419825_17d22a9061_o.jpg

    21797419815_d9bb1cfcaa_o.jpg

    21934074000_e04735fa9c_o.jpg

    21609543848_ece55dec02_o.jpg

    21806891611_516f0cdbdb_o.jpg

    21771267156_f146c0e563_o.jpg

    21785655332_4f7808cf33_o.jpg

    21771267176_22089684bb_o.jpg

    21610510259_b431daa3c7_o.jpg

  17. Flying, what else...???

  18. I just purchased xp10 and just joined this website. I have been away from simming for a year and I am starting to reengage. Can I use any or all of the addons from FSX such as planes and scenery that I downloaded from other manufactures i.e. Aerosoft, Iris, Lotus or REX in XP-10 and will they fly? Also, on average how long does it take to load XP-10?

×
×
  • Create New...